• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5044-5051
• /
• 2012

TPM(Total Productive Maintenance) is a methodology to improve corporations' productivity and has been employed widely. At the initial stage of the TPM, we need to set basic plans and goals of the TPM. Also, quantization of performance is required through the TPM activity measurement indices to achieve the plans and the goals. We analyzed measurement factors of TPM activity by observation of previous researches and suggest a measure methodology of economic effect for the TPM performance measurement based on BSC and quantification of qualitative measurement.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.3
• /
• pp.25-32
• /
• 2004

An advanced algorithm for measurement of phase angle between two sinusoidal signals is proposed in this paper. This algorithm uses discrete sample data of two input signals for calculation of phase angle and amplitude. And the key parameters of the measurement algorithm are described by analytical express, so the calculation of phase angle is simplified. In this paper it is proved that harmonic distortion of the input sinusoidal signals does not affect the measurement value of phase angle by using the proposed algorithm when a whole cycle is sampled. And measurement error by the white Gaussian noise is very small compared by other algorithms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.175-183
• /
• 2021

This paper studies measurement of sonic boom created by supersonic flight and its arrival angle estimation techniques. Since sonic boom propagates as an impulsive noise and includes infrasound frequency, we propose measurement instrumentation acquiring sonic boom signature without distortion. And we suggest the methodology for an arrival angle estimation with its performance analysis in accordance with sensor array configurations. The performance of our estimator is verified by comparing theoretical performance bound with statistics of its Monte-Carlo simulation results. Furthermore, we presents the analysis of the sonic boom measurement from real flight tests. This work provides an intuitive concept for sensor array configurations and measurement instrumentation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2008

It is important to grasp the accurate lighting level for appropriate maintenance of the road lighting equipment. It is developed 2 division illuminance measurement systems. This system has a small size and no need to block the way and achieves the speedy measurement and high accuracy data in automatically measurement. As a result, this system can save expense and time to measure roadway lighting.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.293-300
• /
• 2009

기업 인력의 e-Business 적용 능력은 e-Business 환경에서 개인에게 주어진 업무를 효율적으로 수행하고 업무성과를 향상하기 위해 필요하다. 본 연구는 e-Business 인력의 측정도구, 측정체계 및 방법을 제시한다. 개발된 측정도구는 요인분석과 신뢰성 분석을 통하여 그 구조의 타당성을 검증하였고, e-Business 인력을 효과적으로 측정할 수 있는 16 개의 측정항목을 갖는 측정 도구를 제시하였다. 개발된 측정도구의 적용성과 활용성은 실제 e-Business 환경의 기업에서 근무하는e-Business 인력에 적용하여 그 결과를 제시함으로써 확인 하였다. 본 연구는 e-Business 환경의 기업에서 근무하는 인력의 e-Business 능력을 측정하고 개선하는 방법론을 개발하는 데 공헌할 것이다.

• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.227-236
• /
• 2005

We study, in terms of VoIP user assessment of voice quality, the synchronization of measurement system is important. Commonly the synchronization system uses NTP(Network Time Protocol) or GPS(Global Positioning System), these synchronization method has time error of distance, system overhead of data processing, and system specialized clock error. we propose and implement the synchronization method to correct time error between two measurement system in the internet. So the time synchronization of systems can get time error, then user assessment of voice quality become reliable.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.73-78
• /
• 2010

Estimation of tensile properties measurement uncertainty of material was carried out. Sources of uncertainty affecting the measurement of tensile properties were classified and analyzed. The models for uncertainty evaluation of measurands to be determined from tensile test, such as elastic modulus, yield strength and tensile strength, were suggested and derived from the mathematical relations, corresponding to the respective measurands, and the measuring quantities by calculating each sensitivity coefficient of the quantities. Based on these models, the uncertainty of the tensile properties was evaluated from the experimental data of SUS316LN determined according to ISO 6892.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2285-2290
• /
• 2017

Automation systems are evolving in many areas of industry in recent years. At the same time, the necessity of the height inspection of the object by the 3D measurement is gradually increasing. Among the various 3D measurement methods, this paper discusses phase measuring profilometry(PMP). The PMP is a method of obtaining the height of an object using the phase value of the fringe pattern. Since the PMP is an algorithm requiring a large amount of computation, a method for efficiently solving the problem is needed. In this paper, we propose to use CUDA from NVIDIA to solve this problem. We also propose using pinned memory and streams provided by CUDA. This can greatly improve the measurement speed while maintaining accuracy. Finally, we demonstrate the performance of the proposed method through experiments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.51-56
• /
• 2005

Ground resistance measurement is an elementary technique for the evaluation of grounding system. There are main environmental factors to consider for correct measurement, but the problem is that it is practically most cases to measure ground resistance unable to know the factors. This paper presents a methodology toward true value of resistance in the unknown circumstance, utilizing the defined term, 'variation rate' of potential difference curve appearing in the distance to a current probe as in the three point fall-of-potential method which comprises the characteristics of environmental factors. This methodology is a induced result from the previous demostrated studies.

• Water for future
• /
• v.29 no.2
• /
• pp.167-178
• /
• 1996

In designing automatic water quality monitoring networks for a river basin, determination of measurement locations and items is critical to the effectiveness of the total system. In this paper we studied how to decide these two design factors when a monitoring network is designed for the purposse of water quality surveillance and emergency alarm. For measurement locations, candidate sites are chosen based on the intake amount for water supply and the point sources of contamination. Then, detailed locations are decided according to the contaminant flow distance. As for measurement items, characteristics and the accident history of water pollution in the basin must be taken into account. Considering economic aspects, we proposed a two-stage measurement plan: basic components for all locations and selective ones variable for different locations. Proposed methodology is demonstrated through a case study for Nak-dong River Basin.