• Water for future
• /
• v.27 no.3
• /
• pp.115-121
• /
• 1994

Cohesie sediment movement in estuarine systems is strongly affected by the phenomena of aggregation and flocculation. Aggregation is the process where primary particles are clustered together in tightly-packed formations; flocculation is the process where aggregates and single particles are bonded together to form large particle groups of very low specific density. The size, shape and strength of the flocculants control the rate of deposition and the processes of pollutant exchange between suspended sediments and ambient water. In estuarine waters, suspended sediments above the lutocline form the mobile suspension zone while below the lutocline they form the stationary suspension zone. Suspended particles in the mobile zone are generally in a dispersed state and the controlling forces are the Brownian motion and the turbulent flow fluctuations. In the stationary suspension zone, the driving force is the gravity. This paper discusses the settling and particle flocculation characteristics under quiescient flow conditions. Particles are entering the study domain randomly. Particles in the mobile suspension zone are simulated by using the Smoluchowski's model. Flocs created in the mobil suspension zone are moving into the stationary suspension zone where viscosity and drag effects are important. Utilizing the concepts of the maximum Feret's diameter and the Minkowski's sausage logic, the fractal dimension of the flocs within the stationary suspension is estimated and then compared with results obtained by other studies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.475-475
• /
• 2023

직경 5 mm 이하의 미세플라스틱은 인류 활동에 의해 생산되어 하수처리장 처리수, 우수토구, 도로 분진 등 다양한 경로를 통해 하천에 유입되고 있다. 하천에 유입된 미세플라스틱은 하천흐름을 따라 하류로 이동하여 해양환경에까지 이른다. 미세플라스틱은 수체를 따라 이동할 뿐 아니라 수생생물에 의해 섭식되기도 하여 인체 위해성이 우려되는 상황이다. 특히 서울과 경기도의 주요 상수원인 팔당호는 북한강, 남한강, 경안천이 유입되어 형성되기 때문에 미세플라스틱의 유입에 따른 이송-분산 거동 평가가 중요한 영역이다. 본 연구에서는 준3차원 입자추적기법을 이용한 미세플라스틱 거동해석 모형, MPT-Q3D를 개발하였으며 팔당호 내 미세플라스틱의 거동 특성을 분석하였다. MPT-Q3D 모형은 2차원 흐름해석모형과 연계한 입자의 준3차원 거동해석을 위해 step-by-step computation method를 적용하였으며, 전단류에 의한 입자의 수평거동과 난류확산에 및 침강속도에 의한 연직거동 두 단계 계산과정에 따라 입자의 거동을 해석했다. 전단류는 2차원 흐름해석결과로부터 유속의 연직분포식을 적용하여 생성하였으며, 생성된 전단류에 의해 각 연직층 별 유속이 계산되고 𝚫t 이후 입자의 종, 횡 방향 이동거리를 계산한다. 또한 난류확산에 의한 무작위적 거동 계산을 위해 Gaussian 분포를 따른 난수 생성을 통해 무작위적 거동을 계산했다. 각 연직층에 위치한 미세플라스틱 입자의 종, 횡 방향 거동을 계산한 후 입자의 연직거동을 계산한다. 입자의 연직 위치는 난류확산과 침강속도에 따라 계산되며 침강속도는 미세플라스틱의 밀도 및 직경에 따라 결정된다. 현장 샘플링 결과에 따라 팔당호로 유입되는 미세플라스틱은 폴리스틸렌(PS), 폴리에틸렌(PE), 폴리에스테르(Polyester)가 있으므로, 세 종류의 미세플라스틱을 동시에 주입하여 팔당호 내 거동을 분석했다. 남한강, 북한강, 경안천의 유량 차이로 인해 팔당호로 유입되는 미세플라스틱은 대체로 남한강과 북한강의 흐름특성에 영향을 받았다. 경안천의 경우 유량이 낮아 팔당호로 유입되지 못하고 좌안을 따라 하류로 이동됐다. 남한강과 북한강에서 유입된 미세플라스틱은 주로 팔당호 내 소내섬을 거쳐 팔당댐 쪽으로 이동했다. 또한 팔당댐 인근에서는 PP, PE, Polyester 순으로 많은 양이 유입되는 결과가 나타났다.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.1
• /
• pp.53-61
• /
• 2006

Soil liquefaction occurs by complex dynamic interaction between soil particles and pore fluid. Therefore, experimental researches have been widely performed to analyze liquefaction phenomena. In this research, centrifuge tests were performed to analyze the liquefaction behavior of horizontal sand ground. Centrifugal acceleration was 40g and the thickness of model ground was 25cm, which simulates 10m thickness in prototype scale. Viscous fluid was used as pore fluid to remove the time scaling difference between dissipation and dynamic shaking. Test results showed that the dissipation of excess pore pressure is the combined behavior of solidification and consolidation. In addition, the solidification rate, the ground acceleration amplitude, and the dynamic permeability during solidification were influenced by the confining pressure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5C
• /
• pp.217-228
• /
• 2009

In case of application of electrophoresis method for leakage restoration of waste impoundment, main points of consideration were to evaluate the mobility of clay particles by electrophoretic force and capacity of leakage repair in leachate electrolyte system contained with various chemical species. However, the flocculation phenomena of clay particles induced by electrochemical interaction between various chemical species and clay particles would cause the big problems in electrophoresis method. Therefore, a series of laboratory tests such as one-dimensional electrophoresis and gravitational experiments were carried out in order to identify the specific chemical species affected flocculation of clay particles and the range of chemical concentration in leachate. In addition, the characteristics of clay particle behavior with chemical species and concentration range in leachate were analized using the concept of the settling velocity, zeta potential, and electrophoretic velocity.

• Clinical and Experimental Pediatrics
• /
• v.46 no.8
• /
• pp.758-762
• /
• 2003

Purpose : Our examination was designed to determine the diagnostic properties of the cutoff point for the prediction of bacteremia in febrile children less than 3 years of age. Cutoff point is the value that simultaneously maximizes both sensitivity and specificity. Methods : We conducted a retrospective study of febrile children, less than 3 years of age, who clinically have no identifiable source of fever. Peripheral blood leukocyte count(WBC), absolute neutrophil count(ANC), erythrocyte sedimentation rate(ESR) and C-reactive protein(CRP) were measured at the same time. All patients received blood culture, urine culture and/or CSF culture. Bacterial infection was defined as single pathogen isolated from the CSF or blood or a urinary tract infection (UTI). Patients were dichotomized into two groups : those with bacterial infection and no bacterial infection. We analyzed the characteristics of the children in the two groups. Results : Seventy-one patients(44 males; 27 females) were enrolled in the study. Twenty patients (28%) had a serious bacterial infection(twelve urinary tract infection, five bacteremia, three meningitis) and fifty-one(72%) had no serious bacterial infection. WBC, ESR and CRP were significantly different between the two groups(P<0.05). The cutoff point of WBC, ESR and CRP were $20,000/mm^3$, 30 mm/hr and 3.0 mg/dL, respectively. The sensitivity and specificity of each cutoff point were WBC(75%, 75%), ESR(79%, 68%) and CRP(83%, 77%), respectively. Conclusion : These data show the ability of predictors to identify febrile children less than 3 years of age with bacterial infection. Febrile children who reach the cutoff point must be treated intensively and those who do not reach the cutoff point can be carefully managed without administering antimicrobial agents.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.140-148
• /
• 2017

The effectiveness of the first flush treatment system using settling process was evaluated to reduce urban nonpoint source pollutant loads to surface water during storm events. A pilot scale system was constructed and tested in the field and surface runoff samples were collected automatically according to pre-defined conditions. Nine rainfall events were tested and average removal efficiencies of TSS (Total Suspended Solid), TP (Total Phosphorus) and TN (Total Nitrogen) were evaluated as 87.4%, 75.3%, and 43.6%, respectively. Concentration and removal efficiency of pollutants were found to be affected by an amount of rainfall and rainfall intensities of the respective events. This seemed to be caused by the greater particulate fractions of first flushed samples than the samples collected in later time periods during the same rainfall events. The study showed that it is possible to remove a significant portion of the nonpoint source pollutant loads in initial rainfall runoff by using a simple settling process for TSS and TP without requiring additional power or chemicals.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.62-70
• /
• 2010

As the demand for paper continues to grow and the importance of recycled paper, white ledgar(WL) and old newspaper pulp(ONP), continuously increase. In addition, usage of recycled paper is essential in terms of forest conservation and environmental protection issues. However, optical and mechanical properties of recycled paper have some drawbacks than regular paper's properties that is indispensable. In order to complement these problems of recycled paper, precipitated calcium carbonate (PCC) was synthesized by the In-situ process with a recycled pulp. Depending on the size of PCC is divided into 2 types, $0.01{\mu}m{\sim}0.09{\mu}m$ colloid type ultra-fine particle and $0.1{\mu}m{\sim}0.9{\mu}m$ cubic type particles. In this study, we analyze how the different shape and size of precipitated calcium carbonate affects in the optical and mechanical properties of the recycled paper used as a filler. Furthermore, we mixed with chemical pulp for overcome reduce of mechanical properties, without using other chemicals, when we use PCC as a filler. The results has the possibility to meet in GR excellent recycling certification mark, standard was proposed.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.99-106
• /
• 2015

To estimate the effects of suspended sediments flowing into the Saemangeum Reservoir on the extent of contamination of the reservoir, the suspended sediments were collected with sediment traps, which were installed from the upstream of the Mankyung and Dongjin Rivers to estuary of the reservoir, respectively, and the sedimentation rates and the chemical characteristics of suspended sediments were analyzed. The sedimentation rates in the Mankyung and Dongjin Rivers were ranged from 0.01~5.06 and $0.01{\sim}8.75kg/m^2/day$, respectively. Those were higher to the upstream of rivers, and were mainly affected by flood events. The concentrations of organic matters were from 3.3 to 9.6 times higher than those in the stream sediments and were higher after flood season, indicating the contaminants come from the non-point sources on the basin. The concentrations of total nitrogen and total phosphorus in the suspended sediments showed the same trend with the organic matters. These results indicate that the suspended sediments from the basin of the Mankyung and Dongjin Rivers are highly contaminated and the countermeasures to manage the sources of contamination on the basin are required to maintain the water quality of the Saemangeum Reservoir.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.423-427
• /
• 2013

This research was carried out to identify the characteristics of the wastewater from coke oven gas (COG) purification process of the coke plant, and derive optimal operating conditions for the treatment of wastewater. The coke plant wastewater contains highly concentrated $S^{-2}$ and $SCN^-$ that are harmful to microorganisms, and their concentrations were 6.8~11.2 mg/L and 190~320 mg/L, respectively. When the $S^{-2}$ ion concentration was lower than 10 mg/L, $SV_{30}$ of active sludge was 280~ 340 mL and the sludge sedimentation velocity was very fast. But, when the $S^{-2}$ ion concentration was higher than 15 mg/L, $SV_{30}$ of the active sludge was 560~680 mL and the sludge sedimentation velocity was very slow. Also when the $SCN^-$ ion concentration was lower than 300 mg/L, $SV_{30}$ of the active sludge was 245~320 mL and the sludge sedimentation velocity was very fast. But, when the $SCN^-$ ion concentration was higher than 400 mg/L, $SV_{30}$ of the active sludge was 470~ 567 mL and the sludge sedimentation velocity was slow. To treat the wastewater generated by COG purification process of the coke plant effectively and to maintain microorganism activities in good conditions, the ion concentration of $S^{-2}$ and $SCN^-$ should be lower than 15 mg/L and 400 mg/L, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water