• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.260-260
• /
• 2015

본 연구는 높은 인장력, 좋은 내마모성, 열전도성, 경도와 자성 등의 특성을 가진 니켈 코발트 합금 도금액 개발에 있어 첨가제를 첨가하여 피막 특성을 관찰하였다. Ni-Co 합금 도금액 개발을 위해 니켈 염으로 썰파민산 니켈 혹은 황산 니켈을 이용하여 황산코발트를 50g/L 혼합하여 $5A/dm^2$의 전류를 가할 경우 약 $40{\mu}m/hr$의 도금속도를 나타내었으며 코발트의 공석량은 50~55wt.% 였다. 도금액에 Leveler 및 wetter를 첨가하여 도금피막 특성을 관찰하였으며 이때 도금피막에 작용하는 내부응력을 관찰한 결과 썰파민산 니켈을 사용한 도금액의 내부응력이 낮음을 확인할 수 있었다.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.1
• /
• pp.15-25
• /
• 1996

자동차엔진의 피스톤-링에 응용할 목적으로 플라즈마 용사 기술로 피막한 몰리부덴늄 및 코발트 합금 피막 층의 마모성질을 비교 조사하였다. Ball-on-disc 형태의 마모기를 사용하여 상온 및 대기 중에서의 마모 및 마찰거동에 대하여 조사하였다. 용사 층의 미세경도 시험도 행하였으며, 용사층의 결정구조를 알기 위해 용사층을 x-선 회절 방법으로 분석하였다. 주사전자현미경을 사용하여 마모면의 표면 형상을 관찰하였다. 여러 용사조건으로 만든 용사층의 미세경도치와 마모거동과의 상관관계를 이해하려고 시도하였다. 주사전자현미경과 EDX를 사용하여 마모시 화학반응층과 마모기구를 규명하고자 하였다. 모리부덴늄 및 코발트 합금 분말을 각각 플라즈마 용사층의 단면을 관찰하여 마모기구을 비교하였다.

• Journal of the Korean Chemical Society
• /
• v.61 no.6
• /
• pp.320-327
• /
• 2017

In a borate buffer solution, the growth kinetics and the electronic properties of passive film on cobalt were investigated, using the potentiodynamic method, chronoamperometry, and single-frequency electrochemical impedance spectroscopy. It was found out that the unstable passive film ($Co(OH)_2$) and CoO of Co formed in the low electrode potential changes to $Co_3O_4$ and CoOOH while the electrode potential increases. And the composition of the passive films was varied against the applied potential and oxidation time. The oxide film formed during the passivation process of cobalt has showed the electronic properties of p-type semiconductor, which follow from the Mott-Schottky equation.

• 전기의세계
• /
• v.42 no.9
• /
• pp.20-27
• /
• 1993

1. 철근출막은 결정자기이방성의 영향이 작기 때문에, 자기특성이 막의 기하학적구조에 의해 거의 결정되고 그것에 의하여 자성막의 설계가 가능하다. 2. 코발트 근출막은 결정자기이방성이 자기특성에 영향은 크기때문에 코발트 결정의 자화용역축(C축)의 배향에 의하여 자기특성은 크게 변한다. 따라서 이 C축의 배향성을 변화시켜 석출입자의 형태를 바꾸지 않고 작은 포아직경에서도 항자력의 제어가 가능하였다. 3. 코발트-철합금신출막은 조성변화에 의하여 자기특성을 제어할 수 있다. 또 ㅈ포화자화, 항자력도 철을 석출한 자성막에 비해서 높은 값을 나타냄을 물론, 우수한 각형화(Mr/Ms)로 얻어지는 큰 자기에너지적으로 수직 자기기록방식의 고정밀의 로타리 엔코다에의 응용이 유망하다.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.25-31
• /
• 1994

The magnetic properties of aluminum anodized film in which Co-Fe alloy electrodeposited are investigated with regard to the alloy composition of magnetic films. The electrodeposited Co-Fe particles are confirmed to be single phase Co-Fe alloys by X-ray diffractions. At 34 at% Co, the sample with small pore diameter(particle diameter $150\;{\AA}$) has a large magnetic energy product($B_{max}$) of about 1.44 MGOe due to the large saturation magnetization, the high coercive force and good squareness of the M-H curve. However, for the samples with particle diameter larger than $450\;{\AA}$, the bottom of each particle forms abnormal particle claaed branch-shaped unlike the sample of the particle diameter $150\;{\AA}$. In this case, the magnetic anisotropy energy was about zero at the compositions of 45 and 75 at% Co. Moreover, at the compositions from 50 to 70 at% Co, the anisotropy became negative value. This means that an easy axis of magnetization of the film is in plane in plane in spite of the perpendicular shape anisotropy of the particle. It was found that the bottom extremity of the particle contains FeC from the X-ray diffraction. Thus the effect of the bottom extremity, that is, an unusal magnetic property was removed by electrodepositing Cu at the bottom extremity of the particle. Itis clear that the magnetic properties of the ilms are influenced by he branch-shaped bottom extremity filled with FeC.

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.921-927
• /
• 1995

The micro particle,s shapes of the magnetic films obtained by electrode position of Iron ions and Cobalt-Iron mixed ions in aluminum anodic oxidized films are dependent on the size of particle diameter. When the diameter of deposited particles is larger than $300\AA$, the film plane anisotropy caused by bottom extremity increases, and the crystalization orientation of FeC deposited unusually in the part of the bottom extremities affects on the coercive force Hc and the magnetic anisotropy energy Ku. It was confirmed that the shape anisotropy of particle affects on the both Hc and Ku because the FeC did not deposit in the Iron deposited samples entirely, but in the Cobalt-Iron alloy deposited samples, the effects by the very strong crystalization orientation of the FeC is larger than that of the shape anisotropy. From these results, the Cobalt-Iron alloyed films could switchover the film plane magnetic anisotropy to the perpendicular magnetic anisotropy energy by using the constrainting method of FeC deposition with Cu deposition instead of Cobalt-Iron alloy in the bottom extremities.

• Journal of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.391-399
• /
• 1974

Corrosion and passivation of metallic cobalt was studied by means of electrochemical experiments including potentiostatic and galvanostatic measurements and cyclic voltammograms. The mechanisms of active dissolution and passivation of cobalt at the metal/borate buffer solution interface are deduced from the Tafel slope, pH dependence of the Flade potential, and dissolution kinetic data. Hydroxyl group adsorbed on cobalt surface seems to participate in surface oxidation and formation of the passive layer. The growth kinetic data as measured by the current density suggests a mechanism in which the growth of the passive layer is determined by field-assisted transport of ions through the layer. Thickness of the passive layer was estimated by coulometry to be about 10${\AA}$ at the lowest passive potential and to grow gradually with anodic potential to about 20${\AA}$.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1143-1146
• /
• 1993

The magnetic properties of aluminium anodized film in which Co-Fe alloy electrodeposited are investigated with regard to the alloy composition of magnetic films. The electrodeposited Co-Fe particles are confirmed to be single phase Co-Fe alloys by X-ray diffractions. The coercive force as well as the magnetic anisotropy energy can be controlled by changing the composition of the alloy. Magneticfilms having high saturation magnetization and high coercive force were obtained.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.287-287
• /
• 2012

주석합금도금 피막은 약한 전류가 흐르는 전자제품, 휴대전화, 자동차 공업용, 장식용으로 사용되고 있다. 현재까지 공업적으로 사용되고 있는 주석합금도금의 합금원소로서 은, 코발트, 니켈 등의 높은 가격의 금속과 납과 같이 ELV 및 RoHS 유해환경물질규제지침에 따라 수출제한을 받는 6가 크롬, 카드뮴 등이 알려져 있다.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.67-75
• /
• 2005

For th aim of lightweight microwave absorbers, conductive and magnetic microspheres are fabricated by plating of Co films on hollow ceramic microspheres of low density. Metal plating was carried out in a two-step electroless plating process (pre-treatment of activation and plating). Uniform coating of the film with about $2{\~}3{\cal}um$ thickness was identified by SEM. High-frequency magnetic and microwave absorbing properties were determined in the rubber composites containing the Co-coated microspheres. Due to conductive and ferromagnetic behavior of the Co thin films, high dielectric constant and magnetic loss can be obtained in the microwave frequencies. Due to those electromagnetic properties, high absorption rate (25 dB) and thin matching thickness ($2.0{\~}2.5{\cal}mm$) are predicted in the composite layers containing the metal-coated microspheres of low density (about 0.84 g/cc) for the electromagnetic radiation in microwave frequencies.