• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.24-25
• /
• 1995

한외여과법은 역삼투법과 정밀여과법의 중간영역의 막분리법으로 공경이 1 nm - $0.05\mum$ 정도이며 실제로 분리는 표면층에서 일어난다. 그러므로 분리특성이 없는 막하부의 저항을 줄여야 분리성능을 유지하며 투과유량을 늘릴 수 있다. 폴리비닐피롤리돈 (PVP)은 openpore구조를 형성시키면서 막내의 친수성을 증가시키는데 광범위하게 적용되고 있다. 본 연구에서는 폴리비닐피롤리돈을 폴리에테르 이미드 (polyetherimide)에 첨가시켰을 때 막내에서 구조형성과 한외 여과성는에 어떠한 영향을 미치는가 연구하였다. 막의 구조를 분석하기 위해서 주사전자현미경이 널리 사용되고 있다. 그런데 주사전자현미경은 시료의 표면에 전도성을 갖는 금을 코팅해야 하기 때문에 한외여과막의 표면을 관찰하기에는 매우 어렵다. 그래서 본 연구에서는 Atomic Force Microscope (AFM)를 사용하여 코팅과정없이 막표면을 관찰하였고 한외여과특성과 상관관계를 연구하였다.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.362-376
• /
• 2019

In this study, hydrophilic coating characteristics of PVDF [poly(vinylidene fluoride)] hollow fiber membranes with flower type cross-section prepared by thermally induced phase separation were studied. The hollow fiber used in this study was provided from PureEnvitech Co. Ltd., and the hydrophilic coating experiment was performed with different concentration and number of coating of PEBAX 1657, 2533 and 3533 block copolymer solution using a dip coating method. The hydrophilic coated hollow fiber membrane was characterized to scanning microscope and contact angle measurements to determine the degree of hydrophilization. As a result of SEM characterization, it was confirmed that the thickness of the coating layer increased as the coating concentration increased and the number of coatings increased. Contact angle of surface of hollow fibers decreased as the concentration of the coating solution increased and the number of coatings increased. Gas permeance of oxygen gas was measured for the application of the hydrophilized hollow fiber to Membrane Areated Biofilm Reactor. As a result of gas permeation test, it was confirmed that gas permeance decreased with increasing coating concentration and number of coatings, and the more hydrophilized hollow fiber coated with PEBAX 1657 showed lower gas permeance than those coated with PEBAX 2533 and 3533.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.334-338
• /
• 2003

In this study, We evaluated the removal efficiency of natural organic matters(NOM) in the Ultrafiltration(UF) and Nanofiltration(NF) membranes with molecular weight cutoff of 2500(GH), 8000(GM) and 250(HL), respectively. Filtration type was cross-flow filtration. The investigation result about raw water structure was hydrophobic 28%, hydrophilic 53% and transphilic 19%, in conjunction with XAD8/4 resin fractionation method. We were compared with UF(GM, GH) and NF(HL), in operation characteristic. In spite of poor MWCO, GM(8000Da) was superior than GH(2500Da), in the efficiency of total operation. It was showed the NF(HL) 80%, UF(GM) 50%, in the removing efficiency of HAAFP.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.52-53
• /
• 1993

투과증발 분리를 위하여 여러가지 막 소재와 공정을 개발하기 위한 노력이 다방면에서 이루어지고 있으며, 이에 관한 자료도 많이 제시되고 있으나 고분자 분리막의 개발은 아직도 미흡한 상태이다. 한편 투과증발 분리는 공정자체는 매우 간단하면서도 분리막의 투과성능에 따라 분리효율이 달라지기 때문에 여러종류의 막의 개발이 필요하다. 따라서 본 연구에서는 물/유기용제 혼합액에서 물을 분리하기 위하여 친수성이 강한 두 고분자 재료인 poly(vinyl alcohol)(PVA)와 carboxymehtylcellulose(CMC)를 브랜드하여 목적하는 분리기능을 갖는 새로운 막을 제조하여, 물/유기용제, 혼합액의 분리특성을 브랜드비와 온도 및 농도 그리고 분리시간에 따라 각각 검토하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.815-821
• /
• 2013

The efficiency and lifetime of a polymer electrolyte membrane fuel cell (PEMFC) system is critically affected by the humidity of the incoming gas, which should be maintained properly under normal operating conditions. Typically, the incoming gas of a fuel cell is humidified by an external humidifier, but few studies have reported on the device characteristics. In this study, a laboratory-scale planar membrane humidifier is designed to investigate the characteristics of water transport through a hydrophilic membrane. The planar membrane humidifier is immersed in a constant temperature bath to isolate the humidifier from the effect of temperature variations. The mass transfer capability of the hydrophilic membrane is first examined under isothermal conditions. Then, the mass transfer capability is investigated under various conditions. The results show that water transport in the hydrophilic membrane is significantly affected by the flow rate, operating temperature, operating pressure, and flow arrangement.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.31-38
• /
• 2024

In this study, evaluated the properties of layered silicate-based nanocomposite sensitive film. For the fabrication of nanocomposite materials, we selected organically modified layered silicate materials, specifically Cloisite^® and Bentone^®, which were treated with quaternary ammonium salts. The impedance of the humidity sensors containing organically modified montmorillonite/hectorite clay decreased with increasing relative humidity(RH%). In the case of the Cloisite^® humidity sensor exhibited slightly better impedance linearity and hysteresis compared to the Bentone^® 38 humidity sensor. Additionally the impedance of the sensor with Bentone^® 38 addition was the lowest when compared to the Cloisite^®-modified sensor. Comparing the Cloisite^®-modified sensors individually, we observed different moisture absorption characteristics based on the hydrophilic properties of the organic-treated materials. The response speed of Cloisite^® 93A tended to be slower due to differences in moisture evaporation rates influenced by the hydrophilic organic components. Based on these results, moisture barriers utilizing organically modified layered silicate materials may exhibit slightly lower moisture absorption properties compared to conventional polymer-based moisture barriers. However, their excellent stability, simple processing, and cost-effectiveness make them suitable for humidity sensor applications.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.293-298
• /
• 2016

A hydrogel electrolyte consisting of 6 M KOH aqueous solution, potassium polyacrylate (PAAK, 3 wt.%), and a hydrophilic silica OX50 (1 wt.%) was prepared to use as an electrolyte medium coated on a Scimat separator of activated carbon supercapacitor. The silica particle distributed homogeneously on surface pores of the separator to increase ionic conductivity and electrochemical stability of the hydrogel electrolyte. The silica addition also involved superior specific capacitance even at higher scan rates due to decrease in interfacial resistance between hydrogel electrolyte and activated carbon electrode.

• Membrane Journal
• /
• v.22 no.5
• /
• pp.326-331
• /
• 2012

In this study, rejection behavior of 2-MIB (methylisoborneal) and geosmin which are known as taste-and-odor (T & O) causing micropollutants in drinking water source was investigated using hydrophobic polyethersulfone (PES) nanofiltration "loose" membrane (MWCO : 400 Da). It was found that the rejection of the geosmin was higher than that of the 2-MIB in all experimental conditions tested. This study also showed that the rejections of 2-MIB and geosmin were increased by increasing solution pH due to enhancing electrostatic repulsions between micropollutants and membrane surface. The presence of natural organic matter led to increase the rejection of the hydrophobic 2-MIB and geosmin and the effectiveness was more pronounced at higher solution pH. Increasing hydrophilicity of the hydrophobic membrane surface by coating with $TiO_2$ particles resulted in the significant increase in the rejection of 2-MIB and geosmin. In addition to the charge repulsion, this result suggests that hydrophobic-hydrophobic interaction should be one of main rejection mechanisms of T & O compounds by NF membrane.

• Membrane Journal
• /
• v.20 no.3
• /
• pp.235-240
• /
• 2010

The aim of this paper is to evaluate and compare the performances of forward osmosis (FO) membranes using different materials. The FO membranes were synthesized using interfacial polymerization method on hydrophobic polysulfone (PSf) and relatively hydrophilic polyethersulfone (PES) supports. The FO performance such as flux and back diffusion was measured. The resulting fluxes of PSf and PES FO membranes were $4.3\;L/m^2hr$ and $17.8\;L/m^2hr$, respectively. The flux of the PES FO membrane was higher than that of the PSf FO membrane. The results indicated that hydrophillictity of the support membrane is important for increasing flux in FO process. Moreover, with decreasing the support layer thickness, flux increased considerably.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.317-324
• /
• 2014

It is very well known that the conventional polyamide (PA) thin film composite (TFC) reverse osmosis (RO) membranes have excellent permselective properties, but their chlorine tolerance is not good enough. In this study, to improve such chlorine tolerance, microporous membranes containing hydrophilic functional groups such as -COOH were used as a support to prepare PA TFC RO membranes, employing the conventional interfacial polymerization method. Meta-phenylene diamine (MPD) and 2,6-diamine toluene (2,6-DAT) were used as diamine monomers and tri-mesoyl chloride (TMC) as an acid monomer. The membranes prepared were characterized using various instrumental analytical methods and permeation test set-up. The flux obtained from the membranes prepared so was more than $1.0m^3/m^2day$ at 800 psi of operating pressure, while the salt rejection was over 99.0%. The chlorine tolerance of them was also found to be better than that of the membrane prepared by using conventional polysulfone support without hydrophilic functional groups.