• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1135-1144
• /
• 2023

In this paper, bending strength and permeability tests were conducted on concrete permeable blocks manufactured by recycling industrial by-products of oyster shell and blast furnace slag to measure and compare bending strength and permeability coefficient, and present experimental research results. To this end, a total of 54 specimens with a size of 200x200x60mm for surface layer and base layer were manufactured, and bending strength and permeability test were carried ourt accoridng to KS F 4419. Eighteen types of mixing designs were implemented by varying the mixing and replacement rates of oyster shells and blast furnace slag. As a result of the experiment, the higher the mixing ratio of oyster shell, the lower the bending strength and the permeability coefficient. Thereafter, a total of three permeable blocks with dimensions of 200x200x60mm were manufactured and subjected to bending strength and permeability tests according to KS F 4419. As a result of the test, the bending strength satisfies the standard of KS F 4419, and the permeability coefficient is 12 times higher than the standard of KS F 4419. It seems that the proper mixing of oyster shells and blast furnace slag increases the amount of air, and further research on durability and economic feasibility of materials used to manufacture permeable blocks is required.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.345-345
• /
• 2017

급격한 도시화 현상으로 많은 인구가 밀집되고 토지를 집약적으로 이용을 하며 시멘트 콘크리트, 블록 등 도로포장으로 인해 불투수층이 증가하여, 폭우와 홍수로 인한 인명과 재산 및 교통체증 등과 같은 다양한 피해를 야기할 수 있다. 침수피해를 발생시키는 인자들은 지표면의 침수심, 침수면적 및 지속시간 등이 있으며, 이러한 인자들을 이용하여 침수에 관한 다양한 연구들이 이루어지고 있다. 본 연구에서 연구할 지역은 도림천 지역 대림 1동, 대림 2동, 대림 3동, 신대방동의 일부분 지역을 대상으로, 침수가 발생한 2010년 강우를 활용하여 도림천 지역의 도시침수를 분석을 하였다. 침수가 일어난 원인으로는 관의 허용용량 초과로 인해 침수가 되었던 것으로 보이고 각 지선관거가 간선관거로 합류하는 과정에서 과부하로 인해 주요 간선관거에서 월류가 발생한것으로 판단된다. 이와 같이 내수배제시설 용량의 초과로 인한 침수가 발생하였을 경우 막대한 피해가 발생하게 되고 이를 저감하기 위해서는 침수심 및 침수면적 등 피해정도를 미리 예측하여 관리 할 수 있는 방안에 대한 연구가 필요하다. 본 연구는 도림천의 우수관망을 이용하여 침수해석모형인 SWMM을 활용하여 문제점들을 파악하였으며, 침수방어능력을 향상 시킬 수 있는 방안을 연구하고자 한다.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.2
• /
• pp.35-42
• /
• 2013

Recently, construction of reinforced earth structure using geosynthetics has been increased because it has advantages such as construction efficient, cost effectiveness and appearance aspect against existing gravity or cantilever retaining wall. However due to the climate change in Korea excessive inflow of ground water and surface water from heavy rainfall could affect the stability of reinforced retaining wall seriously. So the discharge capacity of drains should be evaluated by using experimental method in the design of reinforced earth wall. In this study, instead of concrete block used in most of the retaining wall, eco-friendly porous soilbag was used. This paper describes the test method and result of the laboratory testing for determination of discharge capacity utilizing PBDs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.91-98
• /
• 2011

Recently, the usage of elastic paving using EPDM Chip instead of pedestrian sidewalk blocks or permeable concrete used mostly for pedestrian walk, trails and in parks has been increassed as it can absorb impact during walking and produce wide range of colors and designs. However, the properties of EPDM Chip including elasticity and durability are decreased when exposed to ultraviolet ray and scenic paving functions through various colors are lowered due to the yellowing phenomenon. In this study, ultraviolet ray accelerated weathering test has been conducted to analyze the color changes in EPDM Chip and polyurethane resin, which are the main ingredients of elastic paving, when exposed to ultraviolet ray. The color differences are quantitatively analyzed through the color value coordination of the colored space by using the color difference scheme. The experimental results show that the color changes in BL polyurethane resin which is used most frequently at present was larger than that of EPDM Chip. Moreover, the total color difference, ${\Delta}E$, of BC polyurethane resin are 3.162 on the $14^{th}$ day of commencement of acceleration, which is 6 times greater color change resistance against ultraviolet ray than that of BL polyurethane resin with total color difference of 20.639. Therefore, the usage of BC polyurethane resin, which is manufactured to have chain-type molecular structure by using the isocyanate as the HMDI at the time of producing polymer, as binder in elastic paving with EPDM Chip is found to be a highly efficient method of restraining the color changes due to the ultraviolet ray.