• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.13-26
• /
• 2021

This study was conducted to identify various types of activities of payment contract for ecosystem services. As supporting services, 12 types of activities were derived: fallow, eco-friendly crop cultivation, shelter creation management, etc. As regulating services, 5 types of activities were derived: stream environment purification, creation and management of riparian vegetation, creation and management of forests for responding to climate change, etc. As cultural services, five types of activities were derived: creation and management of landscape forests, creation and management of ecological trails, managing ecosystem conservation, etc.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.19-25
• /
• 2022

In this study, tungsten carbide (WC) powder was prepared using a novel recycling process for hard metal sludge that does not use ammonium paratungstate. Instead of ammonia, acid was used to remove the sodium and crystallized tungstate, resulting in the formation of tungstic acid (H₂WO₄). The WC powder was successfully synthesized by the carbothermal reduction of tungstic acid through H₂O decomposition, reduction of WO₃ to W, and formation of WC. The carbon content and holding time at the carbothermal reduction temperature were optimized to remove free carbon from the WC powder. As a result, most of the free carbon in the WC powder prepared from sludge was removed, and the content of free carbon in the synthesized WC powder was lower than that in commercial WC powder. Moreover, the crystallite size of WC prepared from H₂WO₄ was much smaller than that of commercial micron-sized WC powder produced from APT. The small crystallite size of WC induces grain growth during the sintering of the WC-Co composite; thus, a WC-Co composite with large WC grains was fabricated using the WC powder prepared from H₂WO₄. The large WC grains affected the mechanical properties of the WC-Co composite. Further, due to the large grain size, the WC-Co composite fabricated from H₂WO₄ exhibited a higher toughness than that of the WC-Co composite prepared from commercial WC powder.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.1-12
• /
• 2021

MILD(Moderate or Intense Low-oxygen Dilution) combustion has attracted attention as the clean thermal energy technology due to the lower emissions of unburnt carbon and NO_x. MILD combustion aims to enlarge the combustion reaction zone using the spontaneous ignition phenomenon of the reactants. In this study, the ignition delay time of CH₄ according to the initial temperature of reactants and the addition of CO, H₂ was investigated using a numerical approach. Ignition delay time became shorter as the increases of initial temperature and H₂ addition. But, CO addition to the fuel increase the ignition delay time. In case of H₂ addition to the fuel, the ignition delay time decreased because the higher fraction of HO₂ promotes the decomposition of methyl radical(CH₃) and produce OH radical. However, in case of CO addition to the fuel, ignition delay time inceased because a high proportion of HCO consumes H radical. There was no significant effect of HCO on the reduction of ignition delay time. Also, the increase rates of NO emissions by the addition of CO and H₂ were approximately 7% and 1%, respectively. A high proportion of NCO affects the increase in NO production rate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.428-434
• /
• 2022

This study intends to develop an eco-friendly concrete panel mixed with biochars. Experiments about mechanical and thermal properties were conducted on porous biochar concrete, which has insulation and carbon-capture performance. The concrete has a mixing ratio of 0, 5, 10, and 15 % for biochar and a water-binder ratio of 0.35. The unit weight, porosity, and permeability were measured to evaluate the mechanical characteristics. From the results, as the biochar mixing rate increased, the porosity and the permeability increased, but the unit weight decreased. Even though a decreased trend was observed in the compressive strength results, they satisfied the design standard. Since the thermal conductivity was decreased during the increase of contents, biochar could be considered an excellent material for insulation performance. In addition, regression analyses were conducted regarding the relationship of unit weight with porosity, compressive strength with thermal conductivity, and porous with thermal conductivity. From the regression, significant variables for expanding the scope of the application of biochar were presented.

• Journal of Digital Policy
• /
• v.1 no.2
• /
• pp.9-15
• /
• 2022

The World Economic Forum has included Water-Energy-Food among the three major risk groups in the world, and Water-Energy-Food is related to the development strategies of countries and the lives of their citizens. This study calculates the combined Water-Energy-Food use efficiency in China for 2011-2020 based on the SBM-Malmquist index. The results show that the overall combined Water-Energy-Food efficiency in China is low, but shows an upward trend. There is a clear variability in the combined Water-Energy-Food utilization efficiency in China, with an overall geographic distribution pattern of East > Middle > West. Only Beijing and Shanghai have reached the real above effective nationwide, and all other provinces have inefficiency between input and output. The Malmquist index of integrated Water-Energy-Food utilization efficiency is 1.136, with an up ward trend, and technical efficiency and technological progress lead the improvement of integrated Water-Energy-Food utilization efficiency in China at the sametime. The Water-Energy-Food issue should be raised to a strategic level as soon as possible, and policy support should be provided for its development. Each region should establish a cross-regional coordinating body to formulate targeted measures according to the province's food production and water distribution, so as to promote economic transformation from sloppy development to green development as soon as possible.

• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.2
• /
• pp.224-233
• /
• 2023

The purpose of this study is to investigate the effect of environmental classes using EBS program on the environmental sensitivity and environmentally responsible behavior of 6th grade elementary school students. To this end, the 2015 revised elementary school curriculum was reconstructed for 6th grade students, and subject-centered environmental classes were planned, and EBS educational broadcasting environmental contents suitable for each class were applied and utilized. The conclusion of this study is as follows. First, this study analyzed the 2015 revised curriculum and reorganized the 6th grade curriculum and creative experience activities to plan the 22nd environmental class, specifying environmental sensitivity and environmentally responsible behavior that can have a positive impact on learners in each class. EBS educational broadcasting environmental contents that can be utilized were selected and environmental classes were conducted using them. Second, it was found that environmental classes using EBS educational broadcasting had a significant effect on improving the environmental sensitivity of elementary school students. The fact that environmental classes using EBS educational broadcasting goes beyond the spatial limitations of schools and informs that global citizens are interested in environmental problems and are working to solve environmental problems. Third, it was found that environmental classes using EBS educational broadcasting had a significant effect on elementary school students' environmentally responsible behavior. This is because environmental classes using EBS educational broadcasting do not stop at imparting knowledge, but suggest learning that leads to civic behavior, educational behavior, economic behavior, physical behavior, and persuasive behavior related to the environment.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.12-21
• /
• 2023

Green remodeling proposed in the Korean New Deal is a project to build or remodel eco-friendly and energy-efficient buildings using renewable energy facilities and high-performance insulation for public buildings. The government intends to achieve the carbon emission reduction target by conducting green remodeling. Major overseas cities that conduct green remodeling are actively promoting technology support and promotion along with energy performance evaluation according to building characteristics, subsidies for private revitalization, and tax benefits. With this background, the analysis of the current status and problems of the green remodeling project was performed and the Activation factors of Green Remodeling were derived from survey results. This study suggested strategic measures such as a participation of civil society, promotion, and priority selection of administration and policy measures such as a leading role of the public sector, expanding support for the socially underprivileged, and financial support and tax benefits. And this study results are expected to be utilized as basic data to promote the green remodeling project.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.456-462
• /
• 2023

An electrically conductive and transparent electrode was created by applying a dispersion of pristine single-walled carbon nanotubes (SWCNTs) and silver nanowires to a polyethylene terephthalate (PET) film using a bar coating method. The SWCNTs were added to increase the electrical conductivity and transmittance of the silver nanowires while also preventing the haze from increasing due to the stacking of multiple layers containing SWCNTs and silver nanowires on the PET substrate. The silver nanowires in the electrode were also found to be stable against oxidation. The transparent electrode displayed excellent electrical and optical properties, with a sheet resistance of 47 Ω/□, transmittance of 96.72%, and haze of 1.93%. Additionally, the sheet resistance of the electrode remained stable over time, with a change of only 6.4% after a constant temperature and humidity test, making it suitable for long-term use. A hybrid transparent electrode that is economically feasible and environmentally sustainable has been developed through the utilization of pristine SWCNT and silver nanowire.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.861-866
• /
• 2023

Unlike conventional smart farms that require chemical fertilizers and large spaces, aquaponics farming, which utilizes the symbiotic relationship between aquatic organisms and crops to grow crops even in abnormal environments such as environmental pollution and climate change, is being actively researched. Different crops require different environments and nutrients for growth, so it is necessary to configure the ratio of aquatic organisms optimized for crop growth. This study proposes a method to measure the degree of growth based on area and volume using image processing techniques in an aquaponics environment. Tilapia, carp, catfish, and lettuce crops, which are aquatic organisms that produce organic matter through excrement, were tested in an aquaponics environment. Through 2D and 3D image analysis of lettuce and real-time data analysis, the growth degree was evaluated using the area and volume information of lettuce. The results of the experiment proved that it is possible to manage cultivation by utilizing the area and volume information of lettuce. It is expected that it will be possible to provide production prediction services to farmers by utilizing aquatic life and growth information. It will also be a starting point for solving problems in the changing agricultural environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.348-355
• /
• 2023

Biodiesel is known as an environmentally friendly neutral fuel, and a policy of obligatory mixing of a certain ratio is implemented on land. In this study, to verify the feasibility of using biodiesel as a ship fuel, component analysis, metal corrosion test, and storage stability test were performed on the mixing ratios of 0 %, 5 %, 10 %, and 20 % of marine diesel and biodiesel. Component analysis evaluated a total of eight factors including density, kinematic viscosity and flash point according to ISO 8217:2017 standards and the reliability of biodiesel through metal corrosion tests and storage stability tests under atmosphere temperature and harsh conditions (60 ℃) for 180 days. Results demonstrate that component analysis satisfied the ISO 8217:2017 standard in all biodiesel mixing ratios. Furthermore, as the biodiesel mixing ratio increased, the kinematic viscosity, density, and acid value increased and the sulfur content decreased. Metal corrosion rarely occurred in the case of carbon steel, iron, aluminum, and nickel, whereas in the case of copper, corrosion occurred under the influence of oxygen-rich biodiesel under the harsh conditions (60 ℃) of 20 % biodiesel mixture. As for storage stability, discoloration, sludge formation, and fuel separation were not visually confirmed.