• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.411-418
• /
• 2004

Tip clearance of centrifugal compressor affects the performance. Larger tip clearance results in lower efficiency. What really affects the performance is the running tip clearance, not the cold tip clearance. When the compressor is operating, blade strain and the pressure difference between impeller backplate and hub affects the running tip clearance. This paper describes measured running tip clearance and its effects on the performance of centrifugal compressor. Cold tip clearance before operation was 0.4 mm and running tip clearance varied from 0.86 mm to 0.25 mm with impeller exit pressure. As the pressure at impeller exit increases, the routing tip clearance tends to decreases. The target running tip clearance for compressor at $100\%$ speed was 0.3 mm and it turned out to be exactly 0.30 mm from experiment.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.119-128
• /
• 2013

This paper proposes and implements an core transform architecture, which is one of the major processes in HEVC video compression standard. The proposed core transform architecture is implemented with only adders and shifters instead of area-consuming multipliers. Shifters in the proposed core transform architecture are implemented in wires and multiplexers, which significantly reduces chip area. Also, it can process from $4{\times}4$ to $16{\times}16$ blocks with common hardware by reusing processing elements. Designed core transform architecture in 0.13um technology can process a $16{\times}16$ block with 2-D transform in 130 cycles, and its gate count is 101,015 gates.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.881-882
• /
• 2006

선형전동기(linear motor)는 일반 회전형 모터에 비해 직선 구동력을 직접 발생시키는 특유의 장점이 있으므로 직선 구동력이 필요한 시스템에서 회전형에 비해 절대적으로 우세하다. 선형전동기의 성능인 추력을 스테이터, 코어, 영구자석 등의 구성요소의 형상과 치수, 코어와 영구자석의 극간격, 공극, 코일의 권수에 따라서 결정된다. 본 논문에서 제안한 2kW급 단상 구동형 횡자속 선형전동기는 압축기 제작에 필요한 직경 50mm, 구동 스트로크 18mm로 설계하였다. 또한 pole pitch가 20mm로 설계하였으며 요구되는 평균추력은 940N이다. 제작된 압축기의 특징은 고정자와 이동자가 맞닿는 flux path를 넓히기 위해서 최대한 경사진 각도의 형상으로 제작하였으며 경사의 각도가 커지면 커질수록 압축기로 구동하는 이동자와 고정된 부위사이에서 발생하는 흡인력이 상쇄되는 구조이기 때문에 진동의 원인으로 가장 크게 작용한다는 디텐트력이 작다는 것이 특징이며, 진동특성 등에 유리한 것으로 판단된다.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.1 s.28
• /
• pp.7-15
• /
• 2005

Tip clearance of centrifugal compressor affects the performance. Larger tip clearance results in lower efficiency. What really affects the performance is the running tip clearance, not the cold tip clearance. When the compressor is operating, blade strain and the pressure difference between impeller backplate and hub affects the running tip clearance. This paper describes measured running tip clearance and its effects on the performance of centrifugal compressor. Cold tip clearance before operation was 0.4 mm and running tip clearance varied from 0.86 mm to 0.25 mm with impeller exit pressure. As the pressure at impeller exit increases, the running tip clearance tends to decreases. The target running tip clearance for Compressor at $100\%$ speed was 0.3 mm, and it turned out to be exactly 0.30 mm from experiment.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.788-791
• /
• 2001

An improved double-cylinder hammer-driven sampling device was designed to extract undisturbed soil cores. The improvements consist of 1) separation of hammer from the driving head, 2) a split inside cylinder, and 3) a plastic sample holder. Pushing the sampler deep into the soil before hammering would result in less compression of the sample. Core samples should be taken in soils of medium moisture content. The improved soil core sampler provides sufficiently accurate volumetric soil samples with original soil layers and soil cores of 40cm in length and 5cm in diameter.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.589-595
• /
• 2015

This study evaluated the in-site compressive strength development of high-strength concrete developed for the mass structures under cold weather condition. Two mock-up wall specimens with $2.0{\times}1.2{\times}1.0m$ in dimension were cured under an average temperature of $5^{\circ}C$. Core strengths measured at different locations of the mock-up walls were compared with the companion standard cylinder strengths. Test results revealed that the core strength of mock-up walls at an age of 3 days is higher by approximately 30% than the companion cylinder strength because of the high curing temperature effect generated from the heat of hydration of cementitious materials. Furthermore, comparisons with the prediction models based on maturity function confirmed that the effect of hydration heat on the curing temperature increase needs to be reflected to reasonably evaluate the on-site compressive strength development of concrete for mass elements.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.8
• /
• pp.885-893
• /
• 2006

A dynamic model of turbo air compressor having multi-helical gear pairs is developed by transfer matrix method. The model accounts for the shaft and bearing flexibilities, gyroscopic effects and the force couplings among the transverse, torsion, and axial motions due to gearing. The program which can be used to analyze and predict the vibrational characteristics by the mass unbalance of the rotors and gear transmission error of turbo compressor is developed with this system model We expect this developed program to contribute the reduction of the vibration/noise on turbo compressor in the field of both design and manufacturing and can be used as a basic sub-program for CAD/CAM of low-noised gear teeth also.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.187-187
• /
• 2010

최근 해상풍력 블레이드가 대형화됨에 따라 보다 가볍고 강한 재료가 요구되고 있다. 현재 주로 사용되고 있는 복합재는 발사우드나 PVC 폼 등을 코어소재로 하고, 유리섬유나 탄소섬유 등을 보강섬유로 사용하고 있다. 본 연구에서는 현재 사용되고 있는 복합재에 대한 특성을 알아보고, 최근 흡음, 충격 및 열에 강한 발포 알루미늄을 이용한 복합재를 해상풍력 블레이드 제조에 적용하여, 구조 강도 실험을 실시함으로써 기존 복합재와 구조 강도 및 비용 등을 비교 검토하여 우수한 복합재를 제시하고자 한다. 이를 위해 대형구조물인 블레이드를 제작하기 위해 적절한 크기의 발포 알루미늄을 상호 접합하기 위한 방법을 연구하고자 하며, 목포대학교에서 보유중인 만능재료시험기(100 Ton)를 활용하여 인장, 압축, 굽힘 실험을 실시하고, 스킨재 변화, 코어재의 밀도와 두께 변화를 고려하여 다양한 복합재의 강도를 비교하고자 한다. 또한, 기존에 사용되고 있는 복합재와 발포 알루미늄을 이용한 복합재의 재료비 및 가공비를 추정하고 경제적인 복합재를 제시하고자 한다.

• Journal of KIISE
• /
• v.42 no.7
• /
• pp.840-845
• /
• 2015

In recent years, Big Data has been a topic of great interest for the production and operation work of offshore plants as well as for enterprise resource planning. The ability to predict future equipment performance based on historical results can be useful to shuttling assets to more productive areas. Specifically, a centrifugal compressor is one of the major piece of equipment in offshore plants. This machinery is very dangerous because it can explode due to failure, so it is necessary to monitor its performance in real time. In this paper, we present stream data processing architecture that can be used to compute the performance of the centrifugal compressor. Our system consists of two major components: a virtual tag stream generator and a real-time data stream manager. In order to provide scalability for our system, we exploit a parallel programming approach to use multi-core CPUs to process the massive amount of stream data. In addition, we provide experimental evidence that demonstrates improvements in the stream data processing for the centrifugal compressor.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.11-19
• /
• 1999

Fractal image compression algorithm has been studied mostly not in the view of hardware but software. However, a general processor by software can't decode fractal compressed images in real-time. Therefore, it is necessary that we develop a fast dedicated hardware. However, design examples of dedicated hardware are very rare. In this paper, we designed a quadtree fractal-based compressed image decoder which can decode $256{\times}256$ gray-scale images in real-time and used two power-down methods. The first is a hardware-optimized simple post-processing, whose role is to remove block effect appeared after reconstruction, and which is easier to be implemented in hardware than non-2' exponents weighted average method used in conventional software implementation, lessens costs, and accelerates post-processing speed by about 69%. Therefore, we can expect that the method dissipates low power and low energy. The second is to design a power dissipation in the multiplier can be reduced by about 28% with respect to a general array multiplier which is known efficient for low power design in the size of 8 bits or smaller. Using the above two power-down methods, we designed decoder's core block in 3.3V, 1 poly 3 metal, $0.6{\mu}m$ CMOS technology.