• 한국분무공학회지
• /
• 제12권3호
• /
• pp.154-159
• /
• 2007

Spray tip penetration and spray angle for one main injection were measured at the atmospheric condition with the fuel injection pressure of 270 bar and 540 bar. It investigates an effect of different nozzle hole geometry of conventional cylindrical one and those of elliptical ones. Injection period represented by injector pulse drive was fixed at 1ms. From the result of this study, it is shown that spray tip penetration becomes shorter and spray angle becomes wider with the elliptical nozzle hole geometry due to fast break-up of a fuel liquid column.

• 한국연소학회지
• /
• 제16권4호
• /
• pp.1-7
• /
• 2011

The purpose of this study was to analyze the effect of pilot injection strategy on the combustion and emissions characteristics in a four cylinder common-rail direct injection diesel engine fueled with biodiesel(soybean oil) blend. The tested fuel was mixed of 20% biodiesel and 80% ULSD(Ultra low sulfur diesel) by volume ratio. The experiments were performed under two load conditions, and results were compared with those of single injection. The experimental results showed that the ignition delay of BD20 was shorter than compared to that of ULSD in the case of low load condition. Also, the fuel consumption of BD20 was more higher than that of ULSD. Fuel consumption by applied pilot injection strategy were generally decreased compared with that of single injection. In the case of pilot injection, the exhaust emissions such as CO and HC emissions were decreased compared to the single injection.

• 대한기계학회논문집B
• /
• 제38권2호
• /
• pp.129-137
• /
• 2014

본 연구에서는 바이오디젤연료 혼합비변화에 대한 디젤엔진의 배기특성에 대해 조사하였다. 실험에 사용된 연료는 경유와 바이오디젤(폐식용유) 혼합연료 BD3, BD5, BD20, BD50 및 BD100을 사용하였으며, 실험변수로서 분사압력(${\Delta}p_{inj}$)을 400bar, 600bar, 800bar, 1000bar 및 1200bar로 설정하였다. 분사압력과 바이오디젤 혼합연료 혼합비에 따른 정량적인 NOx와 Soot의 배기특성 해석을 위하여 통계학에 기초한 피어슨 상관계수와 스피어만 상관계수의 개념을 도입하였다. 본 연구의 결과로서 실험 조건 전체에 대한 피어슨 상관계수는 -0.732, 스피어만 상관계수는 -0.724로 NOx와 Soot 발생의 상관관계가 선형적이다. 특히 분사압력 800bar 조건에서 피어슨 상관계수가 -0.089으로 NOx와 Soot 배출량 상관관계가 0에 가깝기 때문에, 바이오디젤 연료 혼합비 제어를 통한 NOx와 Soot의 동시저감이 가능하다고 판단된다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5912-5918
• /
• 2014

산업이 고도로 발달함으로 인하여 화석연료의 사용이 많아짐으로 인하여 환경문제가 대두되고 있으며, 이에 자동차의 매연에 대한 연구가 필요하다. 일반적으로 공기는 흡기 매니폴드를 통하여 엔진에 흡입된다. 따라서 본 연구에서는 매연증가와 출력저하의 하나의 원인이 되는 카본 퇴적물을 세척하여 노후 된 자동차의 배출가스의 저감과 출력향상, 배기가스 저감량, 출력변화 그리고 공전속도의 안정성을 분석 검토하는데 그 목적이 있다. 흡기 매니폴드 내의 카본을 클리닝하였을 때의 자동차 매연의 발생정도를 검사장비(KD147)를 통하여 분석하였다. 흡기 매니폴드 클리닝으로 매연의 감소효과가 있음을 확인하였다.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.80-89
• /
• 2004

In order to confront the increasing air pollution and the tightening emission restrictions, this research developed a diesel engine using DME, the advanced smoke-free alternative fuel. By numerical analysis, flow field, spray, and combustion phenomenon of the DME engine was presented. Using an experimental method, the configuration of the fuel supply system and operation/power performance was tested with the current plunger pump. Most emission performance, especially smoke performance was significantly improved. The possibility of conversion from the current diesel engine into the DME engine was affirmed in this research. However, it was found that the increase of engine RPM and fuel amount need to be properly adjusted through matching the characteristics of fuel and injector for further improvement.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.107-114
• /
• 2009

A Common-Rail Direct Injection (CRDI) system for high speed diesel engines was developed to meet reductions of noise and vibration, emission regulations. High pressure in the common rail with electric control allows the fuel quantity and injection timing to be optimized and controlled throughout a wide range of engine velocity and load conditions. In this study, CRDI system analysis model which includes fuel and mechanical systems was developed using commercial software, AMESim in order to predict characteristics for various fuel injection components. The parameter sensitivity analysis such as throttle size, injection rate, plunger displacement, supply pressure of fuel injection for system design are carried out.

• 대한기계학회논문집B
• /
• 제34권12호
• /
• pp.1121-1126
• /
• 2010

1.9L 커먼레일 직접분사 디젤 엔진을 이용하여 1500rpm 2.6bar BMEP 에서 다량의 EGR (약 41%)과 연료분사 제어를 통한 저온디젤연소 영역에서 연료의 특성이 연소와 배기가스에 미치는 영향을 분석하 였다. 사용한 연료는 세탄가 30 에 대하여 방향족 성분 (20%: A20, 45%: A45)과 T90 온도($270^{\circ}C$: T270, $340^{\circ}C$: T340)의 조합으로 네 개이다. 주어진 엔진 운전 영역에서 실험계획법을 이용하여 방향족 성분 및 T90 온도에 따른 연소 및 배기가스에 미치는 영향을 분석하였다. 착화지연 기간은 T90 온도가 지배적인 인자로 T90 온도 증가에 따라 착화지연 기간도 증가하였다. 저세탄가에 의한 착화지연 기간의 증가로 네 가지 연료 모두 PM 배출은 거의 없었다. NOx 배출은 방향족 성분이 지배적인 인자로 방향족 성분증가에 따라 NOx 배출이 증가하였다.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.10-15
• /
• 2011

This paper describes the engine performance and combustion characteristics of a CRDI diesel engine, operated by electronically controlled diesel fuel injector with variable injection timing. This experiment focused on fuel injection timing and pressure about combustion characteristics of CRDI diesel engine. EGR was excepted because it would be furtherly analyzed with additional experiments. The experiment was conducted under the circumstance of engine torque for 4, 8, 12 and 16 kgf-m and fuel injection timing for $15^{\circ}$, $10^{\circ}$ and $5^{\circ}$ BTDC, at the engine speed of 1100, 1400, 1700 and 2000 rpm. Fuel injection was controlled to retard or advance initiation of the injection event by electronically controlled fuel injection unit injector on the personal computer. When fuel was injected into the cylinders of a CRDI diesel engine it would go through ignition delay before starting of combustion. Therefore, fuel injection timing of CRDI diesel engine had a significant effect upon performance and combustion characteristics. Depending on the injection timing the fuel consumption rate following the rotational speed and torque was 3~78 g/psh (1.7~30.6%). The range of fuel injection timing that resulted in low fuel consumption overall was BTDC 15-10 degrees.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.40-57
• /
• 2004

The effects of triple (pilot, main and after) injection on combustion and emission characteristics in a HSDI (High-Speed Direct Injection) diesel engine were investigated using a single-cylinder optical diesel engine equipped with a common-rail injection system. The pilot injection affected the spray and combustion evolution of the following main injection. It was found that the pilot injection reduced the ignition delay, which led to lowered NOx (Nitric Oxides) level, and increased IMEP (Indicated Mean Effective Pressure) due to slow combustion pace during an expansion stroke. The after-injection was shown to be effective in reducing PM (Particulate Matter) even when a small amount of fuel was added. The results suggest that a proper combination of individual injection strategy could bring about a good synergetic effect on engine performance and emission.

• 전기전자학회논문지
• /
• 제17권1호
• /
• pp.63-70
• /
• 2013

본 연구에서는 차량용 연료히터의 전기적 성능검사 챔버를 구현한다. 겨울철 저온환경의 영향을 받는 디젤 엔진이 냉각될 경우 일정한 온도 이하로 내려가면 파라핀과 같은 반고체 상태인 왁싱(Waxing)물질을 형성하여 엔진 시동이 잘 걸리지 않게 하는 원인이 된다. 히터내에 센서를 안착시켜 통합한 일체형 통합히터는 시동성 평가에 중요한 요소이며, 성능평가 시험 챔버 시스템을 통해 전기적인 특성을 시험한다. 최근 CRDI(커먼레일) 엔진을 주로 사용함에 따라 연료히터로 디젤오일을 가열하여 점화성능을 향상시키기 위한 연료히터 성능시험은 엔진의 시동성을 향상시키는 중요한 요소이다. 따라서 연료히터의 전기적 성능시험 검사항목은 상온, 극저온, 극고온에서 동작검사, 시험저항 설정에 따른 저항동작 지연시간 및 전류동작 지연시간, 온도변화에 따른 바이메탈 지연시간 검사, 블록히터의 전류 및 저항 검사, 히팅 운전검사 등을 수행하도록 설계한다.