• Journal of the Korean Geotechnical Society
• /
• v.26 no.12
• /
• pp.19-30
• /
• 2010

Bentonite-based grout has been widely used to seal a borehole constructed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because of its high swelling potential and low hydraulic conductivity. Three types of bentonites were compared one another in terms of viscosity and thermal conductivity in this paper. The viscosity and thermal conductivity of the grouts with bentonite contents of 5%, 10%, 15%, 20% and 25% by weight were examined to take into account a variable water content of bentonite grout depending on field conditions. To evaluate the effect of salinity (i.e., concentration of NaCl : 0.1M, 0.25M, and 0.5M) on swelling potential of the bentonite-based grouts, a series of volume reduction tests were performed. In addition, if the viscosity of bentonite-water mixture is relatively low, particle segregation can occur. To examine the segregation phenomenon, the degree of segregation has been evaluated for the bentonite grouts especially in case of relatively low viscosity. From the experimental results, it is found that (1) the viscosity of the bentonite mixture increased with time and/or with increasing the mixing ratio. However, the thermal conductivity of the bentonite mixture did not increase with time but increased with increasing the mixing ratio; (2) If bentonite grout has a relatively high swelling index, the volume reduction ratio in the saline condition will be low; (3) The additive, such as a silica sand, can settle down on the bottom of the borehole if the bentonite has a very low viscosity. Consequently, the thermal conductivity of the upper portion of the ground heat exchanger will be much smaller than that of the lower portion.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.139-152
• /
• 2016

The comparative in vitro and in situ analysis were conducted to evaluate the rumen degradability and physical structure of domestic roughage as rice straw, timothy, alfalfa, wormwood and green tea. The feedstuffs incubated with rumen fluid and was used to determine gas production, microbial growth rate and pH changes in an in vitro experiment. The gas production was increased during incubation times and was significantly(p<0.05) lower in green tea than other feedstuffs. The microbial growth rate in the feedstuffs was increased during incubation times. However, microbial growth rate was significantly(p<0.05) lower in wormwood and green tea than other feedstuffs. Ruminal pH was decreased during incubation times, and timothy was the lowest, and rice straw was the highest among feedstuffs. The disappearance rate of dry matter(DM) and crude protein(CP) in all feedstuffs were increased during incubation times and green tea was the highest(p<0.05) compared with other feedstuffs. In effective degradability, when rumen out-flow rate was assigned to 4%, wormwood showed the highest in DM, and alfalfa was the highest in CP. Whereas, green tea was the highest in both in situ DM and CP degradability. Many cilia on the surface and stoma of wormwood and stoma in green tea were observed by scanning electron microscopy. Microbes breaked down the cilia at the beginning and then degraded the surface in wormwood. In case of green tea, microbes attached to stoma. Therefore, wormwood and green tea have a potential value as ruminal feed stuffs.

• Journal of Marine Life Science
• /
• v.2 no.1
• /
• pp.20-26
• /
• 2017

In this study, we evaluated the toxic effects of heavy metals (As, Cr and Pb) on the population growth rate (r) of the marine diatom, Skeletonema costatum. The r of the species was determined after 96 h (4 days) exposure to As (0, 0.31, 0.63, 1.25, 2.50 and 5.00 mg L^-1), Cr (0, 0.16, 0.31, 0.63, 1.25 and 2.50 mg L^-1) and Pb (0, 1.25, 2.50, 5.00, 10.00 and 20.00 mg L^-1). It was observed that r in the control (absence of As, Cr and Pb) were greater than 0.04, however suddenly decreased with increased heavy metal concentrations. As, Cr and Pb reduced r in a dose-dependent manner and a significant reduction were occurred at concentration of greater than 0.31, 0.31 and 5.00 mg L^-1, respectively. Based on the toxicity, the heavy metal were ranked as Cr>As>Pb, with EC₅₀ (50% effective concentration) values of 0.80, 2.57 and 13.88 mg L^-1, respectively. The lowest-observed-effective-concentration (LOEC) of r in exposed to As, Cr and Pb were 0.63, 0.63 and 10.00 mg L^-1, respectively. Precisely, a concentration of greater than 0.63 mg L^-1 of As, 0.63 mg L^-1 of Cr and 10.00 mg L^-1 of Pb in marine ecosystems induced toxic effect on the r of S. costatum. Based on our results, we suggested that the r of S. costatum might be a useful bio-indicator for the toxicity assessment of heavy metals on the producer in marine ecosystems.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.136-146
• /
• 2023

Biological materials, such as stuffed specimens, can release various acids or volatiles. There has been no research carried out on the emission characteristics of organic compounds generated from the preservatives used in taxidermy specimens or associated manufacturing materials and methods. Therefore, in order to identify the organic compounds generated from taxidermy specimens, a degradation experiment was conducted on specimens for each material and for storage specimens. To produce Ogye chicken specimens, naphthalene and borax were used as preservatives, and planer sawdust, newspaper, and polystyrene foam were used as the core body materials. The deterioration experiment was conducted for 2 weeks in a high-temperature environment(50℃) and a high-humidity environment (95%), with an Ogye chicken specimen (year 2015) kept in an animal storage facility. Results indicated that the concentration of organic compounds generated by the specimen in the high-temperature environment tended to be greater than that in the high-humidity environment. The preservatives benzene, toluene, xylene, and p-dichlorobenzene were detected in the specimens using naphthalene, confirming that naphthalene is a major organic compound release factor, and the specimens that used sawdust, newspaper, and polystyrene foam also exhibited organic compounds. This appears to have been due to degradation of the material. In addition, ammonia was detected in the specimens for each material due to decay. In particular, the specimens using borax at high temperature were subject to approximately 9 times higher rates of ammonia-related deterioration than the specimens using naphthalene. These results can be considered to result from the prevention of biological damage through insecticidal effects by accelerating the sublimation of naphthalene in a high-temperature environment. Naphthalene is a potentially carcinogenic substance, and when used as a preservative, proper use management is required. Taxidermy specimens can release various organic compounds depending on the manufacturing techniques used, so a systematic preservation management plan is required that depends on conditions such as the applicable manufacturing materials and preservatives.

• Knowledge Management Research
• /
• v.24 no.2
• /
• pp.241-262
• /
• 2023

The phenomena and game records that occur in sports matches are being analyzed in the field of sports game analysis, utilizing advanced technologies and various scientific analysis methods. Among these methods, social network analysis is actively employed in analyzing pass networks. As football is a representative sport in which the game unfolds through player interactions, efforts are being made to provide new insights into the game using social network analysis, which were previously unattainable. Consequently, this study aims to analyze the changes in pass networks over time for a specific football team and compare them in different scenarios, including variations in the game's nature (Qatar World Cup games vs. A match games) and alterations in the opposing team (higher FIFA rankers vs. lower FIFA rankers). To elaborate, we selected ten matches from the games of the Korean national football team following Coach Bento's appointment, extracted network indicators for these matches, and applied four indicators (efficiency, cohesion, vulnerability, and activity/leadership) from a football team's performance evaluation model to the extracted data for analysis under different circumstances. The research findings revealed a significant increase in cohesion and a substantial decrease in vulnerability during the analysis of game performance over time. In the comparative analysis based on changes in the game's nature, Qatar World Cup matches exhibited superior performance across all aspects of the evaluation model compared to A matches. Lastly, in the comparative analysis considering the variations in the opposing team, matches against lower FIFA rankers displayed superior performance in all aspects of the evaluation model in comparison to matches against top FIFA rankers. We hope that the outcomes of this study can serve as essential foundational data for the selection of football team coaches and the development of game strategies, thereby contributing to the enhancement of the team's performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.213-220
• /
• 2019

Desire for a happy life becomes the will that man instinctively desires. In that the conditions of happiness are subjective and varied, the will of subjective desires has been studied with the attention of objective tendencies. The positive and meaningful will of life in the desire for happiness leads us to be the functionaries who act. These wills can be the driving force of a happy life, which allows one to have a hopeful reflective will in one's inner life, connecting oneself with others, and working in relationships with others. In addition, those who become lazy or lose their orientation in life can instill a will to be the main character of life, and furthermore, to give the ultimate meaning and goals of life. To understand and analyze these wills for happy lives more specifically, structural model compatibility and confirmatory factors were conducted. relatively reliable α=.855 value, the coefficient of correlation between recognition and will **p<.01, *p<.05 statistically significant measuring tool of not less than 05 was used. The study results of the structural model suitability of the factors of will and the confirmatory factor analysis showed that the model set by the researcher could reflect the characteristics of the data collected, and that the χ²(Chi-square) value was .126, which was consistent with the model by satisfying the acceptance criteria, and that the comparison of the reference values of the study model showed a relatively high level of suitability. To identify the relationship between cognitive and defined and behavioral factors of subjective will and existent will variables, the results of a verification factor analysis show that the χ²(Chi-square) value is 2.36 and the model and data are consistent with the acceptance criteria, and that the test data is consistent with the model and data set by the researcher are consistent with the model5.0 Through structural model analysis of human will, it was confirmed that the variables of subjective and existential, sensible and reflective will directly and indirectly influence and form a complex relationship. Our will is recognized as the subjective will, and the structure of the subjective will consists of the sensible and reflective will, and the relationship between the cognitive and just action elements and the subjective will of the human life and the will to exist is shown to be very meaningful, so we should conduct the education of the happy will of the emotional and just areas of life as well as the reestablishment of the cognitive educational direction that can lead to action.

• Korean Journal of School Psychology
• /
• v.15 no.3
• /
• pp.399-431
• /
• 2018

The purpose of this study was to summarize the empirical literature on implementation of positive behavior support (PBS) within a multi-tiered system of supports in American and Korean schools and to compare its key features and outcomes in an attempt to suggest future directions for development of a Korean school-wide PBS model and implementation manuals as well as directions for future research. Twenty-four American articles and 11 Korean articles (total 35 articles) that reported the outcomes of implementation of PBS at a tier 1 and/or tier 2, or tier 3 level and that met established inclusion criteria were analyzed using systematic procedures. Comparisons were made in the areas of key features and outcomes of PBS in addition to general methodology (e.g., participants, design, implementation duration, dependent measures) at each tier of PBS. The results indicated that positive outcomes for student behavior and other areas were reported across tiers in all American and Korean studies. At the tier 1 level, teaching expectations and rules were the primary focus of PBS in American and Korean schools. However, Korean schools focused on modifying the school and classroom environments and teaching social skills whereas American schools focused on teacher training on standardized interventions or curricular by experts and teacher support during implementation of PBS. At the tier 2 level, more American studies reported implementation of tier 2 interventions within school-wide PBS, and Check/In Check/Out (CICO) was found to be the most commonly used tier 2 intervention. The results also indicated that in comparison to Korean schools, American schools were more likely to use systematic screening tools or procedures to identify students who need tier 2 interventions and more likely to promote parental involvement with implementing interventions. At the tier 3 level, more Korean studies reported the outcomes of individualized interventions, but more American studies reported that designing individualized intervention plans based on comprehensive functional behavior assessment results and establishment of systematic screening systems were focused when implementing individualized interventions. Furthermore, few Korean studies reported the assessment of procedural integrity, social validity, and contextual fit in implementing PBS across tiers, indicating the need for development of valid instruments that could be used in assessing these areas. Based on these results, limitations of the study and suggestions for future research are discussed.

• Journal of Communication Design
• /
• v.68
• /
• pp.278-288
• /
• 2019

The purpose of this study is to analyze the effects of risk and convenience on purchase intention in the IOT market, and I want to analyze the moderating effect of emotional consumption value. In this study, two products were selected from three product groups. There are three major methods of research. First, theoretical considerations. Second, survey analysis. Reliability analysis and factor analysis were performed using descriptive statistics using SPSS. Third, we measured changes of EEG according to in - depth interview and indirect experience. As a result of the hypothesis of this study, it was confirmed that convenience of use of IoT product influences purchase intention. Risk was predicted to have a negative effect on purchase intentions, but not significant in this study. This implies that IoT products tend to be neglected in terms of monetary loss such as cost of purchase, cost of use, and disposal cost when purchasing. In-depth interviews and EEG analysis revealed that there is a desire to purchase and try out the IoT product due to the nature of the product, the novelty of new technology, and the vague idea that it will benefit my life. The aesthetic, symbolic, and pleasure factors, which are sub - elements of emotional consumption value, were found to have a great influence. This is consistent with previous research showing that emotional consumption value has a positive effect on purchase intention. In-depth interviews and EEG analyzes also yielded the same results. This study has revealed that emotional consumption value affects the intention to purchase IoT products. It seems that companies producing IoT products need to concentrate on marketing with more emotional consumption value.