• Title/Summary/Keyword: 콘크리트 측압

Search Result 28, Processing Time 0.025 seconds

Experimental Study on Lateral Pressure Characteristics of a Formwork for High-Flowable and High-Strength Concrete (고유동 고강도 콘크리트용 거푸집의 측압 특성에 관한 실험적 연구)

  • Ko, Young-Kon;Kim, Cheol-Hwan;Hwang, Jae-Woong;Yi, Seong-Tae
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.19 no.3
    • /
    • pp.130-138
    • /
    • 2015
  • In this study, to examine the application of cast-in-place of high-flowable and high-strength concrete, an experimental study on the lateral pressure of a formwork was preformed. The experiment specimens, which have different casting height and casting speed were prepared. The lateral pressure and the change of temperature from test specimens were obtained. The maximum lateral pressure was shown to lateral pressure of fresh concrete. Immediately after placing, the lateral pressure starts to decrease and, after 12 hours, it showed a stabilization. The decreased tend of the lateral pressure was similar with normal-strength concrete, which appears stabilization after 3~4 hours from casting completion. The more casting speed is fast, the more maximum lateral pressure is high, but pressure reduction with the lapse of time was nearly similar. In addition, it was found that there was no direct relation between the hydration heat and the lateral pressure reduction.

Development of a Prediction Model for Formwork Pressure Exerted by Self-Compacting Concrete (자기충전 콘크리트의 거푸집 측압 예측 모델 개발)

  • Kwon, Seung-Hee
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.453-456
    • /
    • 2008
  • This study is underway to develop a prediction model for formwork pressure exerted by self-compacting concrete(SCC). Three major mechanisms related to formwork evolution over time were found, and mathematical modelling of each mechanism was made. A calculation method for real formwork pressure by using the mathematical formulae was also established. To verify predictive capability of the prediction model, a parametric study on parameters used in the model was performed. It was confirmed that the proposed model include the essential parameters that can simulate the real formwork pressure evolution over time.

  • PDF

Safety Assessment of Double Deck Plate Wall Formwork against Lateral Pressure of Fresh Concrete (콘크리트 측압에 대한 더블 데크플레이트 벽체 거푸집의 안전성 평가)

  • Lee, Hye-Ji;Mun, Ju-Hyun;Yang, Keun-Hyeok
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2023.11a
    • /
    • pp.225-226
    • /
    • 2023
  • This study examined the lateral deformation of double deck plate wall formworks against the lateral pressure of fresh concrete and then compared with the construction specification.

  • PDF

Development of a system using sensors and IoT technology for measuring side pressure (측압측정을 위한 센서 및 IoT기술을 활용한 시스템 개발)

  • Kim, Hong-youn;Park, Tae-Jun;Lim, Hye-kyung
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2022.11a
    • /
    • pp.344-346
    • /
    • 2022
  • 본 논문에서 거푸집의 가장취약 부분인 접합부위에 로드센서를 부착하여 실시간 콘크리트 측압을 측정 할 수 있으며, 관리자는 모니터링을 통하여 확인 할 수 있도록 하며 LORA의 저전력 장거리 통신망을 사용하는 디바이스를 개발하여 로드센서에 측정한 값을 데이터변경, 웹 기반의 클라우드 서비스로 발송하여 PC 및 Mobile로 확인 할 수 있는 시스템을 구축하였다. 여러가지 센서로부터 데이터를 수신하여 모바일로 송신해 주는 무선송수신기의 개발을 원하고 있으며, 하중센서, 경사도센서, 풍향센서 등 다중 데이터값을 수신할 수 있어야 한다. 이렇게 구성된 센서와 데이터의 수신을 통해서 콘크리트 타설시 발생하는 측압을 측정하고 공사기간 동안 별도의 전원 공급 없이 작동이 유지될 수 있는 시스템을 구축하였다. 수요자가 Application과 호환이 이루어져야 하며 또한 MEMS센서를 이용하여 상태를 모니터링 하고 임계값을 지정하여 이상 신호 발생시 위험상황에 대해서 인공지능기법을 이용하여 관리자에게 알림을 주어 효과적으로 사용할 수 있는 시스템을 개발하였다.

Relation of Concrete Setting Characteristic and Lateral Pressure in Mass Concrete Wall (매스콘크리트 벽체에서 콘크리트 응결 특성과 측압과의 관계)

  • 박찬규;유재현;백승준;정재홍;진용만
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2001.11a
    • /
    • pp.935-938
    • /
    • 2001
  • This paper reports the relation of concrete setting characteristic and lateral pressure in mass concrete wall such as side wall of LNG underground storage tank. In order to estimate the lateral pressure, initial setting time of low heat cement concrete with type of mineral admixture was measured for three concrete mixtures(W/P=41.6%) containing limestone powder, fly ash, and slag powder. As a result, the lateral pressure of the concrete containing limestone powder was the smallest than those of other concretes as well as the initial setting time.

  • PDF

Numerical Analysis of Tunnel Lining under Loosening Load (수치해석을 통한 이완하중에 따른 터널 라이닝의 거동 분석)

  • Park, Jung-Jin;Kim, Yong-Min;Hwang, Taik-Jean;Jeong, Sang-Seom
    • Journal of the Korean Geotechnical Society
    • /
    • v.27 no.7
    • /
    • pp.35-45
    • /
    • 2011
  • Cost effective design and construction are necessary to establish the design concept of tunnel lining. Loosening load acting on the concrete lining is compared with Terzaghi tunnel theory and numerical analysis. It is analyzed under the condition of weathered rock and soil with varying in-situ stress ratio ($K_0$). Based on the result, loosening load calculated by Tcrzaghi tunnel theory is much greater than numerical analysis results. And the load calculated in weathered soil is lager than weathered rock condition. As in-situ stress ratio increases, the stress acting on the tunnel lining decreases in Terzaghi theory rapidly, whereas there is little effect in numerical analysis.

Influence of the Lateral Pressure on the Interface Shear Transfer of Concrete (콘크리트의 경계면 전단 전달에 대한 측압의 영향)

  • 이재혁;김상식;최영규
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1995.10a
    • /
    • pp.278-283
    • /
    • 1995
  • In this study, the influence of the lateral pressure on the interface shear transfer of concrete has been investigated experimentally. A total of 21 specimens has been tested at the laboratory. The lateral pressure intensities in the tests have been taken as 0, 7, 14, 28, and 35kg/$\textrm{cm}^2$ for the specimens, the compressive strengths of which are either 180, 400 or 550kg/$\textrm{cm}^2$. The linear regression analysis based on the test results has shown relatively good agreements with the values given in the shear friction theory.

  • PDF