• Journal of dental hygiene science
• /
• v.6 no.3
• /
• pp.159-162
• /
• 2006

This study examined the relationship between the quantity of Streptococcus mutans and Lactobacillus spp. related to dental caries and the degree of acidity in saliva. A total of 240 saliva samples were taken from 80 subjects at the faculty of dentistry in Skopje, Macedonia. The saliva samples were taken by stimulating saliva production stimulation with paraffin chewing. However, no stimulation was applied when obtaining the samples used for measuring the pH. The data showed that in the caries group, S. mutans in 1 ml of saliva formed colonies with confluent growth (CFU > $10^6$ and $10^4-10^5$) in 100% of samples, whereas the Lactobacillus spp. formed colonies with confluent growth in 78.3%. In contrast, no colonies with confluent growth (CFU > $10^6$ and $10^5$) were found in the control group (with healthy intact teeth). In the caries group, the pH of the saliva was slightly acidic (pH = 5.90 - 6.50) and the buffering capacity was very low (below 0.7 ml of saliva per min). On the other hand, the pH of the saliva in the control group was neutral (pH 7.01 - 7.7) and the buffering capacity was high (over 1 ml of saliva per min). The increased number of S. mutans and Lactobacillus spp. in 1 ml of saliva (above $10^5$ CFU or more) from the CRT (Caries Risk Test, Vivadent, Liechtenstein) bacteria test can indicate an increased caries risk as well as slightly higher acidity of the saliva. Overall, these results reveal that the caries risk can be predicted by simply measuring the pH and buffering capacity of saliva, and can be used to monitor the effect of dental hygiene practices with the aim of preventing dental caries.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.470-478
• /
• 2004

The purpose of this study is to monitor the secretion of matrix metalloproteinase-1 (MMP-1) and tissue inhibitor of metalloproteinase-1 (TIMP-1) produced by human osteosarcoma cell line (MG63) stimulated with Prevotella nigrescens lipopolysaccharides (LPS). and to compare the level of secretion before and after the treatment of calcium hydroxide on P. nigrescens LPS. LPS was extracted and purified from anaerobically cultured P. nigrescens. MG63 cells were stimulated by the LPS (0, 1, $10{\;}\mu\textrm{g}/ml$) or LPS($10{\;}\mu\textrm{g}/ml$) pretreated with 12.5 mg/ml of $Ca(OH)_2$ for 3 days. Total RNA was isolated from the cell. and real-time quantitative polymerase chain reaction (PCR) was performed for quantification of MMP-1 and TIMP-1. The results were as follows. 1. MMP-1 mRNA expression at 48 hr was highly increased by stimulation with P. nigrescens LPS. The increase was dose-dependent. 2. When stimulated with ($1{\;}\mu\textrm{g}/ml$ of LPS. TIMP-1 mRNA expression was highly increased at 24 hr and 48 hr. However. TIMP-1 expression was suppressed at higher concentration ($10{\;}\mu\textrm{g}/ml$). 3. When P. nigrescens LPS was pretreated with $Ca(OH)_2$. MMP-1 and TIMP-1 gene expression was downregulated. The results of this study suggest that transcriptional regulation of MMP-1 and TIMP-1 by P. nigrescens LPS could be one of the important mechanisms in bone resorption of periapical inflammation. The result of calcium hydroxide on MMP-1 and TIMP-1 gene expression suppression shows that calcium hydroxide detoxified bacterial LPS and thus should be used the medication of choice for intracanal dressings in root canal infected with black-pigmented bacteria.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.188-195
• /
• 2011

Objectives: The purpose of this study was to evaluate the polymerization shrinkage stress among conventional methacrylate-based composite resins and a silorane-based composite resin. Materials and Methods: The strain gauge method was used for the determination of polymerization shrinkage strain. Specimens were divided by 3 groups according to various composite materials. Filtek Z-250 (3M ESPE) and Filtek P-60 (3M ESPE) were used as a conventional methacrylate-based composites and Filtek P-90 (3M ESPE) was used as a silorane-based composites. Measurements were recorded at each 1 second for the total of 800 seconds including the periods of light application. The results of polymerization shrinkage stress were statistically analyzed using One way ANOVA and Tukey test (p = 0.05). Results: The polymerization shrinkage stress of a silorane-based composite resin was lower than those of conventional methacrylate-based composite resins (p < 0.05). The shrinkage stress between methacrylate-based composite resin groups did not show significant difference (p > 0.05). Conclusions: Within the limitation of this study, silorane-based composites showed lower polymerization shrinkage stress than methacrylate-based composites. We need to investigate more into polymerization shrinkage stress with regard to elastic modulus of silorane-based composites for the precise result.

• Journal of Oral Medicine and Pain
• /
• v.37 no.4
• /
• pp.233-242
• /
• 2012

The purposes of this study were to compare psychological profiles, to investigate the differences in the clinical characteristics, and to compare treatment outcomes between myogenous pain and arthrogenous pain subgroups of temporomandibular disorder (TMD) based on Research Diagnostic Criteria for Temporomandibular disorders (RDC/TMD). Two hundred and fifty two patients diagnosed as TMD were divided into three groups based on the RDC/TMD axis I diagnostic guidelines; myogenous pain group, arthrogenous pain group, and mixed pain (both myogenous pain and arthrogenous pain) group. RDC/TMD history questionnaire was administered to each patient and depression, somatization, jaw disability, pain intensity, disability days, and graded chronic pain scale were analyzed. Bruxism, clenching, insomnia, headache, and unilateral chewing were assessed in a standardized TMD dysfunction questionnaire and the duration of onset, chronicity of pain, treatment period, the effectiveness of the treatment, and improvement of symptoms also analyzed. Myogenous pain group had higher depression (p=0.002), and somatization scales (p<0.001) than the arthrogenous pain group. Mixed pain group showed higher pain intensity (p=0.008), disability days (p<0.001), graded chronic pain scale (p=0.005), somatization (p<0.001), and depression scores (p=0.002) than the arthrogenous pain group. Jaw disability did not show any significant differences among the three groups (p=0.058). Arthrogenous pain group reported more limitation of mouth opening than myogenous pain group (p=0.007). Duration of onset showed that the arthrogenous pain group had lowest prevalence of chronicity among three groups (p=0.002). Mixed pain group patients showed lowest symptom improvements among three groups (p=0.007). Multiple linear regression analysis results showed that the treatment effectiveness was significantly associated with somatization score (${\beta}$=-0.251, p=0.03).

• Journal of Oral Medicine and Pain
• /
• v.33 no.2
• /
• pp.159-166
• /
• 2008

An ideal anti-bacterial medication for oral infection requires selective effect on pathogens causing dental caries and periodontal disease but not on normal flora. In addition, it should be less toxic for human and even for environment. This study was to seek such a natural anti-bacterial medication and thus anti-bacterial effect of Hamamelis virginiana was evaluated. Many recent researches on the anti-bacterial effect of natural plant extract and essential oil have reported that natural products can be used as medication for prevention and restrainment of dental caries, halitosis and periodontitis. It has been also reported that Hamamelis virginiana has anti-bacterial effect on Porphyromonas gingivalis, Fusobacterium nucleatum, Capnocytophaga gingivalis, Veilonella parvula, Eikenella corrodens, Peprostreptococcus micros, and Actinomyces odontolyticus. This study evaluated anti-bacterial effect of Hamamelis virginiana on Streptoccoccus mutans, Haemophylus actinomycetemcomitans, and Klebsiella pneumoniae to expand its anti-bacterial effect on other important oral pathogens and eventually to develop its oral care products or apply to clinical purpose. In this study, anti-bacterial tests for antibiotic disk susceptibility, minimal inhibitory concentration and minimal bactericidal concentration were performed to evaluate anti-bacterial effect of Hamamelis virginiana against Streptoccoccus mutans, Haemophylus actinomycetemcomitans, and Klebsiella pneumoniae. The results showed that Hamamelis virginiana has anti-bacterial effect on all pathogen strains tested in this study and furthermore Hamamelis virginiana possesses bactericidal effect other than bacteriostatic effect on Streptoccoccus mutans, Haemophylus actinomycetemcomitans, Klebsiella pneumoniae. This study indicates that a natural anti-bacterial medication for oral diseases can be developed using Hamamelis virginiana.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.272-283
• /
• 2016

This study compared and analyzed the occluding effects of fluoride compounds and desensitizers, which are commonly used in dental clinics, on dentinal tubules. This study also evaluated the persistence of the active ingredients over time by performing toothbrushing with an electric toothbrush. Thirty-five molar teeth, which had been extracted within the past 3 months from healthy people without tooth decays, amalgam fillings, or dental crowns, were divided into 4 pieces each. Of these, 135 teeth pieces were used as study specimens. These specimens were divided into a control group, an untreated group, and 5 experimental groups (acidulated fluoride gel, fluoride varnish, Gluma, Super Seal, and SE-Bond). The specimens were then subjected to toothbrushing equivalent to 1 week (140 times), 2 weeks (280 times), and 4 weeks (560 times), and the occluding effects on dentinal tubules in 3 regions of each specimen were examined under a scanning electron microscope. The fluoride varnish treated group showed the highest degree of dentinal tubule occlusion effects during the first, second, and fourth weeks of toothbrushing, with the SE-Bond treated group showing the second highest degree and the Gluma treated group showing the lowest degree. After 4 weeks of toothbrushing, the Gluma treated group and the Super Seal treated group showed the lowest degrees of dentinal tubule occlusion effects. In summary, the fluoride varnish treated group and the SE-Bond treated group displayed higher occlusion effects even after 4 weeks of treatment than did the other experimental groups. Therefore, it is the authors' belief that fluoride varnish and SE-Bond are effective for treating dentinal hyperesthesia.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.284-292
• /
• 2016

Water supplied through dental unit waterlines (DUWLs) has been shown to contain high number of bacteria. To reduce the contamination of DUWLs, it is essential to develop effective disinfectants. It is, however, difficulty to obtain proper DUWL samples for studies. The purpose of this study was to establish a simple laboratory model for reproducing DUWL biofilms. The bacteria obtained from DUWLs were cultured in R2A liquid medium for 10 days, and then stored at $-70^{\circ}C$. This stock was inoculated into R2A liquid medium and incubated in batch mode. After 5 days of culturing, it was inoculated into the biofilm formation model developed in this study. Our biofilm formation model comprised of a beaker containing R2A liquid medium and five glass rods attached to DUWL polyurethane tubing. Biofilm was allowed to form on the stir plate and the medium was replaced every 2 days. After 4 days of biofilm formation in the laboratory model, biofilm thickness, morphological characteristics and distribution of the composing bacteria were examined by confocal laser microscopy and scanning electron microscopy. The mean of biofilm accumulation was $4.68{\times}10^4$ colony forming unit/$cm^2$ and its thickness was $10{\sim}14{\mu}m$. In our laboratory model, thick bacterial lumps were observed in some parts of the tubing. To test the suitability of this biofilm model system, the effectiveness of disinfectants such as sodium hypochlorite, hydrogen peroxide, and chlorhexidine, was examined by their application to the biofilm formed in our model. Lower concentrations of disinfectants were less effective in reducing the count of bacteria constituting the biofilm. These results showed that our DUWL biofilm laboratory model was appropriate for comparison of disinfectant effects. Our laboratory model is expected to be useful for various other purposes in further studies.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.3
• /
• pp.225-235
• /
• 2009

A common procedure of restoration of endodonticlly treated tooth with fiber-reinforced post is followed by core build-up after post cementation. However, this technique is complex and time-consuming. The aim of this study was to compare fracture strength of premolar, restored with various methods of core fabrications on fiber-reinforced posts and casting metal restoration. Forty five freshly extracted human mandibular premolars were obtained and devided into 5 groups acconding to the type of post and methods of core build-up. In Group A, D.T. $Light-post^{(R)}$ were cemented with $DUO-LINK^{TM}$ and then $LIGHT-CORE^{TM}$ was used for core restoration. In Group B, D.T. $Light-post^{(R)}$ and $DUO-LINK^{TM}$ were used for cementing in the postspace, and $DUO-LINK^{TM}$ was used again for core restoration. In Group C, $Light-post^{(R)}$ bonding and the core build-up were performed simultaneously by using $DUO-LINK^{TM}$. In Group D, $LuxaPost^{(R)}$ was bonded by using $LuxaCore^{(R)}-Dual$. Again, $LuxaCore^{(R)}-Dual$ was used for core restoration. In Group E, $LuxaPost^{(R)}$ bonding and the core build-up were performed simultaneously by using $LuxaCore^{(R)}-Dual$. Axial reduction was formed parallelly as possible and 45 degree bevel was made at buccal occlusal surface. Crowns were fabricated and cemented. Each tooth was embedded in self-curing acrylic resin to the level of 2mm below the CEJ. Specimens were fixed on universal testing machin such that the axis of the tooth was at 45 degree inclination to the horizontal plane, and compressive force was applied at a crosshead speed of 1mm/min until failure occurred. The mean fracture strength was the highest in group A followed by descending order in group B, D, E and C. However, there were no statistically significant differences between groups with regard to the fracture strength. The type of the post or build-up methods of the core does not seem to influence the fracture strength.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.169-181
• /
• 2008

The aim of this study was to compare the retention and stability of implant overdenture according to the shape and the number of magnetic attachment. The experimental groups were designed for the number of implants(1, 2, 4) and shape of magnetic attachments(flat, cushion, dome type) resulting in 9 subgroups. 45 attachments were tested attached to $Br{\aa}nemark$ system implants which were planted on a mandibular model. Each attachment was composed of the magnet assembly embedded in a overdenture sample and the abutment keeper screwed into the implants. Dislodging tensile forces were applied to the overdenture samples using an Instron(cross-head speed 50.80mm/min) in 3 directions simulating function: vertical, oblique, and anterior-posterior. The loading was repeated 10 times in each direction for 45 samples. The values of maximum dislodging force of each subgroup were processed statistically using SPSS V. 12.0 at the 0.05 level of significance. The results of this study were as follows: 1. Flat type magnetic overdenture was the most retentive when subjected to vertically directed forces and dome type was the lest retentive when subjected to obliquely directed forces(p<0.05). 2. In case of planting one implant, flat type had a higher vertically retentive force than anterior-posteriorly retentive force. In case of planting two implants, flat type and dome type had a higher vertically retentive force and in case of planting four implants, flat type and cushion type had a higher vertically retentive force than anterior-posteriorly retentive force(p<0.05). 3. The incremental number of dental implant, without regards to the three types of magnetic attachment shapes, showed higher retention of overdenture(p<0.05). From the results, if a patient need much more retention of implant overdenture, flat type magnetic overdenture would be a good treatment. In case of the bruxism where excessive lateral forces are already present, dome type could be expected to produce better results. In case of planting one implant, flat type is more stable than the other shape of magnet and in case of two implant, flat type and dome type are more stable and in case of four implants, flat type and cushion type are more stable. Planting more than two implants and using flat type magnetic attachment would provide better retention and stability of implant overdenture

• Journal of dental hygiene science
• /
• v.11 no.5
• /
• pp.389-395
• /
• 2011

The purpose of this study was to examine dental hygiene students' achievement motivation and factors affecting dental hygiene students' achievement motivation by the general characteristics of subjects in this study. The subjects in this study were 450 who were selected by convenience sampling from three different three-year-course colleges. After a survey was conducted, the answer sheets from 421 respondents were analyzed. The collected data were analyzed, which made use of t-test, ANOVA and Kruscal-Wallis test. The findings of the study were as follows. 1. The dental hygiene students investigated got 3.34 in achievement motivation. They got the highest score of 3.78 in the item 'I perform what I have to do with a sense of responsibility.' and they got the lowest score of 2.67 in the item 'I like to do something risky.' 2. Concerning links between their general characteristics and achievement motivation, the students whose academic year was higher(p<0.001) and who had more clinical practice experiences (p<0.01) were better motivated than their counterparts. As to connections between achievement motivation and expected post-graduation length of service, those who replied that they planned to find another job after getting married were better motivated(p<0.05). Regarding relationship between achievement motivation and a will to work abroad, the students who had a stronger will to work abroad were better motivated. 3. As a result of checking the influence of their general characteristics on achievement motivation, stronger motivation was found among the students whose academic year was higher(p<0.01), who intended to work until marriage(p<0.01) and who didn't plan to keep working after marriage(p<0.05) when the other variables were controlled. Therefore dental hygiene students should be taught to look at things positively when they enter college, and they should also be educated to become progressive to keep working for their lifetime instead of just getting a temporary job after graduation.