• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.105-113
• /
• 2006

This paper presents the results of an experimental investigation carried out to evaluate the mechanical properties of concrete mixtures in which fine(S) and coarse(G) aggregate was fully replaced with fly ash(FA). And flowability reduction problem in a large amount of fly ash concrete settled addition water($W_f$) in concrete mixture. In the test, water-cement ratio($W_c/C$) was 0.35, 0.45, and water-fly ash ratio($W_f/FA$) was 0.35, 0.45. The fly ash replacement is two different method of P and Q. The P method is mix property that the fly ash and addition water($W_f$) weight is equal to the aggregate weight [ $FA+W_f$ = G (or S)]. The Q method is mix property that fly ash is equal to aggregate weight, and added addition water($W_f$) [$FA+W_f$ > G (or S)]. Test were performed for properties of fresh concrete and compressive strength were determined at 3, 7, 28 and 91 days. The result, compressive strength was improvement that $W_c/C=0.35$, $W_f/FA=0.35$ and fine aggregate replacement in P method series than others. The flowability at Q method was improvement result than P method, but compressive strength was not. Test results indicate significant improvement in the strength properties and flowability of plain concrete by the inclusion of fly ash as fully replacement of fine and coarse aggregate, and can be effectively the fly ash replacement method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1357-1365
• /
• 1991

This paper proposes the generation of several classes of frequency hopping patterns. which are derived by permutation, for an asynchronous frequency hopping spread spectrum multiple accecss system (FH/SSMA). The first class of hopping patterns is obtained by using a Latin square. The second class of hopping patterns is derived by generalizing the first class which is designed by using a permutation technique. The third class of hopping patterns is designed by using a rotational base of elements. We evaluate the hit property of the proposed classes of hopping patterns when these patterns are nutually shifted in an FH/SSMA system. Compared to the Reed Slolmon sequences generated by the conventional method, the sequence obtained by the permutation technique can reduce the number of hits among hopping frequencies in asynchronous time/frequency shift.

• 레미콘
• /
• s.85
• /
• pp.11-21
• /
• 2005

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.189-194
• /
• 2011

To reinforce bearing capacity-changed section or different foundation in the same building, empirical or simple tools have been used. To solve this problem, we suggest the analytical solution that can evaluate and reinforce the stability of foundation. To estimate the effect of reinforcement by replacement in different foundation, soil stiffness evaluation method taking into account the influence factor with respect to depth beneath the foundation need to be applied. In this paper, graphs and relevant formulae are suggested to calculate equivalent soil reaction coefficient showing the effect of reinforcement by crushed stone and lean concrete replacement.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.21-22
• /
• 2009

최근, 헵타메틴 시아닌색소(heptamethinecyanine)는 그 적용 범위가 넓기 때문에 많은 연구자들의 관심을 받고 있다. 특히, photo-sensitizers, dye lasers, optical recordings와 storage media 등 다양한 분야에 적용이 가능하다. 헵타메틴 시아닌색소의 주된 특징은 polymethine 사슬에 연결된 cyclohexene 고리에 의하여 근적외선 부근에서 흡수가 이뤄진다는 것이다. 근적외선 색소의 흡수 특성을 HOMO와 LUMO 에너지 전위를 사용하여, 수치화 함으로써 분자간, 분자내 상호작용을 분석 할 수 있다. 따라서, 본 실험은 헵타메틴 시아닌 색소의 치환체에 따른 전기화학적 특성을 순환 전압-전류법(Cyclic voltammetry)과 분자 모델링을 통하여 HOMO와 LUMO의 에너지 준위를 구하고, 치환체 효과가 헵타메틴 시아닌색소에 미치는 전기화학적 특성을 UV-Vis와 계산으로부터 얻어진 에너지준위를 분석하고자 한다. 본 실험에 사용된 Uv-Vis 스펙트럼 측정은 Agilent 8453 UV-Vis spectrophotometer를 사용하였고, 전기화학적 분석 방법인 순환 전압-전류법은 Versa STAT 3 (Princeton allied research in USA)를 사용하였다. 순환전압-전류법의 측정은 Acetonitrile 용액에 $TBAPF_6$ (Tetrabutylammonium hexafluorophosphate)를 전해질로 하고, Ag/$Ag^+$을 기준전극으로 사용하여 주사 속도를 50mV/s로 하여 측정 하였다. 치환체에 의한 영향을 알아보기 위하여 분자구조 최적화 모델링을 사용하였다. 3차원 분자입체 특성 및 에너지 준위 상태는 Materials studio 4.2를 사용하여 특성을 예측 하였다. 본 연구에서는, 헵타메틴 시아닌 색소의 기본 골격에 각기 다른 치환체를 치환 시켜 치환체에 의한 영향을 전기화학적인 방법인 순환 전압-전류법(Cyclic voltammetry)와 분자 모델링 방법을 사용하여, HOMO와 LUMO에너지 준위 값을 구함으로써 치환체에 의한 영향을 알아보았다. 치환체로는 Dye 1과 Dye 2로 치환된 헵타메틴 시아닌 색소를 사용하였다. 이렇게 얻어진 HOMO/LUMO 에너지 준위 값으로부터 이온화 에너지($I_p$)와 전자 친화도($E_a$) 또한 구할 수 있는데, $I_p$와 $E_a$는 분자 오비탈과 전자전이에 관련된 값들이고, 이는 계산을 통하여 얻을 수 있다. 순환 전압-전류법의 계산 방법은 봉우리 전위(peak postential)와 (onset potential)방법이 있는데, 이 계산을 통한 전위 값들이 봉우리 전위 계산 방법이 onset potential 방법에 비하여 작은 전위 값으로 나타난다. 하지만 이 두 가지 방법 모두 현재 순환 전압-전류법을 사용하여 HOMO/LUMO 에너지 준위를 측정하는 방법에 쓰이고 있으며, 어떠한 계산 방법이 더 정확하다고는 말 할 수 없지만, 본 실험 결과를 통하여 비교 분석한 결과 onset potential 계산 방법이 봉우리 전위 계산 방법에 비하여 정확하다고 판단된다. Dye 1과 Dye 2를 순환 전압-전류법으로 측정한 결과 각기 다른 전위를 나타내고 이것을 계산을 통하여 정량화하면 Dye 2가 Dye 1에 비하여 높은 전위 값을 갖음을 알 수 있는데, 이것은 ethyl 에 비하여 surful 원자의 전자공여성이 더 크다고 할 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.24-34
• /
• 2020

This research is a study on the characteristics of OPC-slag cement using nano-silica solution (NSS) with water-weight substitution method. The new replacement method is a fundamental step to study the behavior of cement with higher NSS replacement rates than previous studies. NSS was replaced by 10%, 20%, 30%, 40%, and 50% of the mixing water weight. As a result, the mechanical and microstructural characteristics were improved. This can be summarized in two ways. First, when the NSS is replaced with mixing water, the homogeneous dispersion action of the nano-silica particles is improved. This promotes initial hydration. Second, substitution of NSS with higher density than mixing water reduces w / b. This forms a dense hydration reaction material. The new substitution method did not show any degradation of mechanical and microstructural properties as compared with the results using the powdered nano-silica particles revealed in the previous study. Therefore, it is considered that the method of weight substitution of NSS used in this study can be applied to the formulation of OPC-slag cement.

• 레미콘
• /
• no.10 s.61
• /
• pp.67-73
• /
• 1999

• Journal of the Korean Chemical Society
• /
• v.68 no.4
• /
• pp.185-190
• /
• 2024

Recently, it was reported that the benzobisoxazole (BBO) molecule can be used for independent modulation of the HOMO and LUMO energy levels. In this study, we utilized this interesting property of BBO to quantitatively investigate the substituent effects according the substituents. We designed and proposed four BBO model systems (1BBO, 2BBO, 3BBO and 4BBO) by extending the π-conjugation lengths based on a BBO molecule. Two directions of substitution (x-axis and y-axis) and 15 various substituents were considered. From strong correlation between the LUMO energy levels of x-axis substitution and HOMO energy levels of y-axis substitution calculated from DFT method, it is found that the standardization of substitution effects can be established from BBO model systems. In addition, we demonstrated that the HOMO values of y-axis substituted 3BBO show the best performance to define the order of substituent effects. Our proposed way can be used to expect the substituent effect of any arbitrary substituents and develop the organic sensors and organic light emitting diodes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.245-245
• /
• 2011

$BiFeO_3$ (BFO)박막에 전위금속 Pb와 Co를 각각 치환환 박막을 chemical solution deposition 방법으로 Pt/Ti/SiO2/Si(100) 기판위에 증착하였다. Bi 자리에 Pb와 Co를 20 at.% 치환하였으며, 치환된 $Bi_{0.8}Pb_{0.2}FeO_3$ (BPFO), $Bi_{0.8}Co_{0.2}FeO_3$ (BCFO) 박막의 구조적, 자기적 특성 변화를 BFO 박막과 비교하여 조사하였다. XRD 패턴을 분석한 결과 BPFO, BCFO 박막들은 모두 rhombohedrally distorted perovskite 구조였으며 불순물인 pyrochlore 상이 약하게 관측되었다. 치환이 이루어진 BPFO, BCFO 박막들의 자기 이력곡선은 안정된 포화곡선을 나타냈으며 BFO의 포화값(5 emu/$cm^3$)에 비해 크게 증가된 55 emu/$cm^3$, 35 emu/$cm^3$의 값을 나타냈다. 또한 보자력장(coercive field, Hc)값도 BFO의 500 Oe보다 크게 증가된 1,200 Oe, 800 Oe의 값을 보였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.3
• /
• pp.3-15
• /
• 2007

In this paper, we propose a simple scheme which produces a new S-box from a given S-box. We use well-known conversion technique between the polynomial functions over a finite field $F_{2^n}$ and the boolean functions from $F_2^n$ to $F_2$. We have applied this scheme to Rijndael S-box and obtained 29 new S-boxes, whose linear complexities are improved. We investigate their cryptographic properties via transform domain analysis.