• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.3
• /
• pp.149-157
• /
• 1998

Seasonal changes of topography, sediment grain size and accumulation rate in the Gomso-Bay tidal flat, west coast of Korea, have been studied in order to understand the seasonal accumulation pattern and preservation potential of the tidal-flat sediments. Seasonal levelings across the tidal flat show that the landward movement of both intertidal sand shoals and cheniers accelerates during the winter and typhoon periods, but it almost stops in summer when mud deposition is instead predominant at the middle and upper tidal flats. Seasonal variations of mean grain size were largest on the upper part of middle tidal flat where summer mud layers were eroded during the winter and typhoon periods. Measurements of accumulation depths from sea floor to basal plate reveal that accumulation rates were seasonally controlled according to the elevation of tidal-flat surface. The upper tidal flat where the accumulation rate of summer was generally higher than that of winter was characterized by a continuous deposition throughout the entire year, whereas in the middle tidal flat, sediment accumulations were concentrated in winter relative to summer and were intermittently eroded by typhoons. The lower tidal flat were deposited mostly in winter and eroded during summer typhoons. Can cores taken across the tidal flat reveal that sand-mud interlayers resulting from such seasonal changes of energy regime are preserved only in the upper part of the deposits and generally replaced by storm layers downcore. Based on above results, it is suggested that the storm deposits by winter storms and typhoons would consist of the major part of the Gomso-Bay sediments.

• 한국석유지질학회:학술대회논문집
• /
• 2005.09a
• /
• pp.94-100
• /
• 2005

동해 울릉분지 북서부해역에서 채취한 코어퇴적물을 이용하여 울릉분지의 제4기 후기 층서와 퇴적환경을 연구하였다. 이를 위하여 테프라층서, 탄소연대측정, 퇴적상, 퇴적물의 암질, 퇴적물과 공극수의 원소성분 등을 분석하였다. 퇴적상을 기준으로 코어퇴적물은 Unit 1, Unit II 및 Unit III으로 나누어지며, Unit의 경계부근에서는 주로 화산력으로 구성된 2매의 향암질 또는 조면암질 테프라층과 주로 화산재로 구성된 1매의 유문암질 테프라층이 협재되어 나타난다. 이들 테프라층에는 울릉도에서 기원한 울릉-오키층(Unit I/II 경계, 약 8.1 cal. kyr BC)과 울릉-야마토층(약 30.7 cal. kyr BC), 일본에서 기원한 아이라-탄자와층(Unit I/II경계, 약 22.8 cal. kyr BC)이 있다. Unit II의 중간부근에서 발견되는 DLM(Dark Laminated Mud) 층에는 망간보다는 철이 상대적으로 풍부하고, 철은 주로 구상집적체의 황화철로 발견되는데, 이들 광물은 정체환경 동안 물의 순환이 약화된 시기에 무산소환경에서 형성되었다. 퇴적물 내 유기물은 해양성 기원으로, 열적 성숙단계가 대부분 미성숙단계에 놓여 있다. Termination I 전에 급격하게 총유기탄소 (TOC)의 함량이 증가함을 보여주는데, 이는 빙기에서 간빙기로 변하는 시기에 해수면 변동과 관련이 있는 것으로 보인다. 공극수와 공기층 가스의 분석에 의하면, 황산염($SO_4^{2-}$) 농도는 매몰심도와 함께 증가하고, 반대로 공기층 가스의 주성분인 메탄($CH_4$)의 농도는 감소한다. 이는 미생물학적인 활동과 관련된 황산염 환원작용이 코어 상부에서 일어났으며, 점차 메탄생성단계 (methanogenesis)로 전이가 일어났음을 의미한다.측해본 결과 침몰선체의 강도는 초기강도에 비해 약 2/5정도 감소하였음을 알 수 있었다.할 수 있었다. 이 연구 사례를 통하여 3차원 GPR 탐사 또한 국부적인 이상대의 규명뿐만 아니라 광역적인 고고학 조사에도 다른 물리탐사와 마찬가지로 쉽게 활용될 수 있다는 결론을 얻을 수 있었다. 3차원 GPR 탐사가 향후 국내의 문화재 조사에 표준화된 탐사과정 중의 하나로써 적극 활용되길 기대한다.larity가 높은 oil에서는 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분이 하루 세끼 식사를 규칙적으로 하고 있었으며 식사속도는 허겁지겁 빨리 섭취하는 경우가 남자는 $31.0\%$, 여자는 $21.4\%$로 나타났고 이들을 제외한 나머지 사람들은 보통 속도 혹은 충분한 시간을 가지고 식사를 하였다. 평소 식사량은 조금 적게

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.17-27
• /
• 2014

We investigated space-time patterns of Quaternary fault activity of the Yangsan fault zone using ESR ages in the Samnam-myeon region, Ulsan, Korea. Some of fault gouge zones consist of well-defined bands which added to the older gouge band, indicative of reactivation. During addition of new bands, the older gouge band was inactive, which represents the type I faulting mode. ESR analyses of each band of the gouge zone allow us to construct history of fault movement. The entire fault gouge zones were reactivated by type III faulting mode giving us ESR ages of the lastest reactivation. ESR dates show temporal clustering into active and inactive periods analogous to historic and paleoseismic fault activities. ESR ages and dates of fault movements indicate migration of fault activities along the Yangsan Fault Zone. Segments of the Quaternary faults in the study area are branched in the south of Sangcheon site. The earliest record of activity in segmented faults is recorded from the western segment to the northern segment. Before 750~850 ka ago, the fault gouge zone from the western segment to the northern segment were active. At 750~850 ka ago, the fault gouge zone from the eastern segment to the northern segment were active. During 630~660 ka and 480~540 ka only the northern segment was active. After 340 ka ago, the fault gouge zone from the western segment to the northern segment were active again.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.511-519
• /
• 2005

A method for determination of toluene diisocyanates (TDI) in toluene diisocynate (TDI)-based polyurethane (PUR) packing material was investigated, and also the migration of TDI to food was studied. TDI was extracted using food simulants such as n-haptane and 4% aqueous acetic acid. The determinations were performed using gas chromatography/mass spectrometry (GC/MS). One of major components for polyurethane, toluene diisocyanates, were detected in ten samples among twenty six food contact materials with the concentration range of $0.51{\sim}60.88{\mu}g/ml$. However the highest extracted amount was just 0.7% of $60.88{\mu}g/ml$ if the contact surface of food packing for extracting liquid was limited to the outer layer without exposure of the cutting edge of food packing multi-layers. The result of this study and the analysis method for TDI diisocyanate will be very useful for further study about food contact material, and the monitoring result could be used for evaluating the safety of food contact material before it is to be used for food, preservation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1015-1022
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) antenna with aperture coupled feeding structure for private network. The proposed antenna has general aperture coupled structure and design two port between top and bottom layer to obtain the enhanced isolation. Also, The size of each substrate(top and bottom layer) is 34.0 mm(W)×34.0 mm(L), which is designed on the FR-4 substrate which thickness (h) is 1.0 mm, and the dielectric constant is 4.4. Also, the size of patch antenna is 12.70 mm(W2)×14.60 mm(L3), and it is located on the top layer. The size of feeding line is 24.0 mm(W2)×1.6 mm(L3), and is located at the bottom layer Also, rectangular slot is located on the ground plane between top layer and bottom layer. From the fabrication and measurement results, bandwidths of 300 MHz (4.52 to 4.82 GHz) for feeding port 1, and 170 MHz (4.65 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -30 dB. Also, cross polarization isolation between each feeding port obtained

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.161-172
• /
• 2023

Autonomous driving vehicles recognize the surroundings through various sensors mounted on the vehicle and control the vehicle based on the collected information. The level of autonomous driving technology is improving due to the development of sensor technology and algorithms that process collected data, but the implementation of perfect autonomous driving technology has not been achieved. To overcome these limitations, through autonomous cooperative driving centered on infrastructure. In this study, developed a position correction sign that provides a reference for positioning of autonomous vehicles. First of all, an analysis was performed on the current status of positioning technology for autonomous driving. And measure the number of point clouds for the 1st sample consisting of two square reflective surfaces and 2nd sample that increased the vertical length of each reflective surface. Experimental results show that both primary and secondary products are installed at least 15 m apart It could be recognized as a sensor, and it was confirmed that the secondary production that increased the length of the top and bottom had a higher number of point clouds than the primary production and better expressed the shape of the facility.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.419-426
• /
• 2009

Purpose : The aim of this study was to evaluate the difference of bone mineral density according to distal radius rotation and to develop the supporting tool to measure rotation angles. Materials and Methods : CT scanning and the measurement of BMD by DXA of the appropriate position of the forearm were performed on 20 males. Twenty healthy volunteers without any history of operations, anomalies, or trauma were enrolled. The CT scan was used to evaluate the cross sectional structure and the rotation angle on the horizontal plane of the distal radius. The rotational angle was measured by the m-view program on the PACS monitor. The DXA was used in 20 dried radii of cadaveric specimens in pronation and supination with five and ten degrees, respectively, including a neutral position (zero degrees) to evaluate the changes of BMD according to the rotation. Results : The mean rotation angle of the distal radius on CT was 7.4 degrees of supination in 16 cases (80%), 3.3 degrees of pronation in three cases (15%), and zero degree of neutral in one case (9%), respectively. The total average rotation angle in 20 people was 5.4 degrees of supination. In the cadaveric study, the BMD of the distal radius was different according to the rotational angles. The lowest BMD was obtained at 3.3 degrees of supination. Conclusion : In the case of the measurement of BMD in the distal radius with a neutral position, the rotational angle of the distal radius is close to supination. Pronation is needed for the constant measurement of BMD in the distal radius with the rotation angle measuring at the lowest BMD and about five degrees of pronation of the distal radius is recommended.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.435-441
• /
• 2002

Surgical microscrews were introduced and used as one method to provide absolute anchorage. Some clinicians implanted microscrews or miniscrews into the basal bone below the roots of the teeth to evade damage to the roots. Because the implanted microscrews were positioned too low the applied force was insufficient to retract the anterior teeth or protract the posterior teeth, and the use of microscrews or miniscrews seemed limited in applying vertical force. However Park implanted microscrews(micro-implants (1.2mm in diameter)) into the alveolar bone between the roots of the posterior teeth to change the direction of the applied force toward increasing horizontal component of the force. Moreover, these microscrew implants were positioned in the alveolar bone between the roots without causing discernable damage to the roots. This study was performed to provide guidelines and anatomic data to assist in the determination of the safe location for micro-implants. By measuring the CT images from 21 patients, anatomical data were obtained which were then used as a guide to determine the location for the implantation of micro-implants. The thickness of the cortical bones at the alveaolar bone region increased from the anterior to the posterior teeth area. The mandibular posterior teeth area showed thicker cortical bone. A greater distance was observed in distance between the second premolar root and first molar root in the upper arch, between the first molar root and the second molar root in the lower arch. The alveolar bone of the posterior teeth area is considered the best site for the implantation of micro-implants.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.163-171
• /
• 2005

Current roads were designed and constructed based on the design criteria and thus those were overly simplified drivers' needs. The road criteria do not suggest the desirable range of the design values but suggest the minimum requirements for the road design. Therefore, a completed road design based on the design criteria does not always guarantee the best design in terms of safety and it sometimes violates drivers' expectation. Therefore, the ROSSAV(ROad Safety Survey and Analysis Vehicle) is being developed by the KICT to evaluate road safety and increase driving safety. In this paper, the image capture system was described in detail. The image capture system is consisted of two front view cameras, two side down-looking cameras and a synchronization device. Two front view cameras were used to take a picture of road and road facilities at the driver's viewpoint. Also, two side down-looking cameras were used to capture road surface image to extract lane markings. A synchronization device were used to generate image capturing signal at the fixed distance spacing huck as every 10m. The front view images could be used to calculate and measure highway geometry such as shoulder width because every image is saved with it's locational information. And also the side down looking images could be used to extract median lane mark which representing road alignement efficiently.

• Journal of Information Management
• /
• v.31 no.4
• /
• pp.50-70
• /
• 2000

Since the contents of internet resources are beginning to include texts, images and sounds, different Web-based image search engines have been developed accordingly. It is a fact that these diversities of multimedia contents have made search process and retrieval of relevant information very difficult. The purpose of the study is to compare and evaluate its special features and performance of the existing image search engines in order to provide user help to select appropriate search engines. The study selected AV Photo Finder, Lycos MultiMedia, Amazing Picture Machine, Image Surfer, WebSeek, Ditto for comparison and evaluation because of their reputations of popularity among users of image search engines. The methodology of the study was to analyze previous related literature and establish criteria for the evaluation of image search engines. The study investigated characteristics, indexing methods, search capabilities, screen display and user interfaces of different search engines for the purpose of comparison of its performance. Finally, the study measured relative recall and precision ratios to evaluate their electiveness of retrieval under the experimental set up. Results of the comparative analysis in regard to its search performance are as follows. AV Photo Finder marked the highest rank among other image search engines. Ditto and WebSeek also showed comparatively high precision ratio. Lycos MultiMedia and Image Surfer follows after them. Amazing Picture Machine stowed the lowest in ranking.