• Magazine of the Korea Concrete Institute
• /
• v.9 no.6
• /
• pp.147-156
• /
• 1997

지금까지 국내에서는 콘크리트의 크리프에 관한 실험적 연구가 많이 진행되지 못하여 해당 구조물의 설계기술 도입국의 규준에 따라 크리프를 예측해왔다. 그러나 예측된 크리프 모델이 국내 콘크리트 재료의 특성에 적합한지에 대한 실험적 검증은 제대로 이루어지지 않고 있는 실정이다. 본 연구에서는 국내에서 프리스트레스 콘크리트 구조물에 적용하는 실용 고강도 콘크리트의 크리프 값을 예측하기 위해 동일한 설계기준강도를 갖는 세 가지 배합에 대하여 재령별로 크리프 시험을 수행하고 이 실험결과를 ACI, CEB/FIB, KSCE, JSCE규준들의 크리프 예측식과 비교 분석하였다.시험결과와 이들규준들에 대한 비교분석에 의하면 CEB/FIB-90 크리프 예측식은 비교적 과대 평가되고 ACI 209-92와 JSCE-96의 경우는 과소 평가되었으나 콘크리트 표준시방서 KSCE -96 크리프 예측식은 비교적 시험결과에 근접하는 것으로 평가되었다. 그러나 구성재료의 양적 변동에 '따른 배합별 시험결과의 차이를 반영할 수 있는 점이 보완되어야 할 것으로 보며 향후 많은 실험결과를 바탕으로 국내에서 생산되는 콘크리트에 대하여 보다 정확히 크리프를 예측할 수 있는 연구가 필요하다.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.4
• /
• pp.155-165
• /
• 1997

Since the biggest time-dependent prestress loss of reactor containment structure is due to creep of concrete. the creep is one of important structural factors to be considered for the safety maintenance in the containment structure during design. construction and main enance. This paper is about the creep charactoristies of concrete for the reactor containment structure. In this paper, creep test was performed to show the creep characteristics of reactor containment concrete structure made of the type-V cement. Then, in order to evaluate the applicability of creep prediction equations of recently revised Korean Concrete Standard Specification(KSCE-96) and Japanes Concrete Standard Specification. ACI-209. CEB/FIP-90. and HANSEN, creep test results were compared with prediction results obtained from he equations. From the comparisons, it was shown that the equation of th KSCE-96 predicts creep for younger concrete than 1 year, better than the other equations and that all of the equations predicts creep, for older concrete than 1 year, smaller than test. From regression analysis. a creep prediction equation which effectively predicts creep of concrete due to loading after 1year was proposed.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.503-510
• /
• 2019

Recently, construction technology of RC structures must be examined for creep in concrete. The factors affecting the creep prediction of concrete and the results of creep in domestic construction field were reviewed. The longer the creep test period and the higher the compressive strength, the higher the creep prediction accuracy. The higher the curing temperature, the higher the initial strength development of the concrete, but the difference in the creep coefficients increased over time. Based on the results of creep evaluation in the domestic construction field and lab. tests, a modified predictive model that complements the ACI-209 model was proposed. In the creep prediction of real members using general to high strength concrete, the test period and temperature should be considered precisely.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.154-159
• /
• 2010

Recent concrete structures have been being constructed with higher strength concrete than normal strength concrete. Therefore, it is necessary to review the applicabilities of current design codes and models for the prediction of mechanical behaviors of concrete materials such as creep. To investigate the applicability of creep model with the consideration of the strength level of concrete, three current models (ACI 209R, CEB-FIP MC90 and EC2) were studied and compared with series of experimental results. It was shown that EC2 model which is the updated model of CEB-FIP MC90 better predicts creep coefficient for high strength level concretes and showed relatively good agreements with experimental data.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.337-338
• /
• 2010

In this study, the test results on creep properties of high strength concrete are shown compared with various prediction equations about creep. So in order to investigate the creep properties of high strength concrete, the application possibility of prediction equations about creep is studied compared with the equations in ACI-209 and CEB/FIP-90 for concrete produced using Portland cement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.195-204
• /
• 2004

A series of constant creep and repeated creep tests are performed to investigate the behavior of visco-elasto-plastic materials of chemical grouted sands. In the result of constant creep test, the material exhibits three types of shear strain : elastic, plastic, viscoelastic. The elastic, plastic and viscoelastic strains are linear, i.e., the strains are proportional to the stresses for loading. Good agreement is found between the predicted viscoelastic and test results by the power law and the generalized model. In the repeated creep test, the instantaneous recoverable strain is time-independent and the magnitude of accumulated plastic strain increases with number of cycles. Also it is seen that the accumulated plastic strains are approximately proportional to stress. There are no significant differences between test results predicted values for first cycle, and the differences increase relatively insignificantly with number of cycles.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.851-857
• /
• 2015

In this paper, we estimate the time-dependent C(t) integrals under elastic-plastic-creep conditions. Finite-element (FE) transient creep analyses have been performed for single-edge-notched-bend (SEB) specimens. We investigate the effect of the initial plasticity on the transient creep by systematically varying the magnitude of the initial step load. We consider both the same stress exponent and different stress exponents in the power-law creep and plasticity to elastic-plastic-creep behavior. To estimate the C(t) integrals, we compare the FE analysis results with those obtained using formulas. In this paper, we propose a modified equation to predict the C(t) integrals for the case of creep exponents that are different from the plastic exponent.

• Proceedings of the KSEG Conference
• /
• 2001.03a
• /
• pp.3-14
• /
• 2001

암석은 외력하에서 탄성 및 점탄성적 변형거동을 보인다. 크리프 특성은 일정하중하에서 시간에 대한 암석의 변형으로 장기적인 지반거동을 예측할 수 있는 중요한 요소이며 암석의 점탄성적 성질을 반영한다. 포항지역에 분포하는 미고결 퇴적암인 이암을 대상으로 암석의 기본적인 물성, 역학적 특성 및 크리프 시험을 실시하였다. 일축압축강도의 40-70% 응력수준에서 순간탄성변형률은 하중의 증가에 대하여 선형적인 관계를 보였으며, 일차 크리프변형률은 시간경과에 대하여 로그함수로 적절히 설명되었다. 일차 크리프에서 이차 크리프로 진행하는 과정을 살피기 위하여 약 5일 이상의 시간이 필요하였으며 최종 크리프 변형에 의한 파괴시의 변형률은 약 0.01로 밝혀졌다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.103-111
• /
• 2002

Steady-state creep analysis of power generation turbine blade is carried out considering thermal loads and centrifugal forces. Creep strains and stresses of the turbine blade are calculated for 3-D finite clement model of the turbine blade. From the numerical results, creep life of the turbine blade is predicted. The results of creep analysis during about 200 hours indicate that creep strains of the turbine blade do not reach the rupture strain of GTD111. Creep stresses of the turbine blade are relaxed as time increases. Maximum creep strain occurs at the tip section of the airfoil pressure surface. The maximum creep strain of the turbine blade is expected close to the rupture strain after 50,000 hours approximately. The turbine blade may not have creep damage for the starting procedure of the turbine.

• Journal of the KSME
• /
• v.55 no.10
• /
• pp.26-30
• /
• 2015

이 글에서는 제4세대 원전 고온구조재료인 Gr. 91강을 대상으로 하여 장시간 크리프 수명을 예측하고 파단수명을 확률적 신뢰도를 가지고 평가할 수 있는 방법에 대해 실 예제를 통하여 서술한다.