• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.234-235
• /
• 2017

The bonding of the asphalt-based waterproof sheet is carried out in such a manner that the sheet and the sheet are adhered together and the lower adhesive layer of one sheet is adhered to the upper film layer of the other sheet, and the asphalt layer and the PE or HDPE film layer are bonded. When the joints are formed in the form of junctions between heterogeneous materials and exposed to the concrete joint movements and other deteriorating factors, the integrity of the joints can deteriorate and problems such as lifting and peeling off of the joints can occur. Therefore, this study was carried out to prevent unstable joint adhesion of the asphalt compound and film layer and to prevent defects in the adhesion between self - adhesive waterproof sheets. The self-adhesive waterproof sheet of this study can maximize bond stability by inducing bond between asphalt compounds during sheet-to-sheet bonding, thereby improving bonding strength.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.212-215
• /
• 2009

요구되는 접착력과 그라프트율을 만족시킬 수 있는 변성폴리프로필렌의 제조 기술 확립을 목표로 변성폴리프로필렌의 최적 합성을 위한 과산화물, 변성폴리프로필렌의 최적 합성을 위한 촉매 및 반응몰비, 변성폴리프로필렌의 최적 합성을 위한 반응온도, 반응시간 확립을 통한 변성 PP 제조기술을 개발하였으며, $90{\Phi}$ extruder에서 상업 생산을 위한 공정 제어 기술 확립과 접착력과 그라프트율 등을 나타내는 변성폴리프로필렌의 최적 합성 조건 확립을 통한 폴리프로필렌 엘라스토머 복합수지용은 물론 강관 코팅용, 시트 및 필름용 등의 변성 폴리프로필렌 제조기술을 개발하였다. 이들 변성 PP를 활용하여 매트릭스 및 필러, 분산 조건 변경 시험, 엘라스토머 폴리프로필렌 컴파운드 최적 분산 조건 확립, 엘라스토머 폴리프로필렌 컴파운드 pilot 생산 및 제품 분석을 통하여 초고강성 범퍼, 룸미러 케이스 소재, 인패널, 도어용으로 사용될 수 있는 자동차 부품용 폴리프로필렌 복합수지 개발을 완료하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3016-3021
• /
• 2011

While there is ample information on the investment plans about Korea's selected new growth businesses, it is hard to find any analysis on the valuation of the projects. In this paper, I intend to do a valuation for the three particular technologies, which are solar cell, automotive battery, and bio-pharmaceutical, based on compound option model so that the valuation can capture not only the expected net cash flow but also the value originated from the flexibility of the decision maker. In addition, the real option pricing theory is reviewed and its practical limitations are thoroughly investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5595-5600
• /
• 2012

This paper is to review and study about the crystallization nucleating agent to improve the heat-resistance properties of poly(lactic acid). Four sub-micron sized nucleating agents, metallic salts of 2,2'-methylene bis(4,6-di-tert-butylphenol), were prepared and used as a crystallization nucleating agent. Thermal and mechanical properties of polymer compounds were investigated by DSC, HDT and UTM. As the results, While the heat-resistance properties of the polymer compound samples were increased linearly with the contents of nucleating agent as well as their smaller size. Among them, the highest heat-resistance property of compound was observed with 2 wt% of MPZ2. HDT values of PL98Z2 compound was $116^{\circ}C$ at 0.455Mpa.

• Elastomers and Composites
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2008

Far-infrared vulcanization of ethylene-propylene-diene terpolymer(EPDM) compounds has been studied in comparison with hot air vulcanization. Vulcanization characteristics of EPDM compounds were measured by degree of curing and temperature of specimens in vulcanization process. As a result, degree of curing by far-infrared of EPDM compounds was shown to be higher value than that by hot air at the same vulcanization temperature. Especially, degree of curing by far-infrared on 3 mm thickness of EPDM compounds was increased by two times compared to that by hot air. While the increase of thermal conductivity of EPDM compounds highly improved degree of curing by far-infrared, that hardly improved degree of curing by hot air.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.74-81
• /
• 2016

The aim of this study was to find the initial design value of turbine blade for electrical type turbocompound system generating 10 kW. Turbocompound is one of the waste heat recovery system applying to internal combustion engine to recover exhaust gas energy that was about 30 % of total input energy. To design the turbine blade, 1-D mean line flow model was used. Exhaust gas temperature, pressure, flow rate and turbine rotating speed was fixed as primary boundary conditions. The velocity triangles was defined and used to determine the rotor inlet radius and width, the rotor outlet radius at shroud and radius at hub, the rotor flow angles and the number of blades.

• Polymer Science and Technology
• /
• v.9 no.5
• /
• pp.389-393
• /
• 1998

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.399-404
• /
• 2018

This study compared the tackiness and adhesion of different tire tread compounds and rubber cements before and after vulcanization. The tackiness of natural rubber (NR) cement was the highest for all tread compounds before vulcanization, and the decrease in tackiness of NR cements over time was smaller than that of synthetic rubber cements. The tackiness before vulcanization was affected by the glass transition temperature of the rubber used in the cement and the decrease in tackiness over time of NR was smaller compared to that of using the synthetic rubber. The adhesion of NR-based cements after vulcanization was high for NR tread compounds but low for synthetic rubber tread compounds. On the contrary, the adhesion of emulsion (SBR) and solution SBR cements was high on all tread compounds which was shown to be higher when the rate of vulcanization of cement rubber was lower.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.231-237
• /
• 2012

This study measured the mechanical and damping properties of EPDM compounds including fillers. Semi-reinforcing furnace black (SRF), high abrasion furnace black (HAF) and acetylene black were used as fillers. Dicumyl peroxide (DCP) were used as curing agents. The measurements were conducted using a moving die rheometer (MDR), durometer, universal testing machine (UTM), compression set and dynamic mechanical analysis (DMA). The tensile strength and elongation at break increased with increasing SRF contents in EPDM compounds. However, they decreased with increasing the amount of acetylene black. In the inspecting temperature range, EPDM compound filled acetylene black had stable storage modulus. Furthermore, the tan ${\delta}$ of the EPDM compounds obtained was enhanced by compounding with acetylene black.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1442-1444
• /
• 2003

폴리머 애자용 shed 재료의 전기방전에 대한 열화내성과 표면이 오염된 조건하에서도 우수한 발수성 유지는 제품의 장기성능에 있어서 가장 중요한 인자들이다. 내트래킹성 확보를 위한 보강재로는 ATH가 주로 사용되고 있으며 ATH의 첨가량이 많을 수록 내트래킹성은 대체로 향상되는 것으로 되어 있다. 그러나 애자 제조시 무결점 성형성의 만족이 대단히 중요하기 때문에 ATH를 고충진하는 경우 사용하는 process oil들의 종류 및 첨가량을 고려한 ATH 첨가량의 최적화는 필요하다. 본 논문에서는 ATH를 170 part로 다량으로 첨가하면서 화학적 구조와 점도가 다른 몇 가지 실리콘 fliud들을 사용하여 무결점 성형에 적합한 가소도를 갖는 컴파운드를 제조하여 기본물성과 초고압 옥외절연물의 shed 재료로서 장기성능에 영향을 주는 방전열화내성과 표면발수성의 회복특성을 평가하였다. 컴파운드의 성형작업성과 관련이 큰 가소도는 fluid 점도에 따라 상당한 차이를 보이므로 실리콘 fluid 종류의 선택과 첨가량의 최적화에는 성형작업성, 발수성 회복특성, 열화내성 등의 고려가 필요하다. 무결점 애자성형을 위한 진공 사출에서 고무 컴파운드의 가소도가 중요한데 동일한 ATH첨가조건에서 일정한 가소도를 갖게 하는데 필요한 양은 fluid들의 종류에 따라서 상당한 차이가 있었다. 코로나 처리후 발수성 회복특성은 fluid들의 분자크기와 반응기의 종류에 따라 상당히 영향을 받았으며 분자가 클수록 초기회복속도는 다소 느렸지만 평상시에 늘 유지되는 상시발수성은 다소 높게 유지되었다. 아크와 트래킹 방전에 의한 무게 감소는 ATH가 과량으로 첨가되어 상당히 적었으며 fluid의 분자가 크면서 페닐기를 가진 fluid들이 첨가된 고무가 우수한 특성을 보였다.