• Title/Summary/Keyword: 치환비율

Search Result 281, Processing Time 0.034 seconds

Nucleophilic Substitution at a Carbonyl Atom (III). Solvolysis of Benzoyl Chlorides in Acetone-Water Mixtures (카르보닐 탄소 원자의 친핵성 치환반응 (제3보) 아세톤-물 혼합용액에서의 염화벤조일의 가용매반응)

  • Wang Gi Kim;Ik Choon Lee
    • Journal of the Korean Chemical Society
    • /
    • v.17 no.4
    • /
    • pp.235-239
    • /
    • 1973
  • Kinetic studies of benzoyl chlorides solvolysis have been carried out in acetone-water mixtures. Results show that bimolecular process predominates in the low water content region but SN1 process becomes increasingly important in the high water content solvent composition.

  • PDF

Optimum Mix Design of Concrete Incorporating Waste Foundry Sand (폐주물사를 혼입한 콘크리트의 적정배합설계)

  • 박제선;윤경구;김태경;백민경
    • Magazine of the Korea Concrete Institute
    • /
    • v.9 no.6
    • /
    • pp.195-206
    • /
    • 1997
  • 산업폐기물인 폐주물사를 재활용하여 에너지절감과 환경오염방지효과를 얻을 수 있다. 반요인실험법을 사용하여 폐주물사를 잔골재에 일정비율 치환한 콘크리트의 적정배합설계제시를 위한 예비실험에서 물-시멘트비, 폐주물사의 잔골재치환율, 잔골재율, 슬럼프와 같은 주요변수와 변수사이의 2차상호작용을 파악하였다. 예비실험결과 폐주물사의 잔골재치환율 70%까지 실시하였을 때 폐주물사를 혼입한 콘크리트의 강도 발현에 가장 중요한 변수는 물-시멘트비로 분석되었고 폐주물사의 잔골재치환율은 거의 영향이 없는 것으로 분석되어 폐주물사를 콘크리트의 잔골재로 대체할 수 있음을 알 수 있었다. 각 변수의 2차상호작용에서는 폐주물사의 잔골재치환율과 잔골재율의 상관관계가 콘크리트의 강도발현에 가장 큰 영향을 미치는 것으로 나타났다. 목표압축강도에 대한 적정배합조건을 폐주물사의 잔골재 치환율에 따라 물-시멘트비, 잔골재율에 대해 제시하였다.

Assessment of Bottom Ash Amendment on Soil and Turfgrass Qualities in Golf Course (석탄바닥재의 골프장 토양 및 잔디생육 개량 영향평가)

  • Lee, Ju-Young;Choi, Hee-Youl;Shim, Gyu-Yul;Yang, Jae-E
    • Proceedings of the Turfgrass Society of Korea Conference
    • /
    • 2011.02a
    • /
    • pp.25-32
    • /
    • 2011
  • 본 연구는 화력발전의 부산물로 발생하는 석탄바닥재가 골프장 사질 토양의 개량재로 사용 적합한지를 평가하기 위해 수행되었으며, 결과를 요약하면 다음과 같다. 1. 석탄바닥재의 화학성을 분석한 결과 총질소 0.34%, 가용성 인산 $52mgL^{-1}$, 치환성 칼륨 $51mgL^{-1}$ 뿐만 아니라 소량의 치환성 칼슘과 마그네슘을 함유하고 있어 식물생육에 이롭고, 유해중금속함량은 Cd, $Cr^{6+}$, Pb, Ni, As는 $1mgL^{-1}$ 이하, Cu 농도는 $1.25mgL^{-1}$ 검출되어 토양환경보전법의 토양오염우려기준 이하이므로 석탄바닥재 재활용으로 인한 토양오염 가능성은 매우 낮은 것으로 판단된다. 2. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료의 투수계수와 유효수분함량을 측정한 결과 석탄바닥재 혼합비율이 증가할수록 투수계수는 유의성 있게 감소하고 유효수분함량은 유의성 있게 증가해 석탄바닥재가 모래 토양의 낮은 수분보유력을 개선하는 효과가 있음을 확인하였다. 3. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료를 잔디식재층으로 조성한 라이시미터에 잔디종자 파종 후 약 4개월 뒤 잔디밀도가 완전히 형성된 후에 시비 후 3일 간격으로 채취한 용탈수를 분석한 결과 1일과 4일 후에 채취한 초기 용탈수에서는 석탄바닥재 혼합비율이 높을수록 $NO_3-N$, $NH_4-N$ 및 K함량이 유의성 있게 감소했으며, 대조구에 비해 석탄바닥재 혼합비율이 높은 처리구일수록 $NO_3-N$, $NH_4-N$ 및 K함량이 용탈수 채취기간 동안 지속적으로 용탈되었다. 이 결과로 석탄바닥재가 모래 토양의 낮은 양분 보유력을 개선하는데 효과적이고 석탄바닥재처리가 대조구에 비해 오랫동안 식물 생육에 필요한 양분을 공급하는 효과가 있음을 확인하였다. 4. 골프장 그린상구조와 동일한 시험포장을 만들고 모래 토양에 석탄바닥재 10%와 20% 그리고 피트, 액시스, 이소라이트를 부피비로 10% 비율로 혼합한 시료를 잔디식재층으로 조성하고 크리핑 벤트그래스(Agrostis paulstris Huds), Penn A-4 $10gm^{-2}$을 파종한 후에 처리구별로 잔디 품질을 평가하기 위해 잔디 밀도, 뿌리길이, 색상 및 시각적 품질을 조사한 결과 석탄바닥재 처리구는 기존에 사용하는 개량제인 피트, 액시스, 이소라이트 처리구와 동등한 잔디생육 촉진 효과가 있는 것으로 조사되었다. 5. 결론적으로 석탄바닥재는 골프장 토양의 물리적 특성과 화학적 특성을 개선하고 잔디생육에 필요한 양분을 공급하는데 효과적인 토양개량재라고 할 수 있다.

  • PDF

Opto-Physical Properties of Ophthalmic Lens Polymer Containing σ, m, p-Substituted Difluoroaniline as Additives (σ, m, p-위치로 치환된 Difluoroaniline을 첨가제로 사용한 안의료용 렌즈 고분자의 물리·광학적 특성)

  • No, Jung-Won;Sung, A-Young
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.19 no.1
    • /
    • pp.69-77
    • /
    • 2014
  • Purpose: The functional ophthalmic lenses containing fluorine-substituted aniline group (2,4-difluoroaniline, 2,6-difluoroaniline, 3,4-difluoroaniline) were manufactured and the physical and optical characteristics of copolymerized ophthalmic lens were investigated. Methods: HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone), MA (methacrylic acid), the cross-linker EGDMA (ethylene glycol dimethacrylate) and the initiator AIBN (azobisisobutyronitrile) were used as a basic combination and fluorine-substituted aniline group (2,4-difluoroaniline, 2,6-difluoroaniline, 3,4-difluoroaniline) were used as additives for preparing the hydrogel soft contact lenses. The hydrogel ophthalmic lens was manufactured by cast mould method and the ophthalmic lenses were stored in a 0.9% NaCl normal saline for 24 hrs. Results: The optical transmittance of the sample with addition 2,4-difluoroaniline showed that the UV-B(9.8~51.4%), UV-A(58.8~79.2%) and visible transmittance(87.0~90.4%). In the case of 2,6-difluoroaniline were measured the UV-B(80.2~83.2%), UV-A(85.8~86.4%), and visible transmittance(90.8~91.4%). Also, the optical transmittance of ophthalmic lens containing 3,4-difluoroaniline were measured the UV-B transmittance of 3.8~30.4%, UV-A transmittance of 47.8%~74.4% and the visible transmittance of 86.2~91.0% respectively. Conclusions: Based on the results of this study, 2,4-difluoroaniline and 3,4-difluoroaniline can be used effectively as additive for UV-blocking ophthalmic contact lenses.

Properties of Cementless Loess Mortar Using Eco-Friendly Hardening Agent (친환경 무기질 고화재를 사용한 무시멘트 황토모르타르의 특성)

  • Jung, Yong-Wook;Kim, Sung-Hyun;Lee, Dong-Gyu
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.3 no.4
    • /
    • pp.355-365
    • /
    • 2015
  • This study examined the fluidity and strength properties, water resistance, durability, and freeze-thaw of cementless loess mortar using an eco-friendly hardening agent. The experimental result indicates that 28 days compressive and flexural strength of the loess mortar was increased regardless of the weathered granite soil and loess mixture ratio as the replacement ratio of the hardening agent increases. The strengths were significantly increased until 14 days regardless of the hardening agent, while the effect on the strengths increasement was relatively low after 14 days. Thus, the strength development of loess mortar concrete was found to be faster than that of the normal concrete. In addition, when the hardening agent of 10% was used, the average flexural strength was 1.7MPa which is insufficient compared to the 28-day flexural strength of 4.5MPa for the paving concrete. However, the flexural strengths of the loess mortar concrete using the hardening agents of 20% and 30% were 4.0MPa and 5.3MPa, respectively. Thus, the hardening agent need to be at least 20% so that the loess mortar can be used for paving concrete. The experiment for water resistance shows that the repeated absorption and dry reduced mass regardless of the mixing ratio of the loess. The maximum length change also decreased with increasing the substitution rate loess mixture ratio and the hardening agent. The result of the freeze-thaw resistance test indicates that the relative dynamic modulus of elasticity at 300 cycle freeze-thaw with the hardening agents of 20% and 30% were 75% and 79%, relatively. Thus, the hardening agent of at least 20% is required to obtain the relative dynamic modulus of elasticity of 60% for the loess mortar.

Anticoagulation Management after Mitral Valve Replacement with the St. Jude Medical Prosthesis (승모판치환 환자의 항응혈제 치료)

  • 김종환;김영태
    • Journal of Chest Surgery
    • /
    • v.31 no.12
    • /
    • pp.1172-1182
    • /
    • 1998
  • Background: Primary goal of anticoagulation treatment in patients with mechanical heart valve is the effective prevention of thromboembolism and safe avoidance of bleeding as well. Material and Method: Two-hundred and nine patients with the St. Jude Medical prosthesis operated on between 1984 and 1995, for mitral(MVR 122), aortic(AVR 39) and double mitral and aortic valve replacement(DVR 48) respectively, were studied on the practically achieved levels of anticoagulation and the clinical outcomes. Patients were on Coumadin and followed up by monthly visit to outpatient clinic for examination and prothrombin time measurement to adjust the International Normalized Ratios(INRs) within the low-intensity target range between 1.5 and 2.5. Result: A total anticoagulation follow-up period was 1082.0 patient- years(mean 62.1 months) and INRs of 10,205 measurements were available for evaluation. The accomplished INRs among the replacement groups were not significantly different and only 65% of INRs were within the target range. And, in individual patients, only 37% of patients had INRs included within the target range in more than 70% of tests during follow-up period. The levels of INRs in patients with atrial fibrillation, which was found in 57% of patients, were definitely higher than the ones measured in patients with regular rhythm(p<0.001). Thromboembolisms were experienced by 15 patients with the incidence of 1.265%/patient- year(MVR 1.412%, AVR 0.462% and DVR 1.531%/patient-year) and major bleeding by 4 patients with the incidence of 0.337%/patient-year(MVR 0.424%, AVR none and DVR 0.383%/patient-year). Frequent as well as prolonged missing of prothrombin time tests was the main risk factor strongly associated with the thromboembolic complications(odds ratio 1.99). The proportion of INRs within target range of less than 60% in individual patient was the highly significant risk factor of both thromboembolic and overall embolic and bleeding complications(p<0.004 and p<0.002 respectively). Conclusion: In conclusion, the low-intensity therapeutic target range of INRs was adequate in patients with AVR and in sinus rhythm. However, the patients with replacement of the mitral valve were more likely to require higher target range of INRs, especially in the presence of atrial fibrillation, to achieve the practical levels of anticoagulation enough to prevent thromboembolic complications effectively. For the higher therapeutic target range of INRs between 2.0∼3.0, further accumulation of clinical evidences are required. It is highly desirable to improve the patients' compliance under continuous instructions in visiting outpatient clinic and in taking daily Coumadin without omission and to keep INRs consistently within optimal range with tight control for minimization of chances and of periods of exposure to the risk of complications. And, particularly, patients with high risk of complications and with wide fluctuation of INRs should be better managed with frequent monitoring anticoagulation levels.

  • PDF

Adsorption Characteristics of Nitrogen Monoxide on Y-type and ZSM-5 Zeolites Exchanged with Alkali/Alkaline-earth Metal Cation (알칼리/알칼리토금속 양이온을 치환한 Y형 및 ZSM-5 제올라이트의 NO 흡착 특성)

  • Kim, Cheol Hyun;Lee, Chang Seop
    • Applied Chemistry for Engineering
    • /
    • v.16 no.6
    • /
    • pp.857-864
    • /
    • 2005
  • Dealuminated and alkali/alkaline-earth metal exchanged Y-type and ZSM-5 zeolites were prepared as catalytic materials. Comparing with the composition of starting material, the magnitude of Si/Al ratio was increased after dealumination and cation exchange process. The ratio of Si/Al on surface was appeared to be larger than that in bulk. The destruction of basic frame in catalysts observed was understood to be due to a detachment of aluminum, which results in reducing framework while increasing non-framework. This phenomenon becomes more serious with increasing time of steam treatment and even more significant for the cation exchanged catalysts. The desorption peaks of the NO-TPD profiles taken after dealumination and cation exchanged Y-type and ZSM-5 zeolites shifted to the low temperature region. It was also found that the longer the steam treatment time, the degree of shift toward low temperature region was increased. The catalytic activities are dependent on the nature of cation exchanged, the ratio of Si/Al and the ratio of framework/non-framework by a change in basic frame.

Nutrient Environments of Japanese Cedar(Cryptomeria japonica) Forests in Cheju Island III. Potassium Supplying Capacity in Soils of Different Site Quality (제주도(濟州道) 삼나무(Cryptomeria japonica) 조림지(造林地)의 영양환경(營養環境)에 관(關)한 연구(硏究) III. 토양(土壤)의 K 공급력(供給力)과 지위(地位))

  • Jin, Hyun-O
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.26 no.4
    • /
    • pp.230-235
    • /
    • 1993
  • This study was carried out to investigate the supplying capacity of various forms(Water soluble, exchangeable, and available) of potassium in soils of different site quality by using surface soils from the Japanese cedar(Cryptomeria japonica) forests in Cheju island. Major results can be summerized as follows. Using continuous leaching methods with 0.01N-HCl, accumulated amounts of available potassium from surface soils of site upper and site low were about 0.6me/100g and 0.4me/100g, respectively. The release ratio of available potassium in the first $1{\ell}$ leaching of 0.01N-HCl to the total available potassium leached with $6{\ell}$ of 0.01N-HCl was over 80% for both sites, and this suggester that surface soil of both sites had the weak potassium adsorptivity as the typical volcanic ash soil. The ratio of the exchangeable potassium to the water soluble potassium was 1 : 1 for both sites. The ratio of the exchangeable potassium to the available potassium was 1 : 1 for the site low but the smaller ratio value for the site upper, indicating that the potassium supplying power of the site upper was greater than that of the site low. Available potassium was highly correlated with exchangeable Ca($0.83^{**}$) and Mg($0.84^{**}$).

  • PDF

CZTS 박막 태양전지 후속 열처리에 관한 연구

  • Hwang, Dae-Gyu;Jeon, Dong-Hwan;Go, Byeong-Su;Kim, Dae-Hwan;Seong, Si-Jun;Gang, Jin-Gyu
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.08a
    • /
    • pp.308.2-308.2
    • /
    • 2013
  • Cu2ZnSnSe (CZTS)는 CuInSe2 (CIS) 중 희소 원소인 In을 Zn 및 Sn 으로 치환하여 만든 화합물 반도체이다. CZTS 의 특징은 그 구성원소가 지각 중에 풍부하게 존재하고, 모든 원소의 독성이 극히 낮다는 것이다. 이에 비해 CIS 중에 In과 Se 의 지각 함유량은 0.05 ppm 이하이다. 따라서 CZTS 는 값이 싼 범용 원소만으로 구성된 새로운 태양전지 재료가 된다. 본 연구에서는 다양한 Se 비율로 동시 증발법으로 증착된 CZTS 박막의 후속 열처리 효과에 관하여 발표하고자 한다. 증착된 CZTS 박막은 적정량의 Se 비율과 후속 열처리를 통해서 이차상이 없는 CZTS 결정성을 나타내는 XRD 결과를 보여주었으면, 3.6% 의 효율을 보여주었다.

  • PDF

Effect of Organic Substrates Mixture Ratio on 2-year-old Highbush Blueberry Growth and Soil Chemical Properties (유기자재 종류별 혼합비율이 2년생 하이부시 블루베리의 유목 생육과 토양환경에 미치는 영향)

  • Kim, Hong-Lim;Kim, Hyoung-Deug;Kim, Jin-Gook;Kwack, Yong-Bum;Choi, Young-Hah
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.43 no.6
    • /
    • pp.858-863
    • /
    • 2010
  • The blueberry farming requires the soil condition of well-drainage, pH of 4.5 to 5.2, and high in organic matters for stable growth and development. Most of soil type of cultivated land in Korea, however, belongs to alkaline soils with low organic matter content and poor drainage. Therefore, the blueberry farmers use peat moss heavily to improve the soil condition, but the guideline on the effective and economic ratio of peat moss is not established yet. This study was performed to determine the cost effective peat moss ratio for amending soils, and to investigate the feasibility of using sawdust and coco peat as soil amendments. Peat moss, coco peat and sawdust are mixed with soil at the ratio of 0, 12.5, 50 and 100% (v/v). Among 3 organic materials with various mixture ratios, the pH of soil was the lowest in 100% peat moss and sawdust mixtures (pH 3.67 and pH 3.73, respectively), followed by pH 5.30 at 50% peat moss. The soil organic matter content are directly proportional to the mixture ratios in all three organic materials and the same trend was observed in the variation of content of exchangeable potassium in the coco peat treatments. On the contrary, the content of available phosphate, exchangeable calcium and magnesium decreased with increasing the ratio of organic materials. The nitrogen content in the leaves decreased as increasing the ratio of peat moss and coco peat in soil, but not of sawdust. The content of phosphate decreased but potassium increased as the ratio of sawdust and coco peat increased. There was no clear difference in the contents of magnesium and calcium among 3 organic materials. The plant height, stem diameter and dry weight of blueberry plants were the highest in 50 % peat moss, followed by 12.5% peat moss and 12.5% coco peat. The plants in 100% peat moss showed very poor growth. It can be concluded that peatmoss, when applied and managed appropriately, will be a good material for improving soil condition as well as securing desirable growth for blueberry. Upon coupling economic aspect, the optimum mixing ratio of peatmoss for blueberry farming is approximately 25-50%.