• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.178-186
• /
• 2006

기상 수치예보는 (Numerical Weather Pridiction, NWP)는 바람, 기온, 등과 같은 기상요소의 시간 변화를 나타내는 물리방정식을 컴퓨터로 풀어 미래의 대기 상태를 예상하는 과학적인 방법으로 지구를 상세한 격자 2진부호(GRIdded Binary, 이하 GRIB)로 나누어 그 격자점에서의 값으로 대기 상태를 나타낸다. 지구 각지에서의 각종 관측자료를 기초로 격자점상의 현재값을 구한다. 대용량의 격자데이터는 이진형태이어서 컴퓨터, 서버 저장장치에서 동일형태 데이터로 존재한다. 우리나라 최초의 저궤도 관측 위성인 다목적 실용위성 KOMPSAT-1호(이하, 아리랑 위성1호)는 전자광학카메라(Electro Optical Camera, EOC)를 탑재하여 1999년 12월 21일에 발사된 이후 2006년 1월 현재까지 6여년간 성공적으로 임무를 수행, 7049여회의 영상을 획득하여 국가적으로 귀중한 자료로 활용하고 있다. 아리랑 위성1호는 일일 2-3회 EOC영상을 획득하고 있으며, 임무계획(Mission Planning)은 MP(Mission Planner)가 사용자로부터 자료를 수집하여 임무분석 및 계획 서브시스템(MAPS)에 의해 계산되어진 위성의 제도예측 데이터에 촬영하고자하는 목표지점 좌표를 입력하여 자동명령생성기(KSCG)에 의해 계산된 촬영 경사각도(Tilt)값을 위성에 전송하여 목표지역의 영상을 획득하게 된다. 위성영상 획득에 있어 고가의 위성을 운영하면서 기상의 상태를 정확히 예측하여 실패없이 유효한 영상을 획득하는 것이 무엇보다 중요하다. 본 논문에서는 효율적인 위성임무계획을 위한 기상수치예보 자료를 분석하여 앞으로 발사하게 될 고해상 카메라 탑제위성인 아리랑 위성2호와 3호에 적용하고자 한다. the sufficient excess reactivity to override this poisoning must be inserted, or its concentration is decreased sufficiently when its temporary shutdown is required. As ratter of fact, these have an important influence not only on reactor safety but also on economic aspect in operation. Considering these points in this study, the shutdown process was cptimized using the Pontryagin's maximum principle so that the shutdown mirth[d was improved as to restart the reactor to its fulpower at any time, but the xenon concentration did not excess the constrained allowable value during and after shutdown, at the same time all the control actions were completed within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)

• Journal of the Korean Society of Radiology
• /
• v.6 no.2
• /
• pp.121-127
• /
• 2012

Of this study, it was found that there were 250 mammographic units in total installed and used in the areas for this study, and 36 units were used in general hospitals, 53 units in hospitals and 116 units in clinics. That is, the units in clinics accounted for 50% out of the whole units. As for the image acquisition method, it was found there were 131 units using F/S, 67 units using CR and 7 units using DR respectively. At present, F/S system was mainly used in the areas. As for the materials of target/filter, it was found that Mo/Mo was mostly used (66%), followed by Mo/Rh (25%). As for the size of focus, both 0.1 mm for small focus and 0.3 mm for large focus were mainly used for the units.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1369-1375
• /
• 2016

In this paper, we present a depth extraction method of integral imaging using correlation between elemental images with phase only filter. Integral imaging is a passive three-dimensional (3D) imaging system records ray information of 3D objects through lenslet array by 2D image sensor, and displays 3D images by using the similar lenslet array. 2D images by lenslet array have different perspectives. These images are referred to as elemental images. Since the correlation can be calculated between elemental images, the depth information of 3D objects can be extracted. To obtain high correaltion between elemental images effectively, in this paper, we use phase only filter. Using this high correlation, the corresponding pixels between elemental images can be found so that depth information can be extracted by computational reconstruction technique. In this paper, to prove our method, we carry out optical experiment and calculate Peak Sidelobe Ratio (PSR) as a correlation metric.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.103-108
• /
• 2007

최근 프로젝터의 보편화로 인해 프로젝터를 증강현실의 디스플레이 장치로 활용하는 연구가 활발히 진행되고 있다. 관련 연구들을 흔히 프로젝션 기반 증강현실이라고 부른다. 프로젝션 기반 증강현실을 구현하기 위해서는 스크린의 기하(geometry) 및 컬러(photometry) 정보를 획득하는 과정이 선행되어야 하는데, 이는 프로젝터를 이용하여 정해진 패턴 영상을 투사하고 이를 카메라로 캡쳐한 후, 카메라 영상에 다양한 컴퓨터비전 기술들을 적용함으로써 행해진다. 이러한 스크린 기하 및 컬러 정보 획득 기술은 가시적인(visible) 패턴 영상이 사용자의 몰입감을 저해한다는 단점을 가진다. 특히, 스크린의 기하 및 컬러 정보가 수시로 변하는 환경에서는 가시적인 패턴 영상을 사용하는 기존의 스크린 기하 및 컬러 정보 획득 기술은 유용하지 못하다. 이러한 문제점을 해결하기 위해 일부 패턴 영상을 비가시적(invisible)으로 만드는 기술들이 제안되었다. 본 논문에서는 관련 기술들을 비간섭 프로젝션 기반 증강현실이라고 한다. 특히, 보색 패턴(complementary patterns)을 증강현실 영상에 삽입하는 방법은 부가적인 장비없이 간단한 영상처리만으로 효과적으로 패턴 영상을 비가시적으로 만들어 줄 수 있으며, 최근 가상 스튜디오에 활용하는 방안이 모색되고 있다. 그러나, 삽입된 보색 패턴의 세기와 비가시성 사이는 상반관계(trade-off)를 가지므로, 일반적인 환경에서는 보색 패턴의 비가시성을 보장할 수 없다. 본 논문에서는 이러한 보색 패턴의 비가시성을 극대화하기 위해 컨텐츠 적응형 패턴 삽입 기술을 제안한다. 증강현실 영상의 색감 및 텍스처의 복잡도에 따라 크게 4 가지 경우로 분류하여 부분적으로 다른 채널 및 세기로 보색 패턴을 삽입한다. YIQ 컬러 공간에서 표현된 증강현실 영상을 균일한 크기의 영역으로 나눈 다음, 각 영역에 대해 I 성분이 지배적이면 Q 채널에 패턴을 삽입하고 Q 성분이 지배적이면 I 채널에 패턴을 삽입한다. 한편, 각 영역에 대해 텍스처의 복잡도가 크다면 강한 패턴을, 복잡도가 작으면 약한 패턴을 삽입한다. 여기서, 텍스처의 복잡도는 간단한 미분 필터(derivative filter)를 이용하여 계산된다. 다양한 실험 및 사용자 평가를 통해, 제안된 방법은 기존 방법에 비해 크게 두 가지 상반관계를 가지는 장점을 가짐을 확인하였다. 스크린의 기하 및 컬러 정보를 획득하는 성능 면에서 제안된 방법이 기존의 방법과 유사하도록 채널 및 패턴의 세기를 결정한다면, 기존의 방법에 비해 패턴의 비가시성이 크게 개선된다. 반대로, 제안된 방법의 패턴의 비가시성이 기존의 방법과 유사하도록 채널 및 패턴의 세기를 결정한다면, 기존의 방법에 비해 스크린의 기하 및 컬러 정보를 획득하는 성능이 크게 개선된다.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.8
• /
• pp.1-9
• /
• 2019

With the development of imaging information communication technology in modern society, imaging acquisition and mass production technology have developed rapidly. However, crime rates using these technology are increased and forensic studies are conducted to prevent it. Identification techniques for image acquisition devices are studied a lot, but the field is limited to images. In this paper, camera model identification technique for video, not image is proposed. We analyzed video frames using the trained model with images. Through training and analysis by considering the frame characteristics of video, we showed the superiority of the model using the P frame. Then, we presented a video camera model identification system by applying a majority-based decision algorithm. In the experiment using 5 video camera models, we obtained maximum 96.18% accuracy for each frame identification and the proposed video camera model identification system achieved 100% identification rate for each camera model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.195-201
• /
• 2020

This study studied scoliosis, one of the most common modern diseases caused by lifestyle patterns of office workers sitting in front of computers all day and modern people who use smart phones frequently. Scoliosis is a typical complication that takes more than 80% of the nation's total population at least once. X-ray are used to test for these complications. X-ray, a non-destructive testing method that allows scoliosis to be easily performed and filmed in various areas such as the chest, abdomen and bone without contrast agents or other instruments. We uses NI DAQ to miniaturize digital X-ray imaging devices and image intensifier in self-shielding housing with Vision Assistant for drawing lines to the top and the bottom of the spine to acquire angles, i.e. curvature in real-time. In this way, the research was conducted to see scoliosis patients and their condition easily and to help rapid treatment for solving the problem of posture correction in modern people.

• Journal of the Korean Society of Radiology
• /
• v.8 no.1
• /
• pp.27-33
• /
• 2014

Medical imaging has increased rapidly in the increase of interest in health, with the development of computer technology, digitization of medical imaging is rapidly advancing, PACS has been introduced to the medical field. Increase in the production of medical images by these phenomena made increased the workload of radiologist who must read a medical image. in response to the need for secondary diagnosis using a computer, The term of CAD in medical radiology field was introduced. In this study, we have proposed a CAD algorithm for the interpretation of the image obtained by the digital X-ray mammography equipment. The experiments were performed by programmed in Visual C++ for the proposed algorithm. A result of the execution of the CAD algorithm seven sample images, the results of five samples was confirmed in breast cancer and benign tumors, both the images sample was error processing. If you use a program that implements this with the algorithm proposed in this study it is helpful to reading breast images, and it is considered to contribute significantly to the early detection of breast cancer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.63-68
• /
• 2018

Offloading is a method of communicating, processing, and receiving results from some of the applications performed on local computers to overcome the limitations of computing resources and computational speed.Recently, it has been applied in mobile games, multimedia data, 360-degree video processing, and image processing for Internet broadcasting to speed up processing and reduce battery consumption in the mobile computing sector. This paper implements a viewer that enables users to convert various flat-panel images and view contents in a wireless Internet environment and presents actual results of an experiment so that users can easily understand the images. The 360 degree spherical image is successfully converted to a plane image with Double Panorama, Quad, Single Rectangle, 360 Overview + 3 Rectangle depending on the image acquisition position of the 360 degree camera through the interface. During the experiment, more than 100 360 degree spherical images were successfully converted into plane images through the interface below.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.308-315
• /
• 2015

The purpose of this study, using 3D printer, was tried to fabricate the short arm cast of mesh types that can be hygienic and adequate ventilation with a good radiography. We used the multi channel computed tomography (MDCT) with three dimension printer device of the fused deposition modeling (FDM) techniques. The material is used a degradable plastic (poly lactic acid, PLA). Three-dimensional images of the short arm were obtained in the MDCT and then make the three-dimensional volume rendering. Three dimension volume rendering of the short arm is implemented as a tomography obtained in MDCT. Virtual mesh type cast model was output as three-dimensional images is designed based on the three-dimensional images of the short arm. As a results, the cast output by 3D printers were able to obtain excellent radiograph images than the conventional cast, and then it can decreased itching with unsanitary, and can break down easily to the cast. In conclusion, the proposed virtual mesh type cast output by 3D printers could be used as a basis for future three-dimensional printing cast productions and offered help to patients in the real life.

• Journal of the Korean Society of Radiology
• /
• v.1 no.2
• /
• pp.13-22
• /
• 2007

The purpose of this study was to survey a development of the wireless transmission system of medical images for ubiquitous medicine. There have been many changes in medical equipments and medical record medical treatment and medical record within hospital and PACS(Picture Archiving Communication System) which is picture management system for patients can be typical cases. It is difficult to use these automated medical systems unless they are within hospital and in case of rapid image reading in the emergency cases or in absence of doctor, it is difficult to perform it immediately. The present study implemented an image transmission system using CDMA connection so that images in the server can be viewed at any time and in any place. Remote wireless diagnosis based on medical images using PDA is applicable to medical areas that require mobility, and the use of PDA can be an ideal alternative for point of care. The use of PDA enables prompt and accurate access to digital medical images, which in turn reduces medical accidents and improves the quality of medical services through high productivity and efficiency of medical practitioners' works. It also enables quick response to patients' demands and high-quality medical services and, consequently, patients' high satisfaction.