• Proceedings of the Korean Society for Information Management Conference
• /
• 2006.08a
• /
• pp.41-48
• /
• 2006

도서관 품질 평가를 위한 척도로 개발된 라이브퀼 플러스(LibQUAL+)를 국내 대학도서관에 적용하여 분석을 시도하였다. 이용자 집단별(신분, 연령, 성별, 전공, 도서관 방문횟수, 도서관 홈페이지 접속 횟수) 사전 기대와 실제 인식 사이의 갭을 평가하고 그 원인을 분석하였다. 평가 후 실제 도서관 경영에 필요한 서비스 개선방안을 마련하고 이용자의 인식 향상 및 요구사항에 대처하기 위한 활동과 책무를 밝힘으로써 도서관 서비스 품질 평가를 수행하고, 그 방안을 마련하였다.

• Korean Security Journal
• /
• no.17
• /
• pp.361-381
• /
• 2008

Quality rating of machine security systems is difficult because both tangible and intangible services are included. However, still, the research template applied the SERVQUAL model with the intention of confirming machine security systems' service quality formation and experimentally inspecting the relationship between service quality and customer satisfaction. Therefore, the following highlights the experimental research outcomes and their implications for small-scale businesses utilizing machine security systems in the Daegu region. First, after observing whether the determining factors constitute service quality, four components were found to have significant influence on customer satisfaction. Additionally, in observing any differences in their influences, the following in order were observed as having influence on customer satisfaction: empathy, assurance reliability, responsiveness, and tangibility. Moreover, though companies‘ newest facilities and equipment are important, it can be concluded that a company employees’ prudent consideration, individual interest, reliability, and assurance for the customer carry greater importance. Secondly, though we intended to survey machine security systems by employing the SERVQUAL model, determinant factor analysis results found applying SERVQUAL model in its original state a challenge. According to results from determinant factor analysis, the basis for forming service quality is determined by assurance reliability, empathy, tangibility, and responsiveness. Furthermore, in future research, while more accurately distinguishing between assurance and reliability, a more appropriate model must also be considered for modification in domestic machine security system industry‘s service quality evaluation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1836-1843
• /
• 2010

This research examines the possibilities of a traditional costume revival and digital exhibition as well as the application of 3D virtual clothing modeling data in order to preserve and record a disappearing costume heritage to realize it as a social education tool through the newly emerging technology of 3D virtual clothing. A 3D revival of costumes worn by royal families and aristocrats was accomplished through the 3D animation and simulation technology of Maya 2011 (Autodesk, Inc.) and Qualoth (FX Gear, Inc.). The simulation shows the possibility of a 3D revival and digital exhibition of costume heritage. However, further technology support to analyze and realize the composition and design is still necessary to develop the digital contents of traditional garment culture that includes skirt pleats, petticoat silhouettes, that exaggerates the skirts and knots of traditional upper garments (Jeogori). Further studies on design attributes of historic costumes and the upgrading of 3D simulation software are required to realize 3D virtual clothing. Korean traditional costumes will be revived as a cultural content in the digital era as a result of outstanding issues detected by this study.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.91-98
• /
• 2011

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of mounting a quill system to lubricate cylinder parts for smoother operation. In order to apply the common-rail lubricating system to the developed cylinder lubricator as the second research stage, the quill system with a progressively quantitative distributor is improved in the electronically controlled quill system with an accumulating distributor. In this study, the effects of lubricator motor speed, plunger stroke and cylinder back pressure on oil feed rate, maximum discharge and delivery pressures are experimentally investigated by using the electronically controlled quill system with an accumulating distributor in the developed cylinder lubricator. It is found that the oil feed rate of the electronically controlled quill system with an accumulating distributor is larger than that of the quill system with a progressively quantitative distributor because of the increase of delivery speed and volume by changing the location of accumulator in the same experimental condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.26-36
• /
• 2012

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of mounting a quill system to lubricate cylinder parts for a smooth operation. In order to apply the common-rail lubricating system to the developed cylinder lubricator as the second research stage, the mechanical quill system with a progressively quantitative distributor (M.D.S.) is improved in the electronically controlled quill system with an accumulating distributor (E.D.S.). In this study, the effects of lubricator motor speed, plunger stroke and cylinder back pressure on oil feed rate and inequality rate are experimentally investigated by applying E.D.S. to the developed cylinder lubricator. It is found that the oil feed rate of E.D.S. is higher than that of M.D.S. because of the increase of delivery speed and volume by changing the role of accumulator in the same experimental condition. It can be also shown that, in E.D.S., the inequality rate is decreased a little or hardly unchanged as the cylinder back pressure and plunger stroke is elevated, while the inequality rate increased in M.D.S.. The inequality rates of E.D.S. and M.D.S. are lowered as the lubricator motor speed is increased.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.1-8
• /
• 2007

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke marine diesel engine is of great economic importance. In Korea, authors first developed a motor-driven cylinder lubricator for a Wartsila Switzerland large two-stroke diesel engine. The characteristic of the developed product is that can control automatically the oil feed rate with a load fluctuation by the motor drive and the offset cam. For manufacturing the reliable and useful products, however, it is necessary to investigate further characteristics and to improve performances as a cylinder lubricator. In this study, the effects of pump motor speed, plunger stroke and cylinder back pressure on oil feed rate, maximum discharge and delivery pressures are experimentally investigated by using the electronically controlled quill injection system and distributer in the developed cylinder lubricator. It is found that the oil feed rates of electronic control and mechanical type quills with the in-cylinder back pressure are differently characterized by the role of accumulator, the viscous resistance of contact area, etc. It can be also shown that the maximum discharge pressure of the electronic control quill is lower than the mechanical type one but the maximum discharge pressure difference of two types decreased as plunger stroke is small, and the maximum delivery pressures of two types increased as plunger stroke, motor speed and back pressure are elevated but the maximum delivery pressure of mechanical type is higher than the one of electronic control type.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.115-125
• /
• 2007

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke marine diesel engine is of great economic importance. In Korea, a motor-driven cylinder lubricator for a large two-stroke marine diesel engine manufactured by $W{\ddot{a}}rtsil{\ddot{a}}$ Switzerland Co., Ltd. was first developed by authors through the joint research of industry-university in 2002. The characteristic of the developed product is that can control automatically the oil feed rate to a load fluctuation by the motor drive and the offset cam. The performance of the product is not also inferior to the conventional one. For manufacturing the reliable and useful products, however, it is necessary to investigate further characteristics and improve the performance of a cylinder lubricator. In this study, the effect of quill with and without accumulator on maximum discharge pressure, delivery delay duration and oil feed rate relative to motor revolution speed using plunger stroke as a parameter is experimentally investigated by using the developed cylinder lubricator. It is found that the maximum discharge pressure with accumulator is higher than that of no accumulator as plunger stroke and motor revolution speed are elevated, and the delivery delay duration with accumulator is shorter than that of no accumulator as plunger stroke and motor revolution speed are increased. Also, oil feed rate with accumulator is less than that of no accumulator except for a plunger stroke of 2 mm as plunger stroke and motor revolution speed are raised.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.36-41
• /
• 2013

One of the problems in grinding process using a machining center(MC) with a small diametric wheels is machining error due to decrease of the quill diameter. In this study, side-cut grinding is performed with a vitrified bonded CBN wheel on the machining center. Grinding experiments are performed at various grinding conditions including quill length, quill diameter and depth of cut. The effect on the grinding force, machining error and surface roughness due to the change of the quill rigidity are investigated experimentally. The slenderness ratio of the quill is significant factor to analyse the change of the grinding force and machining error.

• Journal of the Korean Home Economics Association
• /
• v.44 no.7 s.221
• /
• pp.153-162
• /
• 2006

This study was attempted to investigate the possibilities of fitness evaluation of virtual model using 3D clothes modeling software. For the purpose, two one-piece dresses were made with two kinds of patterns using Qualoth program, and then each dress was fitted to a real model and a virtual model, and the results were compared and discussed. The result of this study was as follows. First, the fitness evaluation of real model showed a significant difference only at a little difference in figures (1-2.5cm) of the pattern, while any significant difference in appearance was not found in case of a virtual model fitted a dress made out of a pattern with the same difference in figures. Second, items to evaluate a difference in patterns using 3D clothes modeling software were shoulder line, the distance between shoulder points, armhole line, ease of armscye depth, and overall appearance. Because all the items fall under design lines which make up outer lines of a cloth, it can be said that the Qualoth program is good for representing design, rather than exposing a small difference in patterns.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.87-97
• /
• 2009

A technology in development called CACD (Computer Aided Clothing Design) can reproduce fashion shows by utilizing computers, and is of particular interest. Considering the growth potential of this area, the purpose of this study is to present the development potentials that CACD technology will bring to the fashion area and to promote the diversity of the fashion industry. This will be realized by identifying the current status of CACD and its reach in the field of Fashion, followed by an in-depth analysis of its application. The methodologies employed in this study are as follows; in-depth study of related literature, field research of business firms, and investigation on Internet data. For the systematic advance of CACD, the development of user-friendly programs for 3D clothing design is of the utmost priority. The four technologies that should be intensively developed to enhance the development of the clothing industry through the utilization and commercialization of CACD are as follows; First, technology capable of performing accurate three-dimension measurement of the human body is needed. Second, technology which realizes automatic pattern formation is needed. Third, the nature physical properties of the material and textile design when applied to pre-formed patterns must be expressed similarly to the real thing. Last of all, an integrative technology which can conduct fast and accurate clothing simulations must be developed.