• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1373-1377
• /
• 2008

강우-유출에 의해 성층화된 저수지로 유입하는 하천수는 저수지 표층에 비해 낮은 수온과 높은 부유물질(SS) 농도를 가지므로 저수지 표층수보다 상대적으로 높은 밀도를 유지한다. 하천으로부터 유입한 밀도류는 유속에 의한 관성력이 두 수체의 밀도차에 의한 음의 부력보다 큰 구간까지는 저수지 표층을 따라 진행하지만, 두 힘이 같아지는 지점에서 밀도류는 더 이상 진행하지 못하고 저수지 수면 아래로 침강하며 이 과정에서 수체간의 많은 혼합이 일어난다. 따라서 홍수시 유입한 탁수의 침강점에 대한 정확한 예측은 수질관리를 위한 현장조사, 그리고 탁수거동 해석 및 최적관리대책 마련에 중요한 요소이다. 본 연구의 목적은 홍수시 대청호로 유입하는 하천 밀도류의 침강위치를 홍수규모별로 경험식과 수치모델을 통해 산정함으로써 두 방법 간의 장 단점을 비교하고, 탁수 현장조사와 최적관리를 위한 기초정보를 제공하는데 있다. 유입수의 모의조건은 그 동안 대청호에서 발생한 홍수 크기를 기준으로 9개의 등급으로 나누었으며, 저수지 성층조건은 여름철 탁수가 유입되기 전의 발달된 성층구조를 적용하였다. 유입수와 저수지 성층구조의 특성치는 밀도 Froude 수($Fr_i$)로 나타냈으며, $Fr_i$ 조건별로 침강점 위치를 저수지 단면을 삼각형태로 가정한 Hebbert et al.(1979) 경험식과 2차원 수치모델로 산정하여 그 결과를 비교하였다. 대청호로 유입한 탁수는 홍수규모에 따라 대정리 수역에서 회남수역 사이 구간에서 침강하였으며, $Fr_i$ 값이 클수록 침강점 수심이 깊어지는 경향을 보였다. 경험식으로 산정한 침강점 수심은 정상상태 조건을 가정하므로 홍수에 의한 수위변화를 고려하지 못하며, 실제의 불규칙한 하상표고를 일정한 하상경사로 가정하기 때문에 2차원 모델의 결과보다 과대산정하는 경향을 보였다. 따라서 홍수가 연속해서 발생하며 수위변화가 심한 국내 저수지 여건에서 하천 유입 밀도류의 거동을 보다 정확히 예측하기 위해서는 2차원 또는 3차원 수치모델을 적용하는 것이 타당할 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.531-537
• /
• 2011

This research was performed to evaluate the decay hazard for exterior above-ground wood in Korea. The Scheffer index (decay hazard index) was determined using the climate data of 72 different locations obtained from the website of Korea Meteorological Administration (KMA), and the wood decay hazard map was created. Jeju, Seogwipo, Gwangju, and Jeonju showing above 65 of Scheffer index values were considered to be high decay hazard zones. The rest showed the values in the range between 35 and 65, meaning the moderate decay hazard zones. However, the annual Scheffer indexes largely varied, which suggests that many moderate decay zones could turn into high decay regions with the climate change. Especially, considering that Korean weather tends to turn into the weather of subtropical region, the decay hazard of Korea seems to have high possibility to be gradually increased.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1341-1350
• /
• 2019

This research deals with algorithm for forest fire severity classification using multi-temporal KOMPSAT-3A image to mapping forest fire areas. The recent satellite of the KOMPSAT series, KOMPSAT-3A, demonstrates high resolution and multi-spectral imagery with infrared and high resolution electro-optical bands. However, there is a lack of research to classify forest fire severity using KOMPSAT-3A. Therefore, the purpose of this study is to analyze forest fire severity using KOMPSAT-3A images. In addition, this research used pre-fire and post-fire Sentinel-2 with differenced Normalized Burn Ratio (dNBR) to taking for burn severity distribution map. To test the effectiveness of the proposed procedure on April 4, 2019, Gangneung wildfires were considered as a case study. This research used the probability density function for the classification of forest fire damage severity based on R software, a free software environment of statistical computing and graphics. The burn severities were estimated by changing NDVI before and after forest fire. Furthermore, standard deviation of probability density function was used to calculate the size of each class interval. A total of five distribution of forest fire severity were effectively classified.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.49-52
• /
• 2008

The tensile and bond performance of GFRP rebar are different from those of conventional steel reinforcement. It requires some studies on concrete members reinforced with GFRP reinforcing bars to apply it to concrete structures. GFRP has some advantages such as high specific strength, low weight, non-corrosive nature, and disadvantage of larger deflection due to the lower modulus of elasticity than that of steel. Bridge deck is a preferred structure to apply FRP rebars due to the increase of flexural capacity by arching action. This paper focuses on the behavior of concrete bridge deck reinforced with newly developed GFRP rebar. A total of three real size bridge deck specimens were made and tested. Main variable was reinforcement ratio of GFRP rebar. Static test was performed with the load of DB-24 level until failure. Test results were compared and analyzed with ultimate load, deflection behavior.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.69-74
• /
• 2011

As a way to propose a method for the establishment of practical damage-minimizing plan for chemical plants, the release scenario was established by using API-581 BRD and the effect zone was estimated by the KS-RBI program supporting the quantitative cause analysis. And the risk assessment was performed. As a result, we found that to minimize the damage of a chemical plant, it is effective to use four release hole diameters (small, medium, large and rupture) and release time estimated according to the classes of detection and isolation systems. In addition, it can be safely said that through appling the damage areas considering weighted average by failure frequency and worst-case simultaneously, industrial sites can come up with the effective emergency response plan.

• Korean Journal of Environment and Ecology
• /
• v.23 no.4
• /
• pp.302-308
• /
• 2009

For the proper tree management of Taxus cuspidata, distributed in the High 1 Ski Slope construction area in Baekwoonsan, Jeungsun-gun, Kangwon-do, the growing states of 323 trees(including transplanted 57trees) are investigated. Tree height, rootcollar diameter, D.B.H., stem condition, apical shoot, dead branch, needle growth condition, 2-year-old needle loss, root condition, tree form are investigated. Taxus cuspidata are mainly growing at the sites, high elevated mountain ridge or slopes facing north. Growing states of Taxus cuspidata, distributed in Baekwoonsan are relatively better than those of Taxus cuspidata and Abies koreana at other subalpine zone in Korea. Damaged trees are mainly due to root-removal through transplanting, root-damages by raising the ground level and digging. Several methods of Taxus cuspidata conservation were suggested.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.47-55
• /
• 2000

To date many software engineering cost models have been developed to predict cost, schedule, and effort of the software under development. The COCOMO Ⅱ is well- suited for the new software development life cycle such as non-sequential and rapid- development processes. The traditional regression approach based on the least square criterion is the most commonly used technique for empirical calibration in the COCOMO Ⅱ model. It has a few assumptions frequently violated by software engineering data sets. The source data is also generally imprecise in reporting size effort, and cost-driver ratings, particularly across different organizations. And that the outlier for the source data is a peculiarity and indicates a data point. To cope with difficulties, in this paper, we propose a new regression method for calibrating COCOMO Ⅱ post-architecture model based on the minimum relative error(MRE) criterion. The characteristic of the proposed method is insensitive to the extreme values of the data in the empirical calibration. As the experimental results, It is evident that our proposed calibration method MRE was shown to be superior to the traditional regression approach for model calibration, as illustrated by the values obtained for standard deviation(^σ), and prediction at level LPRED(L) measures.

• Analytical Science and Technology
• /
• v.13 no.1
• /
• pp.89-95
• /
• 2000

Three grades of activated carbon fibers (ACFs) were prepared from various precursors of plantic, synthetic, and mixed fabrics of viscose rayon and cotton. The ACFs an exhibited type I isotherms on the adsorption of nitrogen or argon. Micropore analysis revealed that the ACFs have uniform micropore size distribution in which their peak diameters were in the range of $5.6{\pm}0.3{\AA}$. The BET surface area of ACFs up to $1600m^2g^{-1}$ was proportional to the adsorption capacity of iodine. The BET values of the ACFs prepared were proportional to the burn-off degree of the products.

• The Korean Journal of Applied Statistics
• /
• v.29 no.4
• /
• pp.657-678
• /
• 2016

This study deals with the effect of online word-of-mouth (OWOM) variables on the box office. From the result of statistical analysis on 276 films with audiences of more than five hundred thousand released in the Korea from 2012 to 2015, it can be seen that the variables showing the size of OWOM (such as the number of the portal movie rater, blog, and news after release) are associated more with the box office than the portal movie rating showing the direction of OWOM as well as variables showing the inherent properties of the film such as grade, nationality, release month, release season, directors, actors, and distributors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.278-278
• /
• 2018

현재 우리나라에서는 행정안전부의 풍수해저감종합계획, 사전재해영향성검토협의, 재해위험지구개선사업 등에 해외에서 개발된 상용프로그램이 사용돼 접근성 저하로 인해 지자체 방재담당자의 실무나 대학에서 연구용으로 다루기에는 한계가 있다. 이에 본 연구에서는 내수침수, 외수침수, 2차원 침수해석으로 구성하여 GUI 기능을 강화한 통합침수재해지도 작성시스템(i-FIM, Integrated Flood Inundation Modeling system)을 개발하여 입력자료의 구성 및 매개변수의 수정이 용이하게 함으로써 하수관망 등에 부분적인 설계 변경이 있는 경우 지자체 방재담당자가 간단한 작업을 통해 침수영향 변화를 쉽게 파악할 수 있도록 하였다. 또한, 상세한 지형의 반영이 필요한 도시지역의 2차원 침수해석의 경우 계산격자 망의 크기가 작아질수록 소요되는 계산시간이 기하급수적으로 증가하는 한계가 있어 i-FIM에서는 계산격자를 $2{\times}2$, $3{\times}3$, $5{\times}5$ Subgrid 형태의 격자를 적용하고, 병렬프로그래밍과 계산시간조정 기능을 추가하여 2차원 침수해석 모형의 계산 속도를 향상시켰다. 이를 실무에 적용하기 앞서 2006년 집중호우로 인해 안성시에서 발생한 제방 붕괴사상, 2016년 태풍 차바로 인해 울산시에서 발생한 제방 월류 사상을 통해 침수흔적도와 비교하여 검증을 실시하였다. i-FIM에서 최종적인 2차원 침수해석 결과는 2017년에 개정된 '재해지도 작성 기준 등에 관한 지침'의 침수심 등급 구분의 색채 설정에 따라 각 격자별 침수심을 표출함으로써 표준화된 재해지도 작성이 가능하도록 하였다. 또한, 포털사이트의 지도 및 위성지도에 표출함으로써 침수 위험이 발생할 수 있는 지역의 현재 이용 용도를 파악하여 침수재해에 대한 상세한 대책을 마련할 수 있을 것으로 판단된다.