• Title/Summary/Keyword: 침적입자

Search Result 97, Processing Time 0.026 seconds

Reduction of Nitrate-Nitrogen by Zero-valent Iron Nanoparticles Deposited on Aluminum yin Electrophoretic Method (전기영동법으로 알루미늄에 침적된 영가 철 나노입자에 의한 질산성 질소의 환원)

  • Ryoo, Won
    • Clean Technology
    • /
    • v.15 no.3
    • /
    • pp.194-201
    • /
    • 2009
  • Reductive reactivity of zero-valent iron nanoparticles was investigated for removal of nitrate-nitrogen which is considered one of the major water pollutants. To elucidate the difference in reactivity between preparation methods, iron nanoparticles were synthesized respectively from microemulsion and aqueous solution of ferric ions. Iron nanoparticles prepared from microemulsion were deposited on aluminum by electrophoretic method, and their reaction kinetics was compared to that of the same nanoparticles suspended in aqueous batch reaction. With an approximation of pseudo-first-order reaction, rate constants for suspended nanoparticles prepared from microemulsion and dilute aqueous solution were $3.49{\times}10^{-2}min^{-1}$ and $1.40{\times}10^{-2}min^{-1}$, respectively. Iron nanoparticles supported on aluminum showed ca. 30% less reaction rate in comparison with the identical nanoparticles in suspended state. However, supported nanoparticles showed the superior effectiveness in terms of nitrate-nitrogen removal per zero-valent iron input especially when excess amounts of nitrates were present. Iron nanoparticles deposited on aluminum maintained reductive reactivity for more than 3 hours, and produced nitrogen gas as a final reduction product of nitrate-nitrogen.

Characteristics of Air Dry Deposition in the Period of Yellow Sand in Kwangju Area (광주지역 황사기간중의 대기 건성침적량의 특성에 관한 연구)

  • 전의찬;김천두;노기환
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2002.11a
    • /
    • pp.129-130
    • /
    • 2002
  • 최근 황사는 지구온난화와 토양의 사막화 등에 의해 발원지가 계속 확대되고 발생빈도 역시 증가하고 있으며 서해안에 인접한 중국의 북동부 공업지역에서 방출되는 오염물질까지 황사에 실려와 심각한 국내의 오염 문제 및 국제 문제로 부각되고 있다. 이들 대기오염물질은 가스상과 입자상으로 구분할 수 있는데, 요즘 입자상 물질의 건성침적량에 관한 연구가 서서히 활기를 띄어가고 있다. 입자의 크기가 0.1-10$\mu\textrm{m}$에 달하면 장거리 이동이 가능하며, 시정악화는 물론 흑비를 내리고, 인체에는 기관지 질환을 유발하기도 한다. (중략)

  • PDF

Study of Atmospheric Dry Deposition Fluxes of Heavy Metals (대기 중 입자상 중금속의 건식 침적량에 관한 연구)

  • 윤희정;이승묵;김용표
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.111-112
    • /
    • 2001
  • 대기로부터 침적된 물질로 인해 토양오염과 수질오염 현상이 심화될 뿐만 아니라 환경 생태계도 영향을 받는다는 것이 밝혀지면서 대기 침적 현상에 대한 관심이 커지고 있다. 침적은 대기 중의 여러 미량 물질들이 환경계에 미치는 영향과 그들의 이동을 조절하는 중요한 기작 중 하나이다. 중금속은 가장 오래전부터 알려진 독성물질로서, 약 30가지 금속이 사람에게 독성을 발현하는 것으로 알려져 있고, 그 중 일부 중금속은 발암성을 가지고 있다. (중략)

  • PDF

20wt% $\textrm{Y}_{2}\textrm{O}_{3}$-$\textrm{ZrO}_{2}$ Powder Spraying by Induction Plasma (유도플라즈마에 의한 20wt% $\textrm{Y}_{2}\textrm{O}_{3}$-$\textrm{ZrO}_{2}$분말의 용융분사)

  • Jeong, In-Ha;Bae, Gi-Gwang
    • Korean Journal of Materials Research
    • /
    • v.8 no.8
    • /
    • pp.699-706
    • /
    • 1998
  • 현재까지 박막코팅 분야에 주로 이용해 오던 플라즈마 용융분사법을 이용하여 고밀도의 두꺼운 세라믹 침적물을 제조하였다. 용융점이 2910K인 ZrO2-20wt%Y2O3분말을 이용하여 최적조건에서 이론밀도의 약 97%의 침적물을 얻었다. 고밀도 침적에 영향을 미치는 변수는 챔버 내부압력, 플라즈마동력, 플라즈마 가스조성, 분사거리, 분말입자 크기 등이었으며, 침적밀도 및 침적된 splat의 형태는 분말의 용융정도 및 챔버 내부압력에 크게 좌우되었다. 높은 밀도으 침적물을 만들기 위해서는 분말을 완전히 용융시키는 것이 중요하며, 완전히 용융된 조건에서는 챔버 내부압력이 낮고 분말분사거리가 짧은 조건 즉, 분사되는 분말이 높은 모멘텀을 가질수록 침적물의 밀도가 증가함을 알 수 있었다. 실험에서 얻어진 결과는 ANOVA 통계방법으로 분석하여 단일변수의 영향뿐만 아니라 이들 변수가 서로 조합하여 밀도에 미치는 영향도 분석하였다.

  • PDF

Estimation of Dry Deposition Fluxes and Velocity for Particulate PAHs in Korea (입자상 PAHs의 건식 침적량과 건식 침적 속도 추정)

  • 이지이;배수야;이승묵;김용표
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.37-38
    • /
    • 2001
  • Polycyclic Aromatic Hydrocarbons(다환방향족 탄화수소류, 이하 PAHs)는 두 개 이상의 벤젠 고리로 구성되어 있는 반휘발성 유기물질로서 가스상과 입자상에 모두 존재한다. PAHs는 주로 불완전 연소에 의해서 생성되며, 주요 고정 오염원은 주거 난방, 코크 산업, 소각이고, 주요 이동오염원은 자동차 엔진이다. PAHs에는 강한 발암성 혹은 돌연변이원성을 가진 화합물들이 포함되어 있고, 주변 대기에 널리 분포되어 있을 가능성이 높기 때문에 일반 대중이 쉽게 노출될 수 있다. (중략)

  • PDF

Fluid Analysis of GGH Panel Elements considering Deposition Particles for Desulfurizing Equipments (침적 입자를 고려한 탈황설비용 GGH 판넬 요소의 유동해석)

  • Ryu, B.J.;Kim, J.H.;Kim, H.S.;Lee, K.S.;Koo, K.W.
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2009.04a
    • /
    • pp.601-605
    • /
    • 2009
  • The paper deals with the proper design of GGH(gas-gas heater) panel elements of desulfurization equipments in a thermoelectric power plant. When fossil fuels such as coal, petroleum et cetera are burnt to ashes, sulfur oxide compounds are produced, and calcareous sludges are deposited at GGH panel elements. In this case, operation of a power plant equipments is interrupted, and a tremendous economic loss comes into existence. One of the purposes of the paper is to find flow velocity distributions and regions of depositions when calcareous sludges pile up on the GGH panel elements through the fluid analysis. In the fluid analysis, flow velocity and position distributions of particles between GGH panel elements are demonstrated according to time variation for ammonia and calcium hydroxide particles.

  • PDF

Comparison of Evaluation Methodologies of Atmospheric Dry Deposition Flux (대기건식침적량 평가방법의 비교)

  • 정장표;이승훈;장남익
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.11a
    • /
    • pp.109-111
    • /
    • 2000
  • 지금까지 대기침적량의 산정에는 크게 대기중의 오염물질 농도와 침적속도를 이용하여 추정하는 방법 (atmospheric flux methods)과 대리표면을 이용하여 건성침적량을 직접 측정하는 표면분석 방법(surface analysis methods)이 주로 이용되고 있다. 전자는 대기중 오염물질 농도를 관측ㆍ분석함으로써 eddy correlation, aerodynamic gradient methods 등의 미기상학적인 방법이 여기에 해당되며 균일하지 못한 표면이나 중력침강이 주가되는 조대입자에 대해 사용이 제한되는 단점이 있다. 이에 반해 대체표면을 사용하는 방법은 일반적으로 시료채취 및 분석과정에 있어서 통제가 용이하기 때문에 현재 광범위하게 널리 사용되고 있다. (중략)

  • PDF

Analysis of Process Variables on Plasma Deposition by Experimental Design (실험계획법에 의한 플라즈마침적 공정변수 영향분석)

  • 정인하;박희성;이철용;강권호;문제선
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 1999.05a
    • /
    • pp.57-57
    • /
    • 1999
  • 핵연료 펠렛제조공정의 단순화를 위하여 분말을 플라즈마로 용융시킨 후 이를 펠렛몰더에 직접 침적시키는 방법으로 핵연료를 제조하고자 하였다. 침적물의 밀도에 미치는 영향을 관찰하기 위하여 쉬스가스 조성, 플라즈마 동력, 챔버내부압력 및 분말 공급량, 입자크기, 분사관 위치, 분사거리 및 쉬스가스조성 등을 변수로 하였다$^{1)}$ . 실험으로 얻어진 결과는 ANOVA(Analysis of Variance)의 통계적 방법으로 각각의 인자가 밀도에 미치는 영향의 크기뿐만 아니라, 두 가지 이상의 인자가 조합되어 나타나는 영향에 대해서도 분석하였다.

  • PDF

Analysis of microstructural evolutions during advanced ceramics processing: II. Vibratory deposition of monodisperse particulate system (세라믹 제조시 미세구조 변화의 해석:II. 단분산 입자계의 진동성형)

  • Kim, Ho-Yeon;Kim, Hern
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.8 no.4
    • /
    • pp.605-611
    • /
    • 1998
  • A computer experimental model for analyzing the microstructures and properties of vibratory deposited power compacts was developed. The effects of some significant variables such as amplitude, frequency, cycle, etc. on the change of diffraction patterns and packing densities of the deposited powder compacts were examined. In addition, the condition of phase transition from non-crystalline phase to crystalline one was determined. Data obtained from the present method quite well fitted the empirical correlations for real experimental data. In conclusion, the present model is so useful to investigate the densification and ordering of vibratory compaction.

  • PDF