• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.345-352
• /
• 1983

Using a column of macrorecticular gel beads impregnated with alcohol solution of diphenylcarbarzide (DPC), the enrichment of Cr(Ⅵ) ion in 0.1M sulfuric acid was investigated. The column performance was compared with respect to the types of solid support such as Amberlite XAD and Diaion HP. Diaion HP-20 was found to be most suitable for this purpose. The break through point was increased when increasing the amount of DPC absorbed in the resin and the concentrated sample solution showed higher break through capacity than the dilute one. The extraction of Cr(Ⅵ) was not affected by the presence of 100 ppm Fe(Ⅲ) which amounted to ten times of 10 ppm Cr(Ⅵ) and the presence of other metal ions which amounted to 100 times of 10 ppm Cr(Ⅵ). Because the used gel particles were effectively regenerated with methanol, they were able to be used repeatedly.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.68-68
• /
• 1994

현재의 도금폐수처리는 침전옹집법에 의해 슬러지화 하여 매립되고 있으나, 이 매립물은 침출수를 방출하여 수질오염에 문제가 되고 있다. 특히 크롬폐수는 환원 침전시키고 있으나, 공기에 의한 산화로 재용출 가능성이 비교적 높다. 따라서 크롬 고금폐수를 역삼투압법에 의해 크롬이온을 농축 회수하고, 생성되는 투과수는 도금공정에 재투입하여 공해물질이 발생되지 않는 무배출 공정 (Zero-Discharge System)을 개발하는데 본 연구의 목적이 있다. 본 실험에서는 유가금속 중 크롬을 회수하기 위하여 크롬 모델폐수의 농도, pH등을 변화시키면서 연속공정으로 R.O. Cell에 의한 투과수와 막의 상태 변화등을 살펴보았으며, 크롬 실폐수를 R.O. Cell 테스트와 역삼투기기 (1-2ton/day)를 이용하여 농축수 및 투과수의 재이용에 관하여 실험하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.210-210
• /
• 2015

3가 크롬도금으로부터 크롬도금을 얻는 방법은 1854년 R. D. Buseen의 보고가 최최이고 2년 후 6가 크롬이온으로 부터 최초의 크롬독므이 Geuther에 의해 보고되었다. 초기 3가 크롬도금 프로세스는 도금용액의 안정성이 떨어져서 선택성 이온교환막을 이용한 격막으로 양극을 분리하는 방법이 채용되었다. 그 후 1970년대에 Albright & Wilson사와 IBM-Canning사에 의해 개발된 3가 크롬 프로세스가 기초기술이 되어 개량된 현재의 3가 크롬도금용액이 탄생하였다. 이후 여러 도금약품 회사에서 여러 종류의 3가 크롬도금 용액과 프로세스가 개발이 되어 핸드폰, 자동차 등에 사용이 되고 있으나, 아직도 개선의 여지가 많이 남아 있다고 할 수 있다.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.126-131
• /
• 1998

Reduction of hexavalent chromium to its trivalent form by leachate microorganisms was studied in batch and bench-scale continuous stirred tank reactor. The inoculum was a culture of microorganisms in leachate and capable of providing up to 90% chromate reduction during 72 h batch assay with $20mg\;Cr(VI)\;L^{-1}$ in minimal media containing different levels of leachate (10 to 60%) and glucose (50 to 200 mM). Addition of glucose increased the efficiency of chromate reduction, but adverse effect was observed with increase of leachate probably due to the competitive inhibition between chromate and sulfate ions. The continuous culture experiment was conducted for 124 days using synthetic feed containing different levels of chromate (5 to $65mg\;L^{-1}$) at room temperature. With a hydraulic retention time of 36 h, chromate reduction efficiency was mostly 100% when Cr(VI) concentrations in the reactor were in the range of 5 to $50mg\;L^{-1}$ Specific rate of Cr(VI) removal was calculated as $3.492mg\;g^{-1}\;protein\;h^{-1}$ during the period of 101~124 days from the start-up which showed 81.2% of average reduction efficiency. The results indicate the potential application of using leachate microorganisms for detoxification of hexavalent chromium in various chromium-contaminated wastewater from landfill or tannery sites.

• Journal of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.275-282
• /
• 1981

A simple semiquantitative procedure was developed for the determination of sub-ppm level of chromium(VI) in aquatic samples by using an analytical micro-column packed with diphenylcarbazide(DPC) gel beads. DPC gel beads were prepared by swelling XAD-2 resin(115∼150 mesh in dry condition) in ethanol for 10min, packing into a glass column(1.5 mm bore, 65nm length) and adsorbing 1ml of ethanol solution of $2{\times}10^{-3}M$ DPC for 20min at room temperature. When 0.5ml of ethanol solution containing chromium(VI) was passed through the DPC gel column for 40min, the original white color of the reagent gel turned to red-violet from the up-stream of the column. As the length of colored band was proportional to the total amount of chromium(VI) in the sample solution passed through the column, the concentration of chromium(VI) could be determined from the calibration line which had been prepared by using the standard solution. Chromium(VI) ion as small as from 0.1 to 0.8 ppm could be determined with ${\pm}5{\sim}{\pm}15{\%}$ relative errors. Since other interfering cations were few, 100-fold excess of Fe(III), 50-fold excess of Cu(II) could be masked with EDTA. This method was successfully applied to the analysis of chromium(VI) in industrial effluents.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.43-52
• /
• 1998

The objective of this study is to investigate the optimum conditions of extracting collagen without chrome ion from the leather waste. The effect of temperature, pH, and the concentration of alkaline solution on the collagen extraction has been studied. The result indicated that the incipient denatured temperature of collagen measured by viscosity was $25^{\circ}C$ and the complete denatured temperature was $31.5^{\circ}C$. The optimum solubilization condition for temperature was between $15^{\circ}C$ and $20^{\circ}C$, pH was 1.5, the concentration of alkaline solution was 3% of sodium hydroxide. The almost complete chrome ion separation was possible around the pH of 1.5. The separation efficiency of chrome ion from tannery waste was more than 99.5%. Extraction efficiency of crude protein from leather waste was about 89.5%. The hydroxyproline and collagen content in the extracted crude protein were 8.53% and 63.62%, respectively.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.92-98
• /
• 2015

In this study, phenol-based activated carbons (ACs) were fluorinated at various fluorine partial pressures (0.01~0.03 MPa) and the $Cr^{6+}$ ion adsorption of fluorinated ACs was investigated. According to BET and XPS results, the specific surface area and total pore volume of fluorinated ACs increased by 24.7 and 55.8%, respectively, and fluorine functional groups were introduced to AC surface. The most optimized condition of $Cr^{6+}$ ion adsorption was confirmed at the fluorine partial pressure of 0.02 MPa. And also the removal efficiency of $Cr^{6+}$ ion was up to 98% at 300 mg/L of the initial concentration, and these results showed an approximately three-fold increase compared to that of using untreated ACs. Furthermore, the $Cr^{6+}$ ion adsorption of fluorinated ACs was completed in less than 30 min in contrast with untreated ACs, which was expected to be an increase of the affinity between $Cr^{6+}$ ions and ACs surfaces by fluorination.

• Korean Journal of Microbiology
• /
• v.33 no.2
• /
• pp.125-130
• /
• 1997

Microbial reduction of hexava1ent(VI) to trivalent(lII) chromium is regarded as one of the mechanisms that confers resistance to bacteria. In order to verify this hypothesis, we compared Cr(VI) resistance with Cr(VI) reduction among 20 phenotypically distinct environmental isolates from Cr-contaminated and uncontaminated soils. With glucose as an electron donor, Cr(VI) reduction by washed cell suspensions ranged from 0.014 to 0.305 mM Cr(VI) reduced $h^1$. Cr(VI) resistance of the isolates were measured by growth inhibitions on a liquid medium containing 2 mM Cr(VI) based on their decrease of $A_{630}1$ as compared to the controls without Cr(VI). The isolates had a broad range of resistance from no inhibition to 93.4% inhibition of their growth. Upon correlation analysis, there was no significant relationship between those two phenomena. At a population level, a comparison of % resistant viable counts among the Cr-contaminated and uncontaminated soils showed 19.1 % and 0.4% of their total viable counts, respectively. The difference of % resistance between two site,. strongly suggested that the Cr(VI) present in the soils influences natural selection for resistant phenotypes. However, it is unlikely that the Cr(VI) resistance is dependent solely on the reduction as judged by the correlation analysis.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.50-55
• /
• 1983

A comprehensive study of the electrical properties of low-dose Si implants in Cr-doped GaAs substrates has been made using the Hall-effect/sheet-resistivity measurement technique for various ion doses and annealing temperatures. The samples were implanted at room temperature and annealed with silicon nitride encapsulants in a hydrogen atmosphere for 15 minutes. H-type layers were produced at all dose levels investigated, and the optimum annealing temperature was 850$^{\circ}C$ for all doses. The highest electrical activation efficiency was 89% for Cr-doped GaAs substrates. Depth profiles of carrier concentrations and mo-bilities are highly dependent upon ion dose and annealing temperature. Significant im-plantation damage still remains after an 800$^{\circ}C$ anneal, and a 900$^{\circ}C$ anneal produces signi-ficant outdiffusion as well as indiffusion of the implanted Si ions.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05a
• /
• pp.539-542
• /
• 2001