As its high functional properties to be used as medicine or food, the cultivation of Agaricus mushroom has been expanded and iぉ commercialization required better storage methods that can extend its functional and nutritional value for longer period. We selected drying as the most plausible method to meet such requirement, and several drying conditions were investigated to locate the optimum drying condition that can be used to keep the quality of mushroom. Drying temperature of 50$^{\circ}C$, 60$^{\circ}C$, 100$^{\circ}C$ were selected to trace the drying time required to achieve the moisture content of mushrooms less than 10%. The drying temperature at 50$^{\circ}C$ required 29 hrs of drying time, while 100$^{\circ}C$ required only 10 hrs of drying tune. However, their quality characteristics on the following categories, on the degree of browning and color were investigated to find the optimum drying condition. In addition, sensory evaluation was conducted to evaluate the quality of dried mushrooms produced by each drying condition. The browning of the mushroom was evidently increased as the higher drying temperature was used and 50$^{\circ}C$ drying produced the most desirable quality of all in pileus or stipe. The aeon of browning intensified by drying temperature was comparable to the result of whiteness index value, which resulted lower L values as drying temperature increased. and the 50$^{\circ}C$ drying resulted the most highest L values among all drying samples. As the browning and whiteness results implied, the sensory evaluation result gathered from the present research indicated that the 50$^{\circ}C$ drying was the most favorable drying condition by scoring the most highest average scores on flavors, color, appearance, and overall acceptability conducted by the 10 evaluation panels.
This study was carried out to investigate the influence of chemical type and its retention in the fire-retardant treated plywoods on the static bending strength, a property peculiar to plywood. Being soaked in 20% aqueous solution of $(NH_4)_2SO_4$, $NH_4H_2PO_4$, $(NH_4)_2HPO_4$. Borax-Boric acid and Minalith for 3 to 12 hours at three-hour intervals and redried at $120^{\circ}C$ in hot press, the treated plywoods were put to static bending test. The values of chemical treated plywoods in Stress at proportional limit, Modulus of elasticity, Modulus of rupture and Work per unit volume to proportional limit were widely higher than those of water treated plywoods(control) and Borax-Boric acid treatment showed the highest value in the four mechanical data. And the bending strength of fire-retardant treated plywoods increased with the extension of soaking time or the increase of chemical retention in themselves. Borix-Boric acid was the desirable fire-retardant for thin plywood in view of mechanical strength and soaking defects in this study.
Journal of the Korean Recycled Construction Resources Institute
/
v.2
no.4
/
pp.307-313
/
2014
Recent interest in the increased structural performance and durability evaluation of this concrete structure in a salt damage environment is increasing. The most secure and reliable method of accelerated corrosion test is a method to carry out the rebar corrosion monitoring can be exposed directly to the marine test site exposure. However, long-term exposure testinghas the disadvantage that a long period is necessary. So, a lot of research on RC of salt damage environment have beenpromoted as alternatives to replace this. However, accelerated corrosion test, in the short term only is appropriate and is but an accelerated test method to evaluate the critical chlorine concentration, there is a difficult problem that you still get the answer. It is one of the correlation problems accelerated test correspond to a certain period of exposure environment. Therefore, in this study, to clarify the differences rebar corrosion beginning, through the actual corrosion accelerated test in corrosion time and laboratory test chamber of the structure of the marine environment results in both environments, it is an object of correlation coefficient derived.
Proceedings of the Korean Society of Dyers and Finishers Conference
/
2012.03a
/
pp.93-93
/
2012
섬유산업은 그 제조 스트림이 높은 오염 부하와 에너지 다소비를 특징으로 하여 환경규제에 따라 기존 시장의 위축 가능성이 상존하고 있다. 특히 섬유산업의 주요 스트림 중의 하나인 염색가공 공정은 섬유에서 불순물을 제거하고 심미한 색상과 사용 목적에 적합한 성능을 부여하는 단계로 섬유제조 공정에서 가장 높은 부가가치를 부여하는 단계이나 고온의 물과 다양한 화공약품을 많이 사용하고 그 처리온도가 비교적 높아($100^{\circ}C$ 이상) 대표적인 폐수 발생 공정이자 에너지 다소비 공정이다. 섬유의 염색 방법 중 반연속방법인 CPB(Cold Pad Batch)염색은 반응성 염료와 알칼리의 혼합액으로 구성된 염액에 원단을 패딩한 후 상온에서 수 시간 배칭하고 수세 및 후처리하여 염색하는 방법으로 작업공정관리, 설비관리가 간편하고 에너지소비량 절감, 높은 생산성의 장점이 있다. CPB염색법은 주로 직물에 적용되어 보편화 되었으며, 작업공정 중 장력의 영향을 많이 받는 니트 소재에 적용되는 사례는 드물다. 직물류의 CPB 염색가공법은 대구 경북을 중심으로 연구진행이 활발히 이루어지고 있어 국내 100대 정도의 CPB 관련 장비가 직물제품에 한정되어 가동되고 있는 반면, 니트 CPB 관련 염색 가공 업체는 1곳에 불과한 실정이나 니트류에 대한 지속적인 수요 증가를 고려하면 니트 소재에 대한 CPB염색 적용은 시의적절한 필수요소라고 판단된다. 니트 소재에 대한 CPB염색가공 적용 시 나타나는 문제점은 작업원단의 변부 말림현상 발생, 전폭 상태에서의 색상차이인 listing현상, 원단의 첫도입부분과 끝부분의 색상차이인 tailing현상이며, 반복되는 작업 시 염색재현성을 확보하는 것으로 나타난다. 본 연구에서는 CPB염색 시 CPB Head 장치의 Padding 방식 즉, trough와 Nip type에 따른 염색 시 알칼리와 염료 투입에 따른 염색 재현성(Build up, Ending, 알칼리 안정성)을 비교해 보았으며, 이에 따른 염색제품의 물성 및 견뢰도를 확인하여 보다 효율적인 방식을 선별하였다.
The isoflavone distributions of soy samples treated with soaking, oven-drying, and almond additions were determined by high performance liquid chromatography (HPLC). Oven-drying was performed to increase the amount of ${\beta}-glucoside$ isoflavones, and almonds were added to convert the ${\beta}-glucosides$ into their corresponding aglycones. Oven-drying at $100^{\circ}C$ for 4 hr significantly increased ${\beta}-glucoside$ levels and decreased $malonyl-{\beta}-glucosides$, while almond additions of 2.5% and 5.0% (w/w) significantly increased aglycone contents (p<0.05) for samples with 12 hr of drying. The rate of increase for genistein from genistin was faster than that of daidzein from daidzin with almond additions. The ${\beta}-glucosidase$ activity in the 5.0% added almond soybean samples was significantly higher than in the samples without added almond (p<0.05). The aglycone content increased from 1.62% in the raw soybeans to 61.55% in the 2.5% added almond soybean samples for 12 hr of incubation. The information from this study could be used to increase the isoflavone aglycone contents of soybeans by using natural products such as almonds, without organic solvent additions or microorganism fermentation.
This study assessed development in vitro of pronuclear(PN) stage embryos cryopreserved by the method of either vitrification or slow freezing, by using of different cryoprotectants, and equilibration and cooling rate, in rabbit. Ethyleneglycol- ficoll- sucrose(EFS) or ethyleneglycol- polyvinylpyrrolidone - galactose- (EPG-I) for vitrification, and EPG- II for slow freezing as cryoprotectant were used. The pronuclear embryos were exposed to EFS for 0 to 5 min and diluted with D-PBS and/or pre-dilution with 0.5 M sucrose. To examine the viability of frozen-thawed embryos, PN embryos were co-cultured with bovine oviductal epitherial cell(BOEC) for 5 days to hatching blastocyst stage in 39 $^{\circ}C$ 5% $CO_2$incubator. The results obtained were as follows: The dilution with 0.5 M sucrose and D-PBS after the exposure to EFS for 1.0 min resulted in no significant(P<0.05) decrease in the development of PN embryos to hatching blastocyst(72.0%), compared with controls. The development of PN embryos cryopreserved to hatching blastocyst was not significantly (P<0.05) different between EFS for 1.0 min(72.0%), EPG-I for 1.0 min(72.0%) and EPG-II for 30 min(66. 7%). The post-thaw development of PN embryos to hatching blastocyst was similarly very low as 6.1% and 11.5% in vitrification with EFS and slow freezing with EPG-II, respectively. The incidence of post-thaw zona-crack in PN embryos cryopreserved by slow freezing with plunging to liquid nitrogen at -35$^{\circ}C$ was signicantly(P<0.05) higher(25.0%), compared with -85$^{\circ}C$ (1.9%). These results indicated that the rabbit PN embryos could be cryopreserved with either vitrification or slow freezing procedure, and frozen PN embryos could be successfully developed in vitro to haching blastocyst. but the post-thaw development of cryopreserved PN embryos was still very low under the present conditions.
This is to study the effects of various pretreatment methods of agricultural residue, corn stover, and to compare the feature and pros and cons of each method including dilute sulfuric acid (DSA), soaking in aqueous ammonia (SAA), and ammonia recycle percolation (ARP). In order to convert corn stover to ethanol, various pretreatments followed by simultaneous saccharification and co-fermentation (SSCF) were tested and evaluated in terms of ethanol yield. With 3%, w/w of glucan loading using ARP-, DSA-, and SAA-treated solids, SSCFs using recombinant E. coli strain (ATCC$^{(R)}$ 55124) with commercial enzymes (15 FPU of Spezyme CP/g-glucan and 30 CBU/g-glucan enzyme loading) were tested. In the SSCF tests, 87, 90, and 78% of theoretical maximum ethanol yield were observed using ARP-, DSA-, and SAA-treated solids, respectively, which were 69, 58, and 74% on the basis of total carbohydrates (glucan + xylan) in the untreated corn stover. Ethanol yield of SAA-treated solid was higher than those of ARP- and DSA-treated solids. In addition, SSCF test using treated solids plus pretreated hydrolysate indicated that the DSA-treated hydrolysate showed the strongest inhibition effect on the KO11 strain, whereas the ARP-treated hydrolysate was found to have the second strongest inhibition effect. Bioconversion scheme using SAA pretreatment and SSCF can make the downstream process simple, which is suggested to produce ethanol economically because utilization of hemicellulose in the hydrolysate is not necessary.
Soybeans released proteins when immersed in water at $50{\sim}60^{\sim}C$. We investigated the changes in the characteristics of soybean when soaked in water at different temperatures and studied the electrophoretic properties of soy proteins in recommended Korean soybean varieties after heat treatment. Soybean seeds were heated in soaking water at temperatures of 30, 40, 50, 60, $70^{\circ}C$ for 90 min, and also from 10 to 150min at $60^{\circ}C$. The pH value of the water decreased with heating time at $60^{\circ}C$, and the amount of soluble solids increased with temperature and heating time. The protein concentration of the solution increased with temperature and time. From SDS-PAGE of the proteins in soaking water, we detected two new bands of 16 kDa- and 31 kDa-proteins from the Korean soybean varieties on heat treatment.
For examination, amaranth was first dried its surface after sufficient soaking in water. Dried amaranth was roasted when the moisture contents reached 30∼50%, its nasty smell disappeared and its color turned to yellow and it was puffed. Pretreated amaranth was added to biscuit for the improvement of apparence and merchandise value. The maximum expansion was reported at the moisture percentage of 130∼160% according to the examination of expansion and moisture percentage. In order to compare gelatinization of different processing, three different amaranth were prepared as follows ; Raw amaranth, steamed/dried amaranth, and roasted amaranth. The degree of gelatinization was increased as the percentage of moisture was increased and the degree of gelatinization of roasted amaranth was higher than the one of steamed/dried amaranth, their moisture contents were 62.10% and 57.59%, respectively In addition, the hardness($\times$10$\^$5/dyn/㎠) of roasted amaranth was showed lower values than that of steamed amaranth and raw amaranth were showed the large values. After examining biscuits containing each amaranth, raw amaranth had problem with nasty smell and bad texture, and streamed/dried amaranth were able to remove viscosity but turned brown. Biscuits containing roasted amaranth had good smell and texture, and besides the color of biscuits became bright because roasted amaranth turned white. Biscuits tasted best when it contained 5% of roasted amaranth. The rancidity of biscuits with 5% roasted amaranth were proceeded slowly while roasted amaranth itself had high acid value and peroxide value. For the safety from oxidation, it was fairly safe for about 6 months.
By using effective sanitizers, early block for transmission of pathogens is the effective way to prevent epidermic outbreaks. Here we developed a chlorine oxide bubbling type of sanitizing tablets and evaluated the disinfectant and sanitization effects. The sanitizers showed 99.999% of sanitization effect for Escherichia coli ATCC 10536 and Staphylococcus aureus ATCC 6538 strains for 5 min±10 sec on 20±1℃ in clean condition by dilution-neutralization method. It reduced more than 5 log10 cfu/ml of a legal permission standard of colony reduction. When a few used socks and underwear soaked for one hour in the 0.1% of the sanitizing tablets, no microorganisms were grown on CHROMagar plates. However, on CHROMagar plates of the no sanitizing tablets treated control, about 6.5×104 cfu/ml of Staphylococcus sp., Klebsiella sp. and Enterococus sp. were grown. Furthermore, the sanitizing tablets killed approximately 1.5x108 cfu/ml of E. coli BL21 in 5 minutes. Therefore, we concluded that the chlorine based bubbling type of sanitizing tablets satisfied the legal standard for the regulation of food and drug safety for disinfectants and sanitizers to pathogens and daily supplies.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.