• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.235-235
• /
• 2013

공정의 단순함과 낮은 전력을 사용하여 구동이 가능한 장점을 가진 무기물 나노입자를 포함한 무기물/유기물 나노복합체를 사용한 비휘발성 메모리의 전기적 성질에 대한 연구가 많이 진행되고 있다. 다양한 나노입자를 포함한 고분자 박막에 대한 연구는 많이 진행되었지만, InP/CdSe 코어쉘 나노입자가 고분자 박막에 분산되어 있는 나노복합체를 사용하여 제작한 비휘발성 메모리 소자의 전기적 성질과 소자의 안전성에 대한 연구는 미흡하다. 본 연구에서는 고분자 박막 안에 분산되어 있는 InP/CdSe 코어쉘 나노입자를 사용한 메모리 소자를 제작하여 전기적 성질과 소자의 안정성에 대한 관찰을 하였다. 화학적으로 세척된 indium-tin-oxide (ITO)가 코팅된 유리 기판 위에 InP/CdSe 코어쉘 나노입자와 절연성 고분자가 혼합된 용액을 스핀코팅 방법으로 도포하여 박막을 형성하여 활성층으로 사용하였다. 형성된 박막 위에 Al 상부 전극을 고진공에서 열 증착 방식을 이용하여 ITO/InP/CdSe 코어쉘 나노입자가 분산된 절연성 고분자층/Al 구조를 갖는 메모리 소자를 제작하였다. 제작된 소자의 전류-전압 특성을 측정한 결과 동일 전압에서 전도도가 좋은 상태 (low resistance states; LRS)와 좋지 않은 상태 (high resistance states; HRS)인 두개의 상태가 존재하는 걸 확인하였다. LRS 또는 HRS 변화를 일으키는 일정 전압을 가하기 전까지는 각각의 LRS 또는 HRS를 계속 유지하여 비휘발성 메모리 소자로서의 활용 가능성을 보여주었다. LRS 또는 HRS의 안정성을 확인하기 위해 LRS 또는 HRS의 스트레스 실험으로 관측하였다. 제작된 메모리 소자의 실험 결과를 바탕으로 전하수송 메커니즘을 설명하였다.

• Clean Technology
• /
• v.30 no.1
• /
• pp.55-61
• /
• 2024

Efforts are actively underway to address the issues related to the high cost of Pt-based catalysts for oxygen reduction reactions by designing high-performance Pt-based alloys through the control of their nanostructures. In this study, a method was proposed to control the nanostructure of Pt-based alloys, either hollow or core-shell, by adjusting the pH of the solution during the galvanic replacement reaction between the carbon-supported nickel-nickel nitride composite and the Pt ions. The physical characteristics, including the state, quantity, and morphology of the metal particles under different preparation conditions, were evaluated through X-ray diffraction, transmission electron microscopy, and inductively coupled plasma. When the prepared catalysts were employed for the oxygen reduction reaction, they exhibited an improvement in area specific-activity compared to a commercial Pt/C, with a 1.7 and 1.9-fold enhancement for the hollow and core-shell structured catalysts, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.93-93
• /
• 2011

Nanostructures consisting of $TiO_2$ particles as a core and carbon as a shell ($TiO_2$@C) were prepared by heat treatment of $TiO_2$ nanoparticles at high temperature in a methane atmosphere. X-ray diffraction and transmission electron microscopy showed that a carbon shell layer was formed well. These structures were used as supports for platinum nanoparticles and the hybrid particles exhibit improved catalytic activity and stability toward ORR compared to Pt on a carbon black (Vulcan XC-72R). It is likely that enhanced catalytic properties of the Pt on $TiO_2$@C could be due to the stability of the core-shell support in comparison with carbon black support.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.78-87
• /
• 2015

With aiming to prepare microcapsules having a particle size of $30-50{\mu}m$, thermally expandable capsules with relatively uniform particle sizes consisting of a n-octane/poly(acrylonitrile-co-methyl methacrylate) core/shell structure were synthesized using SPG membrane emulsification and suspension polymerization. Four steric stabilizers and five crosslinking agents were employed. When poly(vinyl alcohol) as a stabilizer was used, the prepared capsules showed a smooth and regular morphology and the liquid hydrocarbon (n-octane) was well encapsulated in the core. When 1,4-butnaediol methacrylate (BDDMA) was used as a crosslinker, the uniform capsules with the average diameter of $36.8{\mu}m$ were synthesized. The capsules prepared with 0.05 mol% BDDMA showed the best encapsulation efficiency.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.35-40
• /
• 2018

Simple and useful synthetic process to control the morphology of block copolymers (BCPs) is required for implementation in various device applications. However, the conventional method to use colloidal templates is not enough to realize the production of pure and massive core-shell nanoparticles due to the cost-intensive complex process. Here, we introduce a novel and facile synthesis method to realize the formation of core-shell $SiO_x$ nanoparticle power by employing an immersion annealing of a sphere-forming poly(styrene-b-dimethylsiloxane) (PS-b-PDMS) BCP. We successfully obtained a PS-encapsulated $SiO_x$ nanoparticle with a diameter of ~20 nm. In addition, we analyzed how the mixing ratio of heptane/ethanol affects the BCP morphology of self-assembled PS-b-PDMS nanoparticles, showing a worm-like structure under the optimum immersion conditions. This useful approach is expected to be extendable to other solvent-based BCP synthesis, providing a new guideline for unique BCP production.

• Clean Technology
• /
• v.28 no.2
• /
• pp.154-162
• /
• 2022

Microstructured Al@Al₂O₃ and Al@Ni-Al LDH (LDH = layered double hydroxide) core-shell metal-ceramic composites are prepared by hydrothermal reactions of aluminum (Al) metal substrates. Controlled hydrothermal reactions of Al metal substrates induce the hydrothermal dissolution of Al ions at the Al-substrate/solution interface and reconstruction as porous metal-hydroxides on the Al substrate, thereby constructing unique metal-ceramic core-shell composite structures. The morphology, composition, and crystal structure of the core-shell composites are affected largely by the ions in the hydrothermal solution; therefore, the critical physicochemical and surface properties of these unique metal-ceramic core-shell microstructures can be modulated effectively by varying the solution composition. A Ni/Al@Al₂O₃ catalyst with highly dispersed catalytic Ni nanoparticles on an Al@Al₂O₃ core-shell substrate was prepared by a controlled reduction of an Al@Ni-Al LDH core-shell prepared by hydrothermal reactions of Al in nickel nitrate solution. The reduction of Al@Ni-Al LDH leads to the exolution of Ni ions from the LDH shell, thereby constructing the Ni nanoparticles dispersed on the Al@Al₂O₃. The catalytic properties of the Ni/Al@Al₂O₃ catalyst were investigated for CO₂ methanation reactions. The Ni/Al@Al₂O₃ catalyst exhibited 2 times greater CO₂ conversion than a Ni/Al₂O₃ catalyst prepared by conventional incipient wetness impregnation and showed high structural stability. These results demonstrate the high effectiveness of the design and synthesis methods for the metal-ceramic composite catalysts derived by hydrothermal reactions of Al metal substrates.

• Journal of the Korean Magnetics Society
• /
• v.27 no.4
• /
• pp.135-139
• /
• 2017

The magneto-impedance effect (MI effect) has been investigated in metal core/soft magnetic shell composite wires fabricated by electrodeposition of $Ni_{80}Fe_{20}$ on Cu wire (diameter $190{\mu}m$). The diagonal impedances $Z_{zz}$ and $Z_{{\theta}{\theta}}$ in cylindrical coordinate showed strong MI effect for the magnetic field applied along z-axis, while the off-diagonal impedance $Z_{{\theta}z}$ showed very weak MI effect. We have tried to develop the Cu $core/Ni_{80}Fe_{20}$ shell composite wire having strong MI effect in off-diagonal impedance by electrodeposion under torsional strain. The core/shell composite wire electrodeposited under torsional angles above $270^{\circ}$ showed significantly enhanced MI effect in the off-diagonal impedance. The maximum MI effect was observed in the composite wire electrodeposited under torsional angle of $360^{\circ}$. The developed method to enhance off-diagonal MI effect is expected to increase the applicability of the core/shell composite wire to magnetic sensor material.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2009

In the past decade, we have observed rapid advances in the development of biochips in many fields including medical and environmental monitoring. Biochip experiments involve immobilizing a ligand on a solid substrate surface, and monitoring its interaction with an analyte in a sample solution. Metal nanoparticles can display extinction bands on their surfaces. These charge density oscillations are simply known as the localized surface plasmon resonance (LSPR). The high sensitivity of LSPR has been utilized to design biochips for the label-free detection of biomolecular interactions with various ligands. LSPR-based optical biochips and biosensors are easy to fabricate, and the apparatus cost for the evaluation of optical characteristics is lower than that for the conventional surface plasmon resonance apparatus. Furthermore, the operation procedure has become more convenient as it does not require labeling procedure. In this paper, we review the recent advances in LSPR research and also describe the LSPR-based optical biosensor constructed with a core-shell dielectric nanoparticle biochip for its application to label-free biomolecular detections such as antigen-antibody interaction.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.382-388
• /
• 2010

This paper describes the standardized finite element model for carbody structures of railway vehicle made of sandwich composites. Recently, sandwich composites were widely used to railway vehicle due to the improvement of energy efficiency, high specific stiffness and strength, weight reduction and space saving in korea. Therefore, structural integrity should be verified using finite element analysis prior to the manufacture of composite railway vehicle. The standardized finite element model for composite carbody structures was introduced through comparing the results of real structural test under vertical, compressive, twisting load and natural frequency test of various railway vehicles in this study. The results show that the quadratic shell element is suitable to model the reinforced metal frame used to improve the flexural stiffness of sandwich panel compared to beam element, and layered shell and solid element are recommended to model the skin and honeycomb core of sandwich panel compared to sandwich shell element. Also, the proposed standard finite element model has the merit of being applied to crashworthiness problem without modifications of finite element model.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.485-489
• /
• 2009

The temperature dependence of the structure of micelles formed by a deuterated polystyrene-poly(ethylene oxide) diblock copolymer (dPS-PEO) in heavy water were investigated with small-angle neutron scattering (SANS). SANS data were analyzed using the hard-sphere structure factor in combination with the form factor of a core-shell model. The micelle aggregation number and corona radius were obtained from the fits to the SANS data. The micelle aggregation numbers varied with temperature from 229 at $25^{\circ}C$ to 240 at $45^{\circ}C$, with a corresponding increase in the core radius. However, the shell thickness of micelles decreased with increasing temperature from 6.2 to 5.8 nm. These structural changes of micelles might be ascribed to the decrease in the hydration volume per hydrophilic group in the corona because of the increase in hydrophobicity of the PEO block with increasing temperature.