• 제목/요약/키워드: 쾌적수면

검색결과 29건 처리시간 0.029초

여름철 수면시 온열쾌적감 평가 - 제3보 : 실내온도 상승에 관하여 - (Evaluation of Thermal Comfort during Sleeping in Summer - Part III : About Indoor Air Temperatures Rise -)

  • 김동규;금종수;김세환
    • 설비공학논문집
    • /
    • 제18권7호
    • /
    • pp.535-540
    • /
    • 2006
  • This study was performed In evaluate sleep efficiencies and conditions for comfortable sleep based on the analysis of Physiological signals under variations in thermal conditions. Five female subjects who have similar life cycle and sleep patterns were participated for the sleep experiment. It was checked whether they had a good sleep before the night of experiment. EEGs were obtained from C3-A2 and C4-A1 electrode sites and EOGs were acquired from LOC (left outer canthus) and ROC (right outer canthus) for REM sleep detection. Sleep stages were classified, then TST (total sleep time), SWS (slow wave sleep) latency and SWS/TST were calculated for the evaluation of sleep efficiencies on thermal conditions. TST was defined as an amount of time from sleep stage 1 to wakeup. SWS latency was from light off time to sleep stage 3 and percentage of SWS over TST was calculated for the evaluation of sleep quality and comfort sleep under thermal conditions. As result, the condition which raise a room temperature provided comfortable sleep.

베개 충전물의 소재가 쾌적수면에 미치는 영향 (The Effects of Pillow Filling Materials on the Comfortable Sleep)

  • 성민정;성수광
    • 한국의류산업학회지
    • /
    • 제8권6호
    • /
    • pp.713-720
    • /
    • 2006
  • Heat conductivity, height, size, elasticity of pillow, stability of shape, hygroscopicity, ventilation, temperature and easy movability, and so on, are considered to be some of major conditions that affect the comfortable sleep. Considering those factors together, the thermal properties, height, shape and feeling of touch, etc, of pillow must be taken into account. Though studies have been conducted to figure out the physical properties of mattress or pillows from the perspective of factors related to the environment of sleep, they are not enough to be used as an index to evaluate the qualitative aspect of sleep. This study tries to consider the effect of pillow filling materials on the comfortable sleep, for which EEG, ECG, EOG, EMG, RT, etc, are to be measured in an attempt to provide the basic data required in proposing the condition that may lead to a sound and comfortable sleep. Three types of pillows that are sold in the market were used for this research in order to evaluate the quality of sleep depending on the filling materials of pillow. All data were statistically processed and the following conclusions were drawn. It was found that the pillow with feathers provided the best comfort as the pillow A turned out to have the shortest sleeping latency(SL) from the perspective of comfort. The pillow B which used the polyethylene is deemed to be suitable for fatigue relieving purpose as it turned out to have the highest slow wave sleep(SWS), but no statistically significant difference was validated. Moreover, the pillow C which used the natural wool was found to have the narrowest contacting area of the pillow and head and provide a great warm heat comfort that may led to a sound sleep because the temperature below the pillow took the longest time to rise.

침대 사용시의 제반 현상에 대한 실태 조사 (Survey on the Use of Bed for Comfortable Sleeping)

  • 이현자;홍경희
    • 한국생활과학회지
    • /
    • 제10권4호
    • /
    • pp.349-355
    • /
    • 2001
  • The use of bed in Korea has increased steadily, however, intensive survey on the general use and consumer's evaluation of their beds have not been performed sufficiently, yet. Thus, the purpose of this study is to investigate the actual use of the consumer and their degree of evaluation for the component of the bed as well as their feeling of discomfort on the various parts of body. More than one hundred users of commercial beds were responded to the survey. The results obtained were as follows: (1) Complaint about the depression of the mattress and the noise from the bed was apparent in the current use of beds. (2) Important physical variable related to the comfortable sensation of the sleeping was the degree of support in maintaining the natural shape of the spine and waist. Durability and the degree of hardness of the mattress were also important physical parameters of bed perceived by consumer. (3) The degree of discomfort on the back and waist during sleep was closely related to the comfort evaluation of the bed.

  • PDF

수면시 바닥표면온도에 따른 적정 환기량에 관한 연구 (A Study on the Proper Quantity of Ventilation through Changing Floor Temperature in Sleeping)

  • 김동규;이성;김세환
    • KIEAE Journal
    • /
    • 제10권1호
    • /
    • pp.19-24
    • /
    • 2010
  • Modern people are spending most of time in interior area. Indoor air environmental problem is one of the most effective factors influenceable to human health. Furthermore, saving energy and making ventilation system for pleasant indoor environment are necessary when it is faced shortage of energy over the world. In our country's case, it is already imposed that required quantity of air ventilation in buildings is 0.7 times per hour on "The regulation on building engineering system". As on the rise of the interests about Indoor air environment, Heat and Carbon dioxide emissions from User's metabolism, activity, furniture, and construction materials etc. could be the causes of Indoor air pollution. If these materials stays in Indoor air for so long, it could directly influence the user's health condition with a disease. As of building's sterilization improved that raised more mechanical ventilation. It also leads much energy waste in a period of high price of fossil fuel. Therefore, the way that saves energy and effective control of indoor ventilation is urgently needed. So, this study places the purpose on validating volume of indoor ventilation and user's comfortable degree by comparison CO2 emission rate through changing floor temperature.

하천 친수공간 복합모니터링을 통한 친수활동 종합지수 개발 연구 (A study on the development of a comprehensive waterfront activity index through complex monitoring in waterfront)

  • 정우석;권시윤;이수정;권재현
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2022년도 학술발표회
    • /
    • pp.490-490
    • /
    • 2022
  • 국내 대하천 및 중·소규모 하천의 홍수터 공간을 활용하여 체육시설 및 공원 등과 같은 친수 시설물을 조성하여 친수공간으로 활용하고 있으며, 시민들의 친수활동 빈도는 증가추세에 있다. 특히 하천 내에서 수상 레크레이션 활동 등과 같은 다양한 친수활동이 증가하고 있으며, 하천친수에 관한 정보 수요가 급증하고 있으나 체계적인 공급은 미흡한 수준이다. 따라서 본 연구에서는 친수공간 조성 및 유지관리에 대한 측면과 친수공간에서의 쾌적한 친수활동을 위한 정보제공 목적으로 하천 친수공간에서의 복합모니터링을 이용한 친수활동 종합지수를 산정 방법을 개발하고자 하였다. 센서 기반의 시계열 데이터 구축을 위해 하천 수질, 수리인자의 복합모니터링을 진행하였다. 수리인자(수위, 유속, 수면폭 등)와 수질인자(탁도, Chl-a, pH 등), 기상학적 인자(자외선 지수, 미세먼지 등) 등급에 따른 허용기준을 설정하여 각 등급 별로 수리인자의 값을 0~1 사이 값인 소속도로 변환하여 소속도의 합성 및 친수활동 등급을 결정하였다. 최종적으로 수리, 수질, 기상 인자별 소속도 함수 산정을 통한 퍼지합성 이론 기반의 친수활동 종합지수를 산정하였다. 그리고 친수활동 종합지수를 예보하기 위한 모델 적용을 위한 방향성을 정립하였다.

  • PDF

친수공간 이용효율성 개선을 위한 중요도·만족도 분석 - 국내·외 드래곤 보트 페스티벌을 위한 친수공간 사례로 - (An Importance and Satisfaction Analysis for Improvement Efficiency Use of Waterfront - A Focus on the Waterfront Analysis for Domestic and Foreign Dragon Boat Festival -)

  • 안병철
    • 한국조경학회지
    • /
    • 제44권4호
    • /
    • pp.86-99
    • /
    • 2016
  • 본 연구에서는 친수공간을 적극적으로 활용하는 수상레포츠인 드래곤 보트 페스티벌을 통해 친수공간의 외적 환경과 내적 공간구조의 분석하고, 이용효율성을 증진시키는 방안을 고찰해 보고자 하였다. 홍콩, 부산, 인천, 대전 등 국내외 4곳의 대상지를 통해 친수공간의 이용효율성에 영향을 미치는 요소에 대한 이용자들의 중요도와 만족도를 분석하고, 이에 따른 기초데이터를 제공하여 친수공간의 문화컨텐츠 활성화에 도움이 되고자 하였으며, 그 결과는 다음과 같다. 첫째, 12항목에 대한 중요도 분석에서 친수공간 주변의 현대적 관광자원이 가장 높게 나타났으며, 수변경관, 수변광장 및 오픈스페이스, 편의시설, 교통접근성, 수변녹지, 전망공간, 역사적 관광자원, 보행접근성, 수면의 폭, 수질, 수심, 파랑 등의 수면조건, 계류시설 순으로 분석되었다. 둘째, 수변경관성은 대상지의 공간 구조적 문제라기보다는 도시 규모에 따른 외적 환경 요인에 의한 것으로 해석되며, 친수공간 입지선정에 영향을 미칠 수 있는 중요한 요인으로 해석된다. 수변 녹지경관의 분석에서 국내 대상지의 만족도가 높은 것은 최근 천변공원 등이 친수적 행위를 고려하여 조성된 원인에 있다고 볼 수 있다. 전망공간은 수변 쾌적성 체험과 드래곤보트를 비롯한 수상레포츠의 역동성을 입체감 있게 볼 수 있는 주요 인프라로서, 이용효율성을 위해 개선되어야 할 부분이라고 판단된다. 셋째, 관광자원적 요소는 친수공간 이용효율성에 영향을 미치는 중요도가 높은 인자로서, 역사적 자원보다는 현대적 관광자원에 더욱 민감히 반응하는 것으로 나타났는데, 이는 젊은 계층들의 쇼핑, 레저 등을 위한 관광인프라가 영향을 미친다고 분석되며, 홍콩과 부산은 주변 관광자원 인프라가 인접해 있는 친수공간 이용에 유리하게 작용한다는 것을 보여준다고 할 수 있다. 넷째, 교통 접근성 분석에서, 홍콩과 부산 두 곳 모두 지하철에 의한 교통 접근성이 우수한 지역의 영향으로 높게 평가되었으며, 대전은 교통 인프라에 비해 상대적으로 낮은 장소적 인지도의 영향 탓으로 만족도가 낮게 분석되었다. 홍콩의 보행접근성은 친수공간이 도심으로 연결되어 있고, 부산은 주거단지와 쇼핑센터 등의 이용객들이 도보로 접근할 수 있는 위치에 의한 결과로 분석된다. 마지막으로, 수면의 폭의 중요도 만족도 분석에서, 인천을 제외하고는 3곳 모두 수면의 폭이 200m 이상이며, 일정수준 이상의 수면 폭이 수상레포츠를 즐길 수 있는 집중력을 저해하는 결과로서 해석될 수 있다. 수질, 수심, 파랑 등의 수면 조건의 분석에서, 부산은 설문조사시 수질에 대한 문제가 제기되었으며, 대전 갑천의 경우는 대회 참여자들에 의해 적정수심에 대한 문제점이 제기되었다.

도시 건조환경 유형에 따른 서울시 주간 지표면 온도 변동성 분석: ECOSTRESS 데이터의 활용 (Examining Diurnal Thermal Variations by Urban Built Environment Type with ECOSTRESS Land Surface Temperature Data: Evidence from Seoul, Korea)

  • 전규원;박유진
    • 지역연구
    • /
    • 제40권2호
    • /
    • pp.107-130
    • /
    • 2024
  • 도시의 지표면 기온 변화는 도시민의 열 쾌적성, 에너지 소비, 나아가 건강에 영향을 미치는 주요한 환경요인이다. 많은 연구가 도시 지표면 기온과 도시 건조환경(built-environment) 형태 간의 관계를 탐색해 왔으나 대부분 극궤도위성 자료를 사용해 정오 시간대 기온만을 분석하였다. 본 연구는 다양한 시간대 지표면 기온을 관측하는 ECOSTRESS 위성 자료를 활용하여 서울시 여름철 지표면 기온의 주간 변동을 탐색하였으며 기온 변동이 건조환경 유형별로 차별적으로 나타나는지 분석하였다. ECOSTRESS는 2018년 발사된 NASA 위성으로 점진 변화 궤도를 운항하며 다양한 시간대 지표면 온도를 70m 고해상도로 관찰한다. 본 연구는 2019~2022년 이른 오전(6:25AM)과 늦은 오후(5:26PM)에 걸친 자료를 수집하여 서울시 지표면 온도의 시계열 자료를 구축하였다. 환경 특성을 반영하는 녹지, 수면, 건축 형태(건폐율, 용적률, 높이) 데이터를 기반으로 계층적 군집분석을 실시해 8가지 건조환경 유형을 도출하였으며, 유형별 온도변동 특성을 비교하였다. 각 유형은 저층고밀거주지(low-rise compact), 저밀아파트단지(low-BCR Apt.), 강변 중고층 주거단지(Riverside Mid-rise Apt.), 중고층 용도혼합지역(mid-to-high-rise mixed use), 고층고밀지역(high-rise compact), 초고층빌딩(skyscrapers), 산림, 수면(하천)을 나타내었다. 분석 결과, 지표 기온의 공간적 격차는 새벽 이후 증가하여 정오(12:04)에 극대화된 뒤 다시 감소하였으며, 기온 변화가 급격한 지역과 안정적인 지역이 구분되었다. 저층 고밀 거주지와 고층 고밀지역의 경우 기온이 빠르고 높게 증가하여 기온변동성이 높았고, 저밀 아파트단지는 기온이 온화하고 완만하게 증가하며 기온 변동성이 낮았다. 건조환경 유형 간 평균기온의 서열은 시간별로 변화하지 않고 유지되었다. 이러한 결과는 폭염과 일교차 증가에 적응할 수 있는 도시형태에 시사점을 제공한다.

IR-UWB 센서 기반의 에어컨 서비스 알고리즘 (Algorithm for Air Conditioning Service Based on IR-UWB Sensor)

  • 김종민;강태형;류갑상
    • 사물인터넷융복합논문지
    • /
    • 제7권4호
    • /
    • pp.1-7
    • /
    • 2021
  • 현재 스마트 가전의 새로운 시장수요를 만족하기 위해 IoT 기술을 이용한 제품의 기술 차별화(센서, AI 등)가 많은 호응을 얻고 있다. 그러나 에어컨 제품은 융합기술의 초기 단계에 있다. 따라서 에어컨 제품은 IoT를 넘어 정보 생산, 수집, 처리, 저장 및 서비스 개발의 ICT 기술이 필요한 분야이다. 우리가 제안하는 기술은 IR-UWB를 이용한 비접촉방식의 생체신호를 수집 및 저장한다. 생체신호에 따라 에어컨의 방향을 제어하고 사용자의 수면을 모니터링하여 최적의 숙면 환경을 제공한다. 그리고 불쾌지수 환경에 따라 에어컨의 최적조건과 감성조명의 변화로 쾌적함과 안락함을 제공할 수 있는 서비스 알고리즘을 제안한다. 본 연구를 통하여 생체신호, 불쾌지수 및 감성조명의 ICT 기술을 에어컨 서비스를 사용자들이 이용할 수 있도록 알고리즘을 연구하였다.

스퍼드제어시스템을 이용한 항로준설작업의 평가 (Evaluation of Waterway Dredging Work using Spud Control System)

  • 이중우;정대득;조증언;오동훈;금동호
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.263-271
    • /
    • 2005
  • 해상 준설선을 이용한 항로의 준설시공 과정에서 중요한 점은 작업구역의 공간적 축소로 여유통항수역의 제공과 수면하의 위험물 배제로 안정항행을 제공하는 것이 기본이다. 이를 위해서는 준설선의 이동과 고정을 위한 보조장치의 적극적인 활용과 함께 부대 장비의 실시간 위치 확인, 실시간 준설수심 확인 및 작업정보 등을 통합적인 정보로 제공하여 준설 작업의 자동화를 꾀해야 한다. 그런데, 본 연구에서 스퍼드 제어시스템을 비치한 준설선은 준설 시공시 준설구역 내 준설점 위치로 이동을 스퍼드로 하고 스퍼드는 자동제어 기술을 적용하여 준설선이 능동적 이동에 의한 준설시공을 행하여 최소의 작업공간을 점유하게 되므로 항행하는 타 선박의 안전한 통과를 허용하면서 준설공사를 중단 없이 시공할수 있다. 또한, 스퍼드 활용 항로준설시스템은 스퍼드의 거동쾌적은 물론 전자해도와 함께 작업심도 자료를 동시에 제공하므로 신속한 작업성과까지도 제시할 수 있다는 점에서 기존의 관리시스템과는 비교가 된다. 시스템 평가를 위한 부상항에서의 시험시공결과 일일 작업 시 기존의 앵카시스템을 이용한 작업시간의 2배정도를 실제 투입할 수 있었으며, 준설시공 요건별 비교에서도 준비시간을 38% 절감할 수 있었으며, 준비작업에 필요한 작업인력을 1인 줄일 수 있는 것으로 나타났다.

  • PDF