• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.61-72
• /
• 2001

The study was carried out to investigate the surroundings and benefit analysis on the planting investment of Thailand for securing a stable supply of timber through overseas planting, The results show that Thailand government is planing to increase the coverage of forest from 25% to 40%, encouraging planting over the country. More advantages and incentives are given in the investments in planting and wood-processing industries such as plywood, veneer, and chip & hard board, etc. In Thailand Eucalyptus species which are most popular in planting as they are lucratively used as a material of pulp. The Internal rate of return (IRR) in the study was ranged from 29.1 % to 59.3.

• Journal of Hydrogen and New Energy
• /
• v.22 no.1
• /
• pp.109-117
• /
• 2011

Since the thermal performance of cycles for use of low-temperature source is low if a pure working fluid is used, the cycles using ammonia-water binary mixture as a working fluid has attracted much attention over past two decades. Recently, several commercial power plants using Kalina cycles have been built and being operated successfully. In this work thermodynamic performance of Kalina cycles using ammonia-water mixture as a working fluid is investigated for the purpose of extracting maximum power from low-temperature energy source. Special attention is paid to the effect of system parameters such as concentration of ammonia and turbine inlet pressure on the characteristics of the system. Results show that the system performance is influenced sensitively by the ammonia concentration, and the role of the performance of heat exchangers is crucial.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.782-787
• /
• 2008

The Kalina cycle simulation study was carried out for a preliminary design of a geothermal power generation system. The Kalina cycle system can be used for the utilization of a low-temperature heat sources such as geothermal and industrial waste heat that are not hot enough to produce steam. The sea/river water can be considered as a cooling media. A steady-state simulation model was developed to analyze and optimize its performance. The model contains a turbine, a pump, an expansion valve and heat exchangers. The turbine and pump were modelled by an isentropic efficiency, while a condenser, an evaporator and a regenerative heat exchanger were modeled by UA-LMTD method with a counter-flow assumption. The simulation results show that the power generation efficiency over 10% is expected when a heat source and sink inlet temperatures are $100^{\circ}C$ and $10^{\circ}C$ respectively.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.47-52
• /
• 1992

A alkalophilic, thermophilic bacterium TA-11 which produce $\beta$-galactosidase highly was isolated from compost and identified to the genus Bacillus. $\beta$-galactosidase production was maximized when it was incubated in synthetic medium containing 1.5% lactose. 0.4% peptone, 0.4% teast ext., 0.2% $MgSO_4$ 0.05% $NH_4$Cl and 0.2% NacL(initial pH; 10.0) at $50^{\circ}C$ for 2 days in reciprocal shaker.

• Journal of Hydrogen and New Energy
• /
• v.31 no.2
• /
• pp.242-249
• /
• 2020

The Kalina cycle (KC) is considered as one of the most efficient systems for recovery of low grade heat. Recently, Kalina based power and cooling cogeneration cycles (KPCCCs) have been suggested and attracted much attention. This paper presents an energy and exergy analysis of a recently suggested KPCCC with flexible loads. The cycle consists of a KC (KCS-11) and an aqua-ammonia absorption refrigeration cycle. By adjusting the splitting ratios, the cycle can be operated with four modes of pure Kalina cycle, pure absorption cooling cycle, Kalina-cooling parallel cycle, and Kalina-cooling series cycle. The effects of system variables and the operating modes on the energetic and exergetic performances of the system are parametrically investigated. Results show that the system has great potential for efficient utilization of low-grade heat source by adjusting loads of power and cooling.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.400-405
• /
• 1994

The conditions for ${\beta}$-galactosidase production from alkalophilic, thermophilic Bacillus sp. TA-11 were investigated. The maximal enzyme production was obtained when the strain was cultured at $50^{\circ}C$ for 5 days with fed-batch culture in the optimal medium containing 1.5% lactose, 0.6% yeast extract 0.15% $K_2HP0_4$and initial pH 9.5, and then final enzyme activity under the above conditions was 5200 unit/ml of cell free extract.

• The Journal of Information Systems
• /
• v.31 no.1
• /
• pp.91-113
• /
• 2022

Purpose In the era of the 4th industrial revolution, the introduction of unmanned stores is rapidly spreading throughout the entire distribution market. Unmanned stores are stores where consumers purchase products on their own through machines and not through contact with people. As there are no managers in unmanned stores, Servicescape is expected to have many effects on the purchasing behavior of consumers. Therefore, this study aims to observe the effect of Servicescape on consumer behavioral intentions. Design/methodology/approach This study wanted to look at the relationships among Servicescape in unmanned stores, utilitarian values, hedonic values, satisfaction, and continuous use intentions. The collected(n=211) from individuals who have experienced in using unmanned stores was analyzed with SmartPLS2.0 to test proposed hypotheses. Findings The research results are as follows. First, it was shown that the space, convenience, and comfortableness of Servicescape have positive effects on utilitarian value, and cleanliness did not have significant effects on utilitarian value. Second, it was shown that space and comfortableness had positive effects on hedonic value, and convenience and cleanliness did not have significant effects on hedonic value. Lastly, it was shown that utilitarian values and hedonic values have positive effects on satisfaction, and satisfaction was found to have positive effects on continuous use intentions.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.133-142
• /
• 2023

This study aims to examine how blockchain technology is currently being applied in various fields, as well as the methods and limitations involved in constructing blockchain, and to gauge the potential future of blockchain technology. The success or realization of the technology's applications will depend on how quickly certain technical challenges can be overcome. This paper emphasizes that with the advancement of blockchain technology, when transparency and reliability are improved, it will become a significant force in changing not only the industrial sector but also the economic and political domains. Even if the problem awareness demonstrated by blockchain technology cannot be the most effective solution for solving real-world problems, the framework it presents will provide a significant window for us to understand the problems we face in reality.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.263-271
• /
• 2015

Commercial AR(Alkali Resistant)-glass fiber has a good chemical resistant property, but also has a problem of difficulty in fiberizing process because of high viscosity in melted glass compare with E-glass fiber which is the most widely used for reinforced fiber of composite materials. In this study, we fabricated AR-glass fiber with low zirconia contents compare with commercial AR-glass fiber relatively, and measured properties against E-glass fiber. We obtained transparent clear glass with zirconia contents of 0.5~16 wt% by melting at $1600^{\circ}C$ for 2 hours. These AR-glass samples had high visible transmittance of 89~90 %, softening temperature of $703{\sim}887^{\circ}C$. And softening temperatures of them were increased according to the increasing zirconia contents. Compare with E-glass, AR-glass contains 4 wt% zirconia has different value of $-94^{\circ}C$ in softening temperature, $+68^{\circ}C$ at Log3 temperature and $-13^{\circ}C$ at Log5 temperature in viscosity. We could verify good alkali resistant property of the AR-glass fiber with SEM after dipping in alkali solution for 48~72 hours, and also high tensile strength, 1.7 times compare with E-glass fiber at 48 hours and 2.2 times at 72 hours. We conclude that this AR-glass fiber can be widely used as general alkali resistant glass fiber because of easy manufacturing condition and good properties even though it has low zirconia contents.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.190-198
• /
• 1983

To examine the possibility of enhancing activity of foliar applied herbicides by spray methods and additives, field experiments were conducted to evaluate the effects of surfactant, spray volume, and additions of ammonium sulfate or potassium chloride to glyphosate on toxicity to Digitaria sanguinalis or Artemisia princeps. Glyphosate toxicity increased as spray volume was decreased from 120 1/10a to 40 and 80 1/10a. Additions of surfactant in the spray solution increased toxicity of glyphosate to D. sanguinalis and usually more pronounced effect was obtained at glyphosate 30.5g a.i./10a. Additions of 1 and 5% (w/v) ammonium sulfate to glyphosate increased toxicity to A. princeps at glyphosate 30.5 and 61.5g a.i./10a. 10% ammonium slufate, however, had no effect or were antagonistic. Additions of potassium chloride at 1,2 and 3% (w/v) were also very effective to increase herbicidal activity to A. princeps at glyphosate at 30.5 and 61.0g a.i/10a. These results suggest that the practices for enhancement of herbicidal activity by improvement of spray method and additions of ammonium sulfate or potassium chloride to glyphosate can be employed to use lower herbicide levels while giving the same degree of weed control in orchards and non-crop lands.