• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.931-935
• /
• 1991

본 연구에서는 유효응력확대계수로서 피로크랙 진전수명을 평가할 수 이용되 는 크랙열림비(본 논문에서는 후술하는 최대응력에 대한 크랙 열림응력의 비를 크랙 열림비로 하다)가 진전수명에 미치는 영향을 평가하기 위한것으로서, 제1보에서는 실 험에 의하여 크랙 열림점을 실측한 결과 측정입치에 따라 다른 값을 나타내며 수명평 가법 크랙 선단으로부터 떨어진 곳(크립게이지를 이용한 크랙마우스등)에서 측정한 크 랙 열림점 값을 이용함이 보다 정확함을 밝혔다.본 제2보에서는 크랙열림비가 수명 평가에 미치는 영향을 상기의 파라미터 영향도 평가수법을 이용하여 평가하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1635-1639
• /
• 1991

본 연구에서는 제1보에서의 수법을 이용하여 초기크랙길이의 분포를 고려한 재료의 불확정성 평가수법을 제시하고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.511-517
• /
• 2009

In this paper an finite element approach for the edge crack analysis of silicon-steel sheet during cold rolling is presented. Based on the damage mechanics, the proposed approach follows the analysis steps which are composed of damage initiation, damage evolution and fracture. Through those steps, we can find out the initiation instant of crack and resulting propagated length and shape of the crack. The material constants related to fracture is experimentally obtained by tension tests using standard sheet-type specimen and notched sheet-type specimen. To evaluate the prediction accuracy, we performed a pilot rolling test with a initially notched sheets. It is shown that the results obtained by the approach converged to the experimental one concerning about the direction and length of propagated crack. The capability of the proposed one is demonstrated through the application to the actual silicon-steel rolling mill.

• Tunnel and Underground Space
• /
• v.11 no.4
• /
• pp.301-310
• /
• 2001

Gypsum blocks with sixteen flaws have been prepared and tested in uniaxial compression. Results from these experiments are compared with observations from the same material with two and three flaws. The results indicate that the cracking pattern observed in specimens wish multiple flaws is analogous to the pattern obtained in specimens with two and three flaws such as initiation and propagation of wing, and secondary cracks and coalescence. Wing cracks initiate at an angle with the flaw and propagate in a stable manner towards the direction of maximum compression. Secondary cracks initiate and propagate in a stable manner. As the load is increased, secondary cracks may propagate in an unstable manner and produce coalescence. Two types of secondary cracks are observed: quasi-coplanar, and oblique secondary cracks. Coalescence is produced by the linkage of two flaws: wing and/or secondary cracks. From the sixteen flaws test, four types of coalescence are observed. Observed types of coalescence and initiation stress of wing and secondary crackle depend on flaw geometries, such as spacing, continuity, flaw inclination angle, ligament angle, and steppings.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.138-144
• /
• 1990

In order to understand the probabilistic nature of fatigue crack propagation, not only the calculation of failure probability and parameter sensitivity, but also the clarification of probabilistic nature of various parameters should be executed. Therefore a method to evalute synthetically the effect of each parameter on the distribution of fatigue crack propagation life is required. In this study, the effects of the initial crack size and other paramaters on the distribution of fatigue crack propagation life are discussed according to the appropriate normalization of the life distribution, the validity of this method is also shown. Such an investigation as the present work may be useful to understand the nature of the life distribution and to utilize the probailistic fracture mechanics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.799-804
• /
• 2011

A thermal cycling test was conducted on a chip resistor solder joint with real-time failure monitoring. In order to study the failure mechanism of the chip resistor solder joint during the test, the resistance between both ends of the resistor was monitored until the occurrence of failure. It was observed that the monitored resistance first fluctuated linearly according to the temperature change. The initial variation in the resistance occurred at the time during the cycle when there was a decrease in temperature. A more significant change in the resistance followed after a certain number of cycles, during the time when there was an increase in the temperature. In order to explain the failure patterns of the solder joint, a mechanism for the solder failure was suggested, and its validity was proved through FE simulations. Based on the explained failure mechanism, it was shown that prognostics for the solder failure can be implemented by monitoring the resistance change in a thermal cycle condition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2391-2397
• /
• 1993

The distribution of fatigue crack growth rate is influenced by the measuring interval and methods of calculation of crack growth rate. The purpose of this paper is to suggest a method for the evaluation of crack growth rate distribution without the influence. The constant ${\Delta}P$ test and the constant .DELTA.K test are executed by using the CT specimen. The measuring interval of (${\Delta}a$/W=0.0067~0.014) crack length is not affected by methods of the calculation of the fatigue crack growth rate is suggested.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.924-930
• /
• 1991

본 연구에서는 크립게이지와 스트레인게이지를 사용하여 정확한 크랙 열림점 의 값을 제시하고져 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.133-141
• /
• 2002

This paper describes a versatile finite element technique which has been used to investigate wide range of structural defects of practical importance. The procedure automatically remeshes the three-dimensional finite element model during the stages of crack growth. Problems include the surface cracks in leak-before-break situations, the shape development of multiple surface defects.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.171-178
• /
• 2003

Wing and secondary cracks are unique types of cracks observed in rock masses subjected to uniaxial and biaxial compressive loading conditions. In this study, morphological features of wing and secondary cracks developed in gypsum specimens are investigated in the macro and micro scales. Along the path of wing crack, microtensile cracks are observed. Microtensile cracks coalesce with pores and show branch phenomenon. From the onset of the wing crack, multiple initiations of microtensile cracks are observed. Microtensile cracks show tortuous propagation paths and relatively constant aperture of the cracks during the propagation. It is shown that microtensile cracks propagate by splitting failure. At the micro scale, microfsults are observed in the path of the secondary cracks. Along the path of the secondary cracks, separation of grains and conglomerate grains, oblique microfaults, and irregular aperture of microfault are observed. These features show that the secondary cracks are produced in shear mode. The measured sizes of fracture process zone across the propagation direction near the tip of wing and secondary cracks range from 10$\mu{m}$ to 20$\mu{m}$ far wing cracks and from 100$\mu{m}$ to 200$\mu{m}$ for secondary cracks, respectively.