• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.21-25
• /
• 2014

Scan capabilities of Fabry-Perot cavity (FPC) antennas are investigated for the case of a $4{\times}1$ thinned array placed inside the cavity. The FPC array antenna has higher maximum gain and lower sidelobe level (SLL), but the maximum scan angle of the thinned array is 14-17% lower than the patch array alone, due to increased mutual coupling in the FPC structures. However, unlike the bare thinned array, the SLL of FPC array does not suffer from the grating lobe problem even though it has a relative large element spacing of more than $1.0{\lambda}_0$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.20 no.1
• /
• pp.37-51
• /
• 1994

Empty cross-linked chitosan microcapsule was prepared by chemical cross-linking reaction using glutaraldehyde(GA). Chitosan bead was also prepared by coacervation method using sodium hydroxide. The technique involves the formation of a chitosan solution in the discontinuous phase of W/O emulsion. The factors influencing the emulsion stability have been examined to establish optimum conditions Chitosan microcapsules were useful for encapsulation of biological materials, and chitosan bead was useful to prepare the biologically active peptide-bound polysaccharide. As a model compound Gly-His-Lys, cell growth factor, was successfully coupled to chitosan bead.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.4
• /
• pp.291-302
• /
• 2004

Blast-induced anisotropic rock damage around a blast-hole was analyzed by a using numerical method with user-defined subroutine based on continuum damage mechanics. Anisotropic blasting pressure was evaluated by applying anisotropic ruck characteristics to analytical solution which is a function of explosive and rock properties. Anisotropic rock damage was evaluated by applying the proposed anisotropic blasting pressure. Blast-induced isotropic rock damage was also analyzed. User-defined subroutines to solve anisotropic and isotropic damage model were coded. Initial rock damages in natural ruck were considered in anisotropic and isotropic damage models. Blasting pressure and elastic modulus of rock were major influential parameters from parametric analysis results of isotropic rock damage. From the results of anisotropic rock damage analysis, blasting pressure was the most influential parameter. Anisotropic rock damage area in horizontal direction was approximately 34% larger and about 12% smaller in vertical direction comparing with isotropic rock damage area. Isotropic rock damage area under fully coupled charge condition was around 30 times larger than that under decoupled charge condition. Blasting pressure under fully coupled charge condition was estimated to be more than 10 times larger than that of decoupled charge condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.392-401
• /
• 2012

This paper gives a electromagnetic coupling mechanism of the high altitude electromagnetic pulse (HEMP) into large- scale underground multilayer structures using analytic and numerical methods. The modeling methods are firstly addressed to the HEMP source which can be generated by intentional nuclear explosion. The instantaneous and intense electromagnetic pulse of the HEMP source is concerned from DC to 100 MHz band, because the power spectrum of the HEMP is rapidly decreased under -30 dB over the 100 MHz band. Through this range, a penetrated electric field distribution is computed within the large-scale underground multilayer structures. As a result, the penetrated electric field intensities at 0.1 and 1 MHz are about 10 and 5 kV/m, respectively. Therefore, additional shielding techniques are introduced to protect buried structures within the large-scale underground structures such as high-lossy material and filtering structures (wire screen).

• Polymer(Korea)
• /
• v.34 no.2
• /
• pp.159-165
• /
• 2010

Dipyridine-terminated polystyrenes and polybutadienes were synthesized by the chain endfunctionalization reaction of polystyryllithium (PSLi) and polybutadienyllithium (PBDLi) with di(2-pyridyl) ketone(DPK) using a living anionic polymerization method in the Ar-glove box. Living polymeric lithiums with low molecular weights (Mw=1000~2000 g/mol) were used to investigate the chain end-functionalization yield with DPK and the degree of coupling reaction by the attack of organolithium to the pyridine ring in the presence of TMEDA using GPC, $^1H$-NMR, $^{13}C$ analysis. DPK-terminated PBD exhibited much higher functionalization yield and less amount of coupling reaction compared with DPK-terminated PS. 86% functionalization yield with 9% degree of coupling was obtained when the PBDLi was added dropwise to DPK solution at room temperature. The functionalization yield was increased as the reaction temperature decreased, however, no LiCl effect was observed in this chain end-functionalization reaction with DPK.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.537-543
• /
• 2013

In this paper, a novel radial beam coupling model was proposed and the design parameters were studied for the efficient transmission of torque. To develop a high performance radial beam coupling, an analytical way to predict the performance in design phase is required. One of the best ways to estimate the performance of the coupling without manufacturing is to evaluate the stress and torsional stiffness by building a finite element model with a special attention to the radial beam cutting part. For the best results of FEA, the material properties were obtained through testing. To verify the reliability of finite element model, the results of FEA were compared with the experiments. The main design parameters of radial beam cutting width, radial beam cutting depth, and radial beam cutting direction were considered for the performance of radial beam coupling.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.31-38
• /
• 2006

Micellar electrokinetic capillary chromatography(MECC) and HPLC with ion-pairing mechanism were applied for the separation of the well known environmental wastes from dye industry. These compounds include H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid, and are known to be the diazo components of the azo dye. MECC method was also applied to separate few acid dyes including Acid Orange 7, Acid Orange 5 and Acid Blue 92 and direct dye such as Direct Red 80. Informations about the diazo components of any azo dye could be obtained by comparison of electropherogram of the reduction solution of a given dye with those obtained from standard materials such as H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid. It has been concluded that MECC and HPLC with ion-pairing mechanism could be successfully applied for the analysis of unknown dyes and their diazo components.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.72-74
• /
• 2012

위성의 상태를 모니터링하고 임무수행 준비 및 결과를 분석하기 위해 위성에서는 주기적으로 텔레메트리 프레임을 생성하여 지상으로 전송한다. 텔레메트리 프레임을 통해 많은 데이터가 전송될수록 정확한 위성의 상태 분석이 가능하고 위성 운용을 용이하게 할 수 있다. 그러나 위성에서 지상으로 전송할 수 있는 텔레메트리의 전송속도는 하드웨어의 성능에 따라 제한되며, 특히 저궤도 위성의 경우에는 지상과 교신이 가능한 시간이 짧다는 제약으로 인해 한정된 시간 안에 정해진 전송속도로 보낼 수 있는 데이터의 양에는 한계가 있다. 이러한 제약조건 하에서 최대한 많은 정보를 효율적으로 전송할 수 있도록 위성의 텔레메트리를 생성할 때 비트 정보들을 모아 하나의 바이트로 묶어서 텔레메트리 크기를 최소화하는 방법을 이용한다. 위성비행소프트웨어는 태스크 스케쥴링, 열제어, 전력제어, 자세제어, 원격명령처리, 원격측정데이터 처리 등의 기능별로 모듈화 되어있다. 각 모듈마다 텔레메트리로 전송되는 데이터들이 존재하고 비트 정보들을 모으는 기능도 해당하는 모듈에서 각각 담당한다. 따라서 각 모듈들이 독립적이지 못하고 텔레메트리 처리를 담당하는 모듈과 다른 모듈들 간의 커플링(coupling)이 존재하게 되어 하나의 텔레메트리 데이터 변경이 여러 모듈에 영향을 미치게 된다. 본 논문에서는 모듈들 간의 커플링을 최소화하고 텔레메트리의 변경사항이 위성비행소프트웨어 코드 자체에는 영향을 주지 않도록 하기위한 데이터베이스 테이블을 이용한 텔레메트리 처리 방안에 대하여 설명한다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.383-386
• /
• 1998

An application determination of the dominant-mode fields in ridge waveguides at all frequencies has been made. Evaluations of the fields along the walls of a commercially standard single-ridge guide having a usable frequency range from 3.75 to 15.0 Gc, This paper presented the analysis of the mode directive coupling characteristics of two ridge waveguide using mode matching techniques for TE10 mode.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.4
• /
• pp.509-518
• /
• 2019

Analyses with various Sea Surface Temperature (SST) products indicate that the interannual variability of the area-averaged SST in the East/Japan Sea (EJS) is well correlated to that of Pacific Decadal Oscillation (PDO) during 1979-2018, especially in the autumn. The regression analysis with the wind vectors at 200 hPa, where the strongest jet stream flows, suggests that the long-term variability of the intensity as well as the meridional movement of the jet stream are related to the coupling of the autumn EJS SST and PDO. When the axis of the jet stream moves poleward (equatorward) with its weakening (strengthening), both the EJS SST and North Pacific SST increase (decrease). This suggests that both the intensity and meridional movement of the jet stream are possibly related to the coupling of the autumn EJS SST and PDO. However, effects of a weak jet stream during the summer and the strong East Asian winter monsoon make weak coupling between the EJS SST and PDO.