• Korean journal of applied entomology
• /
• v.7
• /
• pp.77-81
• /
• 1969

The effects of submerged method. Zentmyer's drench method. pot test and field test with materials such as Carbamisol (ammonium methyldithiocarbamic acid $30\%$), NCS (ammonium N-methyldithiocarbamate$50\%$, Similuton(ethyl phenethynylmeroury $3.3\%$), Soill(N-ethylmercuric p-toluensulfonanilide $4\%$, Captan (N-trichloromethylthio-1, 2, 3, 6-tetra-hydrophthalimide $80\%$), Difolatan(N-tetrachloroet-hylthio 4cyelohexeno-1,2-dicarboximide $80\%$, Grand(2, 3-dibromepropionitryl $20\%$, trichloronitroethylene $20\%$) and Calcium hydroxide upon occurrence of Fusarium wilt of cucumber were studied. The results are summarized as follows. 1. According to submerged method, all the compounds tested were highly inhibitory to mycelial growth of Fusarium oxysporum f. cucumerinum except calcium hydroxide. But several compounds were no inhibitory to the causal fungus except Grand and Similuton, with Zentmyer's drench method. 2. Grand was the most effective fungicide for the control of cocumber Fusarium wilt in the pot test, and followed by Similuton and calcium hydroxide. The population of Fusarium oxysporm was markedly reduced when soil was treat with Grand compared with other chemicals. 3. Fungicidal effects upon occurrence of Fusarium wilt of cucumber under the field experiment varied with the fungicides. Of the fungicides tested. Grand gave the best control, and followed by Difolatan.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.121-121
• /
• 2016

치아는 인체중에서도 혹한 환경에서 부분으로 높은 하중과 타액과 같은 강 부식성 매체로 그 환경이 상상을 초월한다. 즉 반복적으로 가해지는 하중(응력)과 침식을 유발하는 타액과 음식물 등이다. 따라서 치아가 쉽게 파괴되거나 썩는 현상이 나타나게 된다. 이렇게 사용되다가 치아의 역할을 다하게 되면 인공치아를 사용하게 되는데 그 재료가 바로 타이타늄(Ti)이다. 생체매식재로 사용되는 Ti는 반응성이 높아 산소와 쉽게 결합하여 표면에 TiO, $TiO_2$, 및 $Ti_2O_3$와 같은 산화피막을 표면에 형성함으로써 뛰어난 부식저항성과 생체적합성을 가지며 생체에 독성이 없고 탄성계수가 골과 비슷하여 골과 임플란트 경계면에서 응력분산에 유리한 성질 등 물리적, 기계적 성질이 뛰어나 외과용 임플란트 재료로 가장 좋은 재료이다. 금속 임플란트의 생체적합도는 임플란트 재료 자체보다는 생체 내 산화막이 화학적으로 불안정할 때 부식이 발생하게 되고 그 결과 금속이온이 주위로 유리되어 조직반응을 일으키므로 금속의 표면을 덮고 있는 산화막에 의해 좌우된다. Ti는 생체불활성재료로서 매식재료로 사용할 경우 뼈와 잘 융합되는 골유착을 나타내나 골과 화학적결합은 하지 않고 골형성을 적극적으로 유도하지 못함으로 환자의 치유기간이 길어지게 된다. 이러한 이유로 골조직내 임플란트의 접합을 개선하기위한 연구가 이루어져 골과의 결합을 높이기 위해 골유착을 일으키는 Ti에 골성장을 유도하는 뼈성분인 하이드록시 아파타이트(HA)라는 물질을 플라즈마 코팅법을 사용하던가 아니면 Hanks' solution내에서 침적 후 HA도금을 하는 방법 등으로 처리하고 있다. 그러나 플라즈마 코팅법은 고온에서 처리를 행하고 Hanks' solution내에 침적할 경우 Ti표면에 밀착도가 저하되거나 합금의 상변화 등으로 인하여 표면처리 과정 중에서 내식성이 크게 감소될 수 있다. 이러한 여러 가지 코팅법을 통하여 골 유착을 증진시키기 위한 연구는 계속되고 있지만 임상적으로 사용 후 문제가 단시일에 발생되는 것도 아니고 수년이 지나야 나타나게 된다. 이러한 방법으로 코팅을 하게 되면 골과 잘 유착이 되어 자연차아와 같은 기능을 하게 된다. 따라서 이러한 문제를 최소화하는 방법이 나노구조를 표면에 형성시켜 골유착을 쉽게 함으로써 이를 개선할 수 있을 것으로 생각되어 본 강의에서는 임플란트의 문제와 사용되는 재료에 대하여 고찰하여 자연치아를 대체 할 수 있는지 알아보았다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.57.2-57.2
• /
• 2012

산소 이온 전도성 세라믹을 이용한 고체 산화물 연료전지의 전극은 원활한 전기화학반응을 위해, 이온 전도도, 전자 전도도 및 전기화학적 활성을 동시에 가지고 있어야 한다. 이를 위해 복합체 전극을 사용하며, 특히 음극의 경우 니켈(Nickel)과 Yttria-stabilized zirconia (YSZ)로 이루어진 복합체 전극을 혼합 및 소결을 통해 제조하여 사용하였다. 하지만, 니켈의 경우 탄화 수소 연료에서의 탄소 침적 문제와 열악한 산화환원 안정성(redox stability)등의 문제점을 가지고 있다. 따라서 니켈대신 전도성 세라믹을 사용한 세라믹 복합체 음극 개발이 활발히 이루어지고 있으며, 그 중 침투법(infiltration method)을 이용한 복합체 전극 제조 방법을 소개한다. 실제로 니켈 금속과 유사한 높은 전기 전도도를 갖는 Sr-doped Lanthanum Vanadate (LSV)을 이용해, YSZ-LSV 복합체 전극을 침투법을 이용해 제조하고, 소량의 촉매을 첨가하여, 이온전도도, 전자 전도도 및 촉매 활성을 갖는 복합체 음극을 제조하였다. 이 복합체 음극의 탄화수소에서의 연료전지 성능 및 redox stability을 측정하였다.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.277-285
• /
• 1998

Antifungal activity on major seedborne diasease of crops was screened by the treatment of the extracts from 50 medicinal plants in vitro and in vivo. The extracts of garlic and taxus, Rheum undulatum, Achiranthes japonica, Glycyrrhiza uralensis, Oenothera lamar kiana treated with the blotting filter paper and water agar methods inhibited the growth of Pyricularia oryzae, Alternaria sesamicola, Colletotrichum gloeosporioides, and Alternaria brassicicola among the tested plants. Antifungal activities on infected seeds by soaking methods were shown even at the dilution of the extracts by 10 times. The activity was the highest in soaking seeds at $25^{\circ}C$ for 24 hours. The effect of plant extract on seed germination was not significant as compared with untreated seed. However, early growth of seedling was increased by the treatment of extracts. The extract of taxus slightly inhibited the seed germination of radish and chinese cabbage but those of Achirunthes japonica, Glycyrrhiza uralensis and Oenthfera lamarkiana showed severe damage on the seed germination and early growth of seedling.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.133-138
• /
• 2021

In this study, Niacinamide (NI) was loaded into solid lipid nanoparticles (SLNs) and skin permeability was evaluated to improve skin permeability of NI, which was a skin whitening substance. NI was able to effectively load within SLN with a double-melting emulsification method, producing stable particles with average particle sizes of 263.30 to 436.93 nm and a zeta potential of -34.77 to -57.60 mV. Artificial skin tissue (SkinEthic^TM RHE) derived from skin keratinocytes derived from human epidermal tissue was used for the skin permeation study of NI. Skin transmittance and deposition experiments of NI confirmed that all SLN formulations improved skin transmittance and deposition rates of NI, approximately 5.4 ~ 7.6 and 9.5 ~ 20.8 improvement over SLN applications. Therefore, SLN manufactured in this study have shown sufficient results to improve the skin permeability of the functional whitening substance, NI.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1078-1086
• /
• 1996

The peroxo-polytungstic acid was formed by the direct reaction of tungsten powder with the hydrogen peroxide solution. Peroxo-polytungstic powder were prepared by rotary evaporator using the fabricated on to ITO coated glass as substrate by dip-coating method using $2g/10mL(W-IPA/H_2O)$ sol solution. A substrate was dipped into the sol solution and after a meniscus had settled, the substrate was withdrawn at a constant rate of the 3mm/sec. Thicker layer could be built up by repeated dipping/post-treatment 15 times cycles. The layers dried at the temperature of $65{\sim}70^{\circ}C$ during the withdrawn process, and then tungsten oxides thin film was formed by final heating treatment at the temperature of $230{\sim}240^{\circ}C$ for 30min. A linear rotation between the thickness of thin film and the number of dipping/post-treatment cycles for tungsten oxides thin films made by dip-coating was found. The thickness of thin film had $60{\AA}$ after one dipping. From the patterns of XRD, the structure of tungsten oxides thin film identified as amorphous one and from the photographs of SEM, the defects and the moderate cracks were observed on the tungsten oxides thin film, but the homogeneous surface of thin films were mostly appeared. The electrochemical characteristic of the $ITO/WO_3$ thin film electrode were confirmed by the cyclic voltammetry and the cathodic Tafel polaization method. The coloring bleaching processes were clearly repeated up to several hundreds cycles by multiple cyclic voltammetry, but the dissolved phenomenon of thin film revealed in $H_2SO_4$ solution was observed due to the decrease of the current densities. The diffusion coefficient was calculated from irreversible Randles-Sevick equation from the data obtained by the cyclic voltammetry with various scan rates.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.242-242
• /
• 2004

원자력발전소의 운전과정에서 계획적 혹은 비계획적으로 방출되는 미량의 입자상 방사성 물질들은 대부분 원전 부지내 토양에 침적되게 된다. 이러한 과정 속에서 오염토양이 발생하게 되면 수거되어 단순 격리관리하고 있는 실정이지만 앞으로 원전의 해체과정 등으로 인한 오염토양이 상당량 발생할 것으로 예상되기 때문에 적절한 제염을 통하여 폐기물량을 최소화시킬 필요가 있다. 이를 위해 오염토양 제염공정으로 물을 이용한 토양세척법을 선정하여 제염장치를 제작하였으며 실증시험을 수행하였다.(중략)

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.2
• /
• pp.59-69
• /
• 1993

Bending fracture strength test and impact strength test were made for VC coated die steels treated by immersing in molten borax bath and for hardened steels which were quenched and tempered, in order to clarify the effect of VC coating at $1000^{\circ}C$. The material used in this investigation was representative cold and hot work die steels STD11, STD61. The results obtained are as follows. 1) The bending fracture strength of VC coated die steel (STD11, STD61) was lessened with increasing the thickness of the VC coated layer. 2) With increasing the immersing time (imcreasing the thickness of the VC coated layer) the maximum hardness was obtained at 480 minutes holding, after that holding time hardness was decreased. 3) The impact strength of the VC coated die steel was not decreased. In the casse of STD11, it was higher than that of the quenched condition especially at low tempering temperature, and vice versa at high tempering temperature. However in the case of STD61 shows the result to the contrary.

• Korean journal of applied entomology
• /
• v.33 no.4
• /
• pp.281-285
• /
• 1994

This study was conducted to establish a nce insect pest control system, ~ es.ys tematic application of insecticides using carbohran and buproiezin, in Korea. The effects oi various dates of application and rates of buprofezin (25% WP) after carbofuran (3G) soil incorpombon in late May on the pop~~lation densities of the brown planthoppa (BPH) immigrating in July were investigated Appropriate application tune of buprofezin for the BPH that had evaded insecticidal effect of 5011 incorporated carbofuran was late July-early August. Application rate of buprofezln at 7.0g a.i/lOa was enough to suppress the BPH density. Buprofezin treatment after carbofumn soil incorporation could also suppress the whlte backed planthopper population but did not affect the densities oi the paddy rice spiders. Considering the charactenstics of occurring patterns of the nce insect pests in Korea. buprofezin treatment m late July or early August after carbofuran soil incorporation in late May can be a useful application system of ir~sectic~deins controlling early season Insect pests and migmtoly planthoppers on rice.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.281-289
• /
• 2006

Topical fluoride application for children is a widely performed procedure in the field of Pediatric Dentistry for its dental caries prevention effects However, it is recently recognized as having some unwanted effects on several esthetic restorative materials, the author immersed glass ionomer cement, compomer and composite resin specimens in APF gel and measured the surface roughness and also, examined the specimens under the scanning eletron microscope. The followings are the results: 1. In the specimens of glass ionomer cement and compomer, APF gel 4 minute immersion group and pH cycling group show statistically significant increased surface roughness than artificial saliva immersion group (p<0.01). 2. There was no statistically significant surface roughness for composite resin in all group (p>0.05). 3. When the specimens were examined under scanning electron microscope, the surface change were in the order of glass ionomer cement, compomer, composite resin and also in the order of pH cycling group, APF gel 4 minutes immersion group, artificial saliva immersion group.