• Archives of design research
• /
• no.16
• /
• pp.101-110
• /
• 1996

CHOOSA GORACK which is a typical example of traditional houses in the CHO SEON dynasty consists of the four terraced builfing group. Among those,SADANG CHAI are located in the highest level,and SADANG CHAI and SADANG CHAI are toward south direction.It means that building orientation and level were influenced by the distinction of social level and the idea of ancester worship. Floor and ceiling level in the same building is different which was caused by the distinetion of social level in the CHO SEON dynasty and an ariental dual as a variety of openings,exposed ceilings,and furniture against a wall were creating a typical Korean visual harmony. Although the furniture and equipments were very important elements in ONDOL BANG the occupance ratio of these were low because the free space in BANG should be utilized effectively to accommodate the space variation.Both an AN CHAI and SARANG CHAI were composed by the standard space module called KAN.And interior elements were established by several factors such as the human scale,the behavior pattern in traditional sitting life style, and the lumber size of post and lintel construction of Korean house.BANG and DAE GHUNG, composed of KAN,were expanded and arranged side by side so that the natural light and ventilation through them could be used in the result of the kind of lay out,traffic circulation was disturved.In conclusion,CHOOSA GOTACK was formed by the sirect effice of the KOREAN penisula. However this study was based on one sample. It may not enough to deduct soild conclusion.Therefore continuous and farher study is needed for the sestemane evaluation.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.134-153
• /
• 2009

This study is to examine closely the frame structure of buildings in the royal palace of Josen dynasty, focused on inner buildings of Changgyeonggung(昌慶宮) which is built in 19th century, through considering the member size of main structure and analyzing the slope of a rafter. The plans of a size on main member are as follows ; firstly, a length of the perimeter column was accorded with Gunggwolji(宮闕誌) and the planning size of interior column was shown to a Chon(a Korean inch, 寸) unit. The slope of long common rafter that is formed between the perimeter and interior columns was grasped with limits of a definite value. This is that the perimeter column is trimmed to a Chon unit, as Yeongchunheon(迎春軒), In the roof frame of Korean traditional timber architecture, the slope of rafter, first of all, is to decide the slope of long common rafter and then to decide a height of ridge piece settled whole height of a building. And it is regulated with position and height of a post so as to set up middle rafter. Especially, the slope of long common rafter, it is not to be decide through scale of a building but through a length of the perimeter column and composition of bracket structure. And in case middle rafter, the process of its slope is to devide the central bay on the side of a building into equality, and then to adjust position and length of a post.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.1
• /
• pp.59-74
• /
• 1994

The purposes of this paper were to suggest the procedures for a sizing sys- tem which can provide good fitting of apparel and minimize the loss due to excessive inventory, and to determine an adequate apparel sizing standard. An anthropometric database used for this study was the 1992 National Anthro- pometric Survey of Koreans. The database was limited to 1,336 women who were 18-51 years old. They study was conducted by classifying ages into two groups (18-33, 34-51) using Wilk's lamda. Three principal components : laterality( fullness), linearity(length) and characteristic of torso were selected to describe body types, and these three body type classification of each group were selected by cluster analysis. It was found that all intervals between standard sizes were not equal. They were narrow around the center with high frequencies of the customers but wide in both tail with low frequencies. It was also found that the optimal sizes suing the loss function can be applied well in practice.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.529-533
• /
• 1995

안장은 인체하중이 집중되고, 자전거의 충격과 진동이 직접 전달되는 부위로서 주행 안락도를 높이고 buttock의 discomfort를 감소시킬 수 있도록 설계되어야 한다. 본 연구의 목적은 인체곡면을 본뜬 안장형상 설계를 통하여 buttock의 국부적 discomfort를 감소시키고자 하는 것이다. 인간의 앉은자세에 대한 해부학적 고찰을 통해 좌골결절(Ischial Tuberosity)과 치골결합면(Symphyseal Surface)이 안장과 직접 맞닿는 면으로 파악되었으며, 이들 부위에 대한 집중적 개선이 이루어져야 할 것으로 제안되었다. 문헌조사를 통해 의자설계시 고려해야 할 인체치수 및 지침을 파악하였으며, 안장과 의자의 기능비교를 통해 이를 선별적으로 적용하였다. 인체곡면 측정을 위해 Rod Matrix(3cm 간격, 13*20)방법을 이용하여 10명의 buttock contour를 측정하였으며, 측정된 자료를 분석하여 안장의 곡면형상을 결정하였다. General Comfort Rating, Body Part Discomfort 등의 주관적 안락도 평가방법을 통하여 기존 자전거 안장과 본 연구를 통해 개발된 안장을 비교 평가한 결과, 전반적인 안락도의 향상과 좌골결절 및 치골 결합부의 discomfort 감소효과를 가져온 것으로 파악되었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.214-220
• /
• 2009

The spindle is the main component in machine tools. The static and dynamic stiffness of the spindle directly affect the machining productivity and surface integrity of the workpiece. The static and dynamic stiffness of the spindle depend on the shaft size, bearing arrangement, bearing span length, and so on. Therefore, the selection of shaft size and bearing span length are important to improve the spindle stiffness. This paper presents the determination of shaft size and bearing span length in spindle design step. In order to select the optimal bearing and built-in motor locations with constraint conditions, the extreme vertices design was applied. The results show that extreme vertices design is usable for spindle design with design constraints.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.909-913
• /
• 2012

본 연구는 XP-SWMM 2011 모형의 최적 해석범위설정과 월류에 의한 2차원 지표유출량을 포함한 도시유역의 총 유출량 산정에 대한 방법을 연구한 것이다. 하수 및 우수 관망 해석 모형으로 1차원 관로해석과 2차원 지표면 해석이 가능한 XP-SWMM 2011 모형을 이용하였으며, 연구의 대상지역은 최근 연속적인 침수 피해를 일으켰던 광화문 일대로 선정하였다. 발생가능한 빈도별 지속시간별 확률강우량은 Huff의 4분위법을 이용하여 10분 간격으로 분포시켰으며, 기존의 유역 출구점에 기준한 설계기준의 문제점을 제시하고, 월류에 의한 2차원 지표유출수를 포함한 유역 내에서의 총 유출량 산정에 대한 방법을 제시하였다. 모의 결과분석시 기존의 제한된 격자확장 경계조건으로 인한 문제점 극복을 위해 해석범위 설정 시 적합한 격자경계의 설정이 필요함을 확인하였다. 도시유역의 관로유출량과 본 연구에 제시된 지표유출량을 함께 고려한다면 치수계획규모를 설정하는데 주요 판단기준으로 활용될 수 있을 것이다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.59-67
• /
• 2015

When planning for streams, adequate and definite flood control should be in the primary consideration of the planner; likewise, flood control is the basic prerequisite for the recent river restoration taking place nationwide. Planning 'safe' streams and rivers that are predictable and controllable begins from accurate survey data. In this research, we will create streams in 3D terrain models and apply them through hydraulic analysis and restoration using smart geospatial information. This process allows the extraction of more accurate data regarding streams and rivers, which makes possible precise hydraulic analysis that is superior in details to the conventional methods. The study also proposes optimal vertical section interval for efficient data processing on hydraulic analysis, applicable when LiDAR data is utilized on hydraulic analysis of urban streams. The study proposes 3D design plan and various applications for spatially planning and restoring rivers and streams.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.605-618
• /
• 2018

Korea follows the slope design criteria during construction. It was enacted by the Ministry of Land, Transport and Maritime Affairs. There are cases where the Soil-nail is designed as a measure to secure slope stability. The arrangement of the soil-nail may be arranged at equal intervals or may be arranged differently depending on the soil failure model. The optimum design of the countermeasure method is determined by securing stability of the slope through optimization of dimensions and shape. However, when uniform nails are placed at low elevations in slopes, the standard safety factor is exceeded, which may hinder economic design. It is preferable to arrange the reinforcement of the nails over the entire slope. When the horizontal spacing of the nails was topology optimized according to the slope height, it was possible to minimize the amount of reinforcement while satisfying the standard safety factor. Since the active load is reduced in the section where the slope height is lowered, the safety factor after reinforcement may be excessively increased. Therefore, the phase optimization method is proposed as an economical optimal design method using the reinforcing shape density. In addition, a relational expression was designed to optimize the horizontal spacing by slope height.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.6-11
• /
• 2009

최근 경제발전과 산업화를 통한 도시화로 인하여 많은 자연하천이 심하게 훼손되고 있으며 도시하천의 경우 치수의 효율성을 강조한 하천정비를 실시함으로써 하천의 외경은 깨끗하게 바꾸어 놓았지만 그로 인한 하천생태계의 파괴가 문제점으로 대두되고 있다. 이에 따라 생태적으로 훼손된 하천의 생태복원이 최근 들어 활발히 추진되고 있으며 하천변의 식물 및 어류 등 다양한 생물에 대한 서식공간의 마련이 주요 이슈로 연구되어지고 있다. 본 연구에서는 2차원 수리서식모형인 River2D를 대표적인 도시하천인 대전천에 적용하여 대전천의 멸종위기에 처해 있는 감돌고기 및 우점종인 피라미를 대상으로 대상 어류의 서식처 제공을 위한 수리학적 분석을 시도하였다. 또한 자연친화적 서식처 개선 공법으로서 거석을 하도 내에 배치함에 따른 가중가용면적의 변화를 비교 검토하였으며 감돌고기를 위한 최적의 서식처 개선 방안을 제시하였다. 현재 상태의 대상하천에 대한 어류서식처를 모의분석한 결과, 현재 직선화되고 단조로운 하천흐름은 피라미의 서식환경에 적합한 것으로 나타났으며 가중가용면적의 경우 감돌기에 비하여 피라미가 약 20배정도 크게 나타났다. 어류서식처 조성공법의 WUA를 산정한 결과 V형 여울공법이 감돌고기의 서식환경을 360%, 징검다리 거석공법이 60%, 외톨이 거석공법이 8%이상 상승시키는 것으로 나타났다. 반면, 거석(Boulder)을 적절히 배치하여 서식처를 개선하는 방법의 경우에도 거석간 간격을 3.5m로 하여 배치하는 경우가 가장 효율적인 것으로 나타났으며 거석을 이용한 여러 가지의 배치형태 중에서 수류를 중앙으로 집중시켰을 때 감돌고기의 서식처가 급격하게 상승하는 것으로 나타났다. 따라서 하도 내 거석의 배치시 하도 및 대상어종의 특성을 고려하여 적절한 배치간격 및 배치방법을 연구하여 시행되어야 할 것이다.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.53-58
• /
• 2017

This paper presents the design and fabrication of a planar nano-diffraction grating for an integrated miniature spectrometer module. The proposed planar nano-diffraction grating consists of nonuniform periods, to focus the reflected beams from the grating's surface, and an asymmetrical V-shaped groove profile, to provide uniform diffraction efficiency in the wavelength range from 400 to 650 nm. Also, to fabricate the nano-diffraction grating using low-cost UV-NIL technology, we analyzed the FT-IR spectrum of a uvcurable resin and optimized the conditions for the UV curing process. Then, we precisely fabricated the polymeric nano-diffraction grating within 5 nm in dimensional accuracy. The integrated spectrometer module using the fabricated polymeric planar nano-diffraction grating provides spectral resolution of 5 nm and spectral bandwidth of 250 nm. Our integrated spectrometer module using a polymeric planar nano-diffraction grating serves as a quick and easy solution for many spectrometric applications.