• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.15-15
• /
• 1993

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.463-469
• /
• 1988

The effects of moisture content and particle size of rice flour on the physical properties of the extrudate were examined by using a autogeneous single screw extruder. The moisture contents tested were in the range of 17-28% and the particle sizes were 18-60mesh and 60-120mesh. Samples were taken at different temperatures from the start-up period to the steady state operation. The expansion ratio increased and bulk density decreased as the moisture content and particle size of the flour decreased. The cutting force decreased and the air cell size became uniform as the moisture content and particle size of the flour decreased. As the moisture content increased, the yellowness of the extrudate powder decreased, while the lightness increased, the apparent viscosity increased and the water soluble index decreased. Gelatinization and partial dextrinization were apparent during the extrusion process, and the degree of dextrinization was appeared to be influenced by the levels of moisture content and particle size of rice flour.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.425-425
• /
• 2010

유기 발광 소자는 차세대 디스플레이 소자와 조명 광원으로서 많은 응용성 때문에 활발한 연구가 진행되고 있다. 하지만 청색 유기 발광 소자는 적색과 녹색 유기발광소자들에 비해 상대적으로 발광효율이 낮고 색 순도가 떨어지며 수명이 짧기 때문에 전색 유기발광소자를 구현하는데 문제가 있다. 이런 문제점을 해결하기 위하여 청색 유기 발광소자의 재료 개발, 다층 이종구조 및 형광/인광성 물질의 도핑에 대한 연구가 진행되고 있다. 이와 더불어 색안정성과 색순도가 향상된 진청색 고효율 청색 유기발광소자는 백색유기발광소자의 응용성 때문에 이에 대한 연구가 주목을 받고 있다. 본 연구에서는 청색 유기 발광 소자의 발광효율을 높이고 색안정성과 색순도를 향상하기 위해 4,4'-Bis (2,2'-diphenyl-ethen-1-yl)biphenyl (DPVBi) 와 4,4'-Bis(carbazol-9-yl) biphenyl (CBP)로 구성된 나노크기의 폭을 가진 우물 형태의 이중 발광층 구조를 사용한 청색 유기발광소자를 제작하였다. 제작된 청색유기발광소자의 전기적 성질과 광학적 성질을 조사하여 색안정성 및 색순도 향상 메카니즘을 관찰하였다. DPVBi/CBP 이중 발광층을 가지는 청색 유기발광소자에서 CBP의 HOMO 에너지 준위의 값이 3.2 eV로 매우 크기 때문에 정공을 막는 정공 장벽층의 역할을 하게 되어 정공이 발광층에 머무르게 된다. 또한 DPVBi의 LUMO 값의 크기 5.8 eV, CBP의 LUMO 값의 크기는 6.3 eV이므로 상대적으로 CBP의 전자에 대한 주입장벽이 크기 때문에 발광층에 머무르는 전자의 양이 증가된다. 청색 발광층에 사용된 이중 발광층은 단일 발광층에 비해 더 많은 전자와 정공이 존재하기 때문에 전자-정공 재결합 확률을 높였으며 재결합 영역이 발광층 중심의 이중발광층 계면으로 이동하여 발광 영역이 국소화되어 전압변화에 따른 색의 변화가 적고 색순도가 더욱 향상되었다.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.253-258
• /
• 1994

The effect of hole size and hole-to-hole distance in the braided and laminated composite was studied in terms of tensile strength, pin bearing strength, and flexural strength of S2-glass fiber braided polyester. The tensile strength reduction with hole size was well fitted with he Whitney and Nuismer's prediction for the laminated composite. The characteristic distance was measured to be about 1.6mm for braided composite and 1.8mm for laminated one. The effect of distance between the centers of two circu lar holes on tensile strength was negligible when the distance between these two holes was larger than 4 times of the diameter of circular hole for both braided and laminated composite. The side effect was diminished when the center of hole was located 3 times farther than the diamet.er of the hole. The pin bearing strengths was decreased with the size of pin hole for both braided and laminated composite.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.582-592
• /
• 1990

Retention behavior of lanthanide-$\alpha$HiBA complexes was studied on the cation exchanger (LC-18 coated with $C_{20}H_{41}SO_4^-$). An equation predicting retention of lanthanides in isocratic or gradient elution with sodium ion and $\alpha$-HiBA concentration was derived from ion exchange equilibria of metal-ligand complex system, respectively. The relations between log k' and log [Na$^+$] /log [$\alpha$-HiBA) showed non-linearity in isocratic elution. In gradient elution a good linearity between log k' vs log R was obtained. The values of slopes (log k / log R) gave good agreements between calculation and experiment. Individual capacity factors ($k'_{Ln}^{3+}, k'_{LnL}^{2+}, k'{LnL2+}) and stability constant (${\beta}_1$, ${\beta}_2$, ${\beta}_3$) of lanthanide-$\alpha$HiBA complexes were calculated by the non-linear least square fittings using the retention equation. The correlation coefficients of lanthanides were shown better than 0.9996 between experiment and calculation.

• The Korean Journal of Applied Statistics
• /
• v.28 no.5
• /
• pp.1035-1046
• /
• 2015

Variance components models incorporate various random factors in the form of linear models. There are two experimental Layouts for the classification of factors under variance components models: nested classification and crossed classification. We consider two-way variance components models and investigate the effect of experimental Layout on the performance of model selection criteria AIC and BIC. The effect of experimental Layout is studied through a simulation study with various combinations of parameters in a systematic fashion. The simulation study shows differences in performance of model selection methods between the two classification. There is a particular tendency to prefer the smaller model than the true model when the variance component of a nested factor becomes relatively larger than a nesting factor that is persistent even when the sample size is not small.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.272-275
• /
• 1991

Physicochemical properties of commercial corn, sweet potato, potato, wheat and mungbean starches were investigated. Amylose contents of each starch were 23, 20, 24, 28 and 39%, whereas water binding capacities were 92, 87, 83, 79 and 77%, respectively. Average granule size of potato starch was considerably higher than that of other starches. In terms of color, lightness and whiteness of sweet potato starch were relatively lower than those of other starches. Comparing with other starches, the viscosity of potato starch was the highest level. The results also showed that textural properties of potato and sweet Potato starch gels were similar. Corn starch gel had lower hardness and higher cohesiveness than others.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.428-435
• /
• 2007

The thermomechanical property, morphology, and gas permeability of nanocomposites of ultra high molecular weight polyethylene (UHMWPE) with two different organoclays are compared. Hexamethylene benzimidazole-mica ($C_{16}BIMD-Mica$) and Cloisite 25A were used as reinforcing fillers in the formation of UHMWPE hybrid films. Dispersions of organoclays with UHMWPE were carried out by using the solution intercalation method at different organoclay contents to produce nano-scale composites. Transmission electron microscopy (TEM) micrographs show that some of the clay layers are dispersed homogeneously within the polymer matrix on the nano-scale, although some clay particles are agglomerated. We also found that the addition of only a small amount of organoclay is enough to improve the thermomechanical property and gas barrier of the UHMWPE hybrid films. In general, Cloisite 25A is more effective than $C_{16}BIMD-Mica$ in increasing both the thermomechanical property and the gas barrier in a UHMWPE matrix.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.3
• /
• pp.208-211
• /
• 2003

We have investigated the dimensional and microstructural dependence of magnetic properties of CoP nano-wire arrays fabricated by electrodeposition on AAO(anodic aluminum oxide) templates with different-size nanopores. Our results indicate that the magnetic properties of nanowire arrays can be varied with their dimensions and microstructures. As for the CoP nanowire arrays with the diameter of 20nm, it was found to have the coercivity more than 2.6kOe due to the shape anisotropy and squareness(Mr/Ms) of $\~0.8$. The CoP nanowire arrays with the diameter of 200m, however, showed very different magnetic properties depending on the current densities. Nanowires fabricated at $5mA/cm^2$ had stronger tendency to have the preferred crystallographic orientation of (002) parallel to the nanowire than those fabricated at $35mA/cm^2$ These microstructural differences are the reason why CoP nanowire arrays prepared at different current densities exhibited different magnetic properties.

• Electrical & Electronic Materials
• /
• v.3 no.1
• /
• pp.36-44
• /
• 1990

본 연구는 34wt%(5Ce-Didymium)-Fe-1wt%B 합금의 분말입도, 성형압력 및 소결온도 에 따른 자기적 성질에 관하여 연구하였다. 그리고 각각의 자기적 성질에 영향을 주는 인자를 알아내기 위하여 밀도측정, 미세조직 및 자구를 관찰하였다. 미세조직은 금속현미경을 이용하여 관찰하였으며 자구는 Bitter법으로 관찰하였다. 결과는 아래와 같다. (1)분말의 입도와 결정립 크기가 작아질수록 경질자기 특성은 증가하였으며 소결온도가 증가할수록 경질자기 특성도 증가하였다. 그러자 압력은 1000kg/$cm^{2}$일때 가장 좋은 경질자기 특성이 얻어졌다. (2)결정립이 클수록 자구의 구조는 복잡했으며 미세한 결정립일수록 큰 결정립에 비해 큰 보자력을 갖는다. 포화된 후에는 거의 모든 결정립이 단자구였으며 열적으로 탈자되었을 경우에는 모두가 multi-domain였다. (3)가장 우수한 경질자기 특성은 3-5.mu.m의 분말을 사용하여 1080.deg.C에서 소결한 후 590.deg.C에서 열처리한 시편에서 얻어졌으며 (BH)$_{max}$는 214.6kJ.m$_{-3}$이다.