• Title/Summary/Keyword: 측선수

Search Result 257, Processing Time 0.03 seconds

High Resolution Shallow Seismic Reflection Survey for the Investigation of Ground Disturbance Area (지반교란 영역 규명을 위한 고분해능 천부 탄성파 반사법 탐사)

  • Ko, Kwang-Beom;Lee, Doo-Sung
    • Geophysics and Geophysical Exploration
    • /
    • v.6 no.1
    • /
    • pp.28-34
    • /
    • 2003
  • A problem of ground subsidence has been a focus of our research over the past 3 years. The purpose of this study is to investigate the disturbed stratigraphic structure by mining and to separate the possible ground subsidence area using shallow seismic reflection survey and processing. To overcome the problems such as the distortion and attenuation of seismic signal caused by ground disturbance and to acquire the high frequency data, an array with short spacing (0.3m) for both the shot and receivers, yielding near-offset (<30m) and CMP spacing of 0.15m was implemented. Data were acquired along the survey line with length of about 43m by fixed receiver array. By considering statics caused by the ground disturbance and offset distribution of data, careful processing steps such as muting and residual statics correction were applied for successful shallow reflection imaging. By correlating the ground subsidence data and stack section, possible subsidence zone could be interpreted quantitatively.

A Study on the 2-D distribution of Dynamic Poisson's Ratio using 3-C Geophones (3성분 지오폰을 이용한 동포아송비의 2차원 분포 연구)

  • Hong, Myung-Ho;Hwang, Yoon-Gu;Cho, Cheol-Hee;Lee, Yoon-Jung;Kim, Ki-Young
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2005.05a
    • /
    • pp.223-226
    • /
    • 2005
  • In order to acquire 3 components data which has the good signal to noise ratio with only one shot, 3-C geophones were used, As a result, the vertical component showed the distinct first arrival of P-wave, and the horizontal component was improved the signal to noise ratio of S-wave, while was attenuated P-wave. The 2-D Poisson's ratio section was computed from P- and S-wave cell velocities included velocity tomograms of the P- and S-waves. The Poisson's ratio values were computed in the range of $0.2{\~}0.3$. With one shot, we can obtain 2-D distribution of dynamic Poisson's ratio as well as velocity tomograms of P- and S-waves.

  • PDF

Characteristics of Surface Topography Variation on the Gochang Beach, Southwestern Coast of Korea (한국 서남해안 고창 해빈의 표층 지형 변화 특성)

  • Kang, Sol-Ip;Ryang, Woo-Hun;Chun, Seung-Soo
    • Journal of the Korean earth science society
    • /
    • v.36 no.6
    • /
    • pp.533-542
    • /
    • 2015
  • The Gochang beach is located in the southwestern coast of Korea along the eastern part of the Yellow Sea, comprising the Donghori, Gwangseungri, and Myeongsasipri beaches from north to south. The Gochang beach is characterized by macro-tide, open-coast, linear shoreline, and sand substrates. This study has investigated annual and seasonal characteristics of surface topography variation and sediment accumulation rate in the Gochang beach. During the five seasons of winter (Feb.), spring (May), summer (Aug.), and fall (Nov.) in 2014 and winter (Feb.) in 2015, the topographic elevation of total 315 sites was measured along three survey lines. It consists of 21 sites at 30 m intervals in each transverse line perpendicular to the shoreline, respectively. Annual accumulation rate of the Gochang beach in 2014 was -0.081 m/yr, indicative of erosional condition. Annual accumulation rates of the comprising beaches represent -0.091m/yr of the Donghori, -0.051 m/yr of the Gwangseungri, and -0.10 m/yr of the Myeongsasipri.

Measurement of Tunnel 3-D Displacement using Digital Photogrammetry (디지털 영상을 이용한 터널 3차원 변위 계측)

  • Kim, Kwang-Yeom;Kim, Chang-Yong;Lee, Seung-Do;Seo, Yong-Seok;Lee, Chung-In
    • The Journal of Engineering Geology
    • /
    • v.17 no.4
    • /
    • pp.567-576
    • /
    • 2007
  • In order to assess the on-site applicability of 3D absolute displacement monitoring of tunnel using digital photogrammetry, the displacement of the optical target placed at the measurement section was investigated, as planned in the OO tunnel construction site. The targets on 3 measurement lines only were considered for each point of measurement for the reconstruction of 3D cubic model for the digital vision monitoring. For each 3D model, 3 or more images have to be obtained at each point. On the last 2 measurement lines, 6 targets (crown, left and right walls) were continuously overlapped to construct 3D models so that 6 or more apices can be shared by 2 3D models. In order to compare the measurement methods of 3D absolute displacements in tunnel excavation, i. e, total station and digital image measurement, both the digital image measurement and optical measurement were conducted for 10 times in the same work section. The time and measurement results of both methods were compared.

Discharge estimation using surface velocity and index velocity method (표면유속과 지표유속법을 이용한 유량산정)

  • Lee, Sin Jae;Choi, Hong Yoon;Lee, Dae Young
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.273-273
    • /
    • 2018
  • 하천유량을 산정하는 전통적인 방법은 수위-유량관계(stage-discharge relation)를 이용하는 것이며, 최근에는 하천특성에 따라 연속적으로 유속을 직접 측정하고 지표유속법(index velocity method) 또는 유속분포법(velocity profile method)을 이용하는 방법도 적용되고 있다. 연속으로 유속을 측정하는 방법에는 전자파 또는 영상이미지를 이용하여 표면유속을 측정하는 방법과 수중에 초음파 유속계를 설치하여 수중의 유속을 측정하는 방법이 있으며, 국내에서는 초음파 유속계를 이용하는 방법이 주로 활용되고 있다. 본 연구에서는 전자파표면유속계(MU2720)로 측정된 표면유속과 지표유속법을 이용하여 하천유량 산정방법을 검토하였다. 본 연구는 홍천강의 홍천군(반곡교)와 홍천군(홍천교), 한탄강의 철원군(한탄대교) 수위관측소에서 2016년도에 전자파표면유속계로 측정된 43개의 자료(평균유속 0.61~2.56m/s)를 이용하였다. 전자파표면유속계에 의한 유속측정은 한 지점에 고정하여 측정하지 않고 여러 개의 측선을 분할하여 표면유속을 측정하였으며, 단면 평균유속(Vm)과 가장 상관성이 높은 측선(지점)의 유속을 지표유속으로 하여 지표유속(vi)과 평균유속과의 관계식을 작성하고, 이를 통해 유량을 산정하였다. 여기서 평균유속은 전자파표면유속계로 측정한 유속을 이용하여 산정한 값이다. 그 결과 지표유속과 평균유속관계식의 결정계수($R^2$)는 0.9874~0.9976이었으며, 측정 평균유속과 지표유속관계식으로 산정된 평균유속과의 평균 편차율은 2.26~3.80%로 표면유속과 지표유속법을 이용한 유량산정 방법의 적정성을 확인할 수 있었다. 따라서 현재 국내에서 자동유량측정시스템에 초음파유속계만 상용화되고 있으나 향후에는 하천특성에 따라 전자파표면유속계를 이용하는 방법도 고려해 볼 필요가 있을 것으로 판단된다.

  • PDF

Development of Integrated drone measurement system for Flood discharge measurement (홍수기 유량측정을 위한 통합 드론측정시스템 개발)

  • Tae Hee Lee;Jong Wan Kang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.82-82
    • /
    • 2023
  • 홍수기 하천에서 유량측정은 예산, 인력, 안전 및 측정 시 편의성 등의 이유로 측정에 제한이 많다. 특히, 태풍 등으로 인한 호우사상 발생 시 위와 같은 문제로 홍수량 측정에 어려움이 따른다. 이러한 문제점을 개선하기 위해 Lee et al.(2021)은 드론과 전자파표면유속계의 기능을 융합한 DSVM(Dron and Surface Veloctity Meter using doppler radar) 측정방법을 개발하였다. 전자파표면유속계 측정의 제한 요소인 진동을 감소시키기 위해 댐퍼플레이트를 개발하였고 금강의 지류인 봉황천에 현장 적용을 통해 DSVM 측정방법의 실용성을 확인하였다. 기존 연구에서 DSVM 방법은 드론의 각 측선 이동을 위한 조종과 전자파표면유속계 측정의 제어를 측정자가 수행하였는데 본 연구에서는 통합 드론측정시스템(IDMS, Integrated Drone Measurement System) 개발을 통해 측정자의 조종 의존도를 줄임과 동시에 안전하고 정확한 유량측정을 위해 노력하였다. 기존 댐퍼플레이트의 상하 진동 흡수 기능뿐만 아니라 전자파표면유속계의 흔들림 현상 등 자세 제어 기능을 보완하기 3축 모터를 적용한 방수짐벌을 개발하여 측정 정확도를 향상시켰다. 미션컴퓨터 개발로 측정지점의 측정 임무정보를 DB화하여 각 측선별 헤딩, 고도, 이동 등 자동항법 기능과 기체의 안정화 이후 전자파표면유속계를 자동으로 제어하여 측정을 실시하는 기능을 구현하였다. 또한 통합 GCS(Ground Control System)를 통해 비행 및 측정에 대한 모든 정보를 확인하고 컨트롤 할 수 있게 하였다. 2022년 금산군(제원대교), 무주군(취수장), 경주시(서천교) 지점에서 홍수기 유량측정에 도입하여 중간단면적법, 지표유속법을 적용하여 통합드론측정시스템의 실용성을 검증 완료하였다. 2023년 현장에 18대의 통합 드론측정시스템을 도입하여 홍수기 유량측정에 활용할 계획이다.

  • PDF

Analysis of the mixing effect of the confluence by the difference in water temperature between the main stream and the tributary (본류와 지류의 수온차에 의한 합류부 혼합 양상 분석)

  • Ahn, Seol Ha;Lee, Chang Hyun;Kim, Kyung Dong;Kim, Dong Su;Lyu, Si Wan;Kim, Young Do
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.175-175
    • /
    • 2022
  • 하천 합류부는 서로 다른 지형학적 특성과 수리학적 특성을 가지는 두 개의 하천이 하나로 합쳐지는 구간으로 급격한 흐름의 변화 및 퇴적물의 유입과 수리학적 지형변화가 발생하는 구간이다. 합류부 구간에서는 물질의 종류 또는 온도차로 인해 밀도 차이로 유체의 흐름이 발생하게 되는데 이것을 밀도류라고 한다. 밀도차이에 의해 성층이 생긴 수체혼합거동을 파악하기 위해서는 본류 및 지류의 일정 구간을 포함하는 합류부 구간에 대한 정밀한 계측 및 관찰이 필요하다. 이러한 수체 혼합에 대한 종합적인 분석은 유속장 및 유량정보를 취득하여 파악할 수 있지만, 성층류가 흐르는 하천의 서로 상이한 물리적 특성과 수질특성을 가지는 수체의 혼합양상 및 그에 따른 물질혼합양상을 파악하는데 한계가 있다. 따라서 본 연구에서는 합류부 구간에서의 수온 분포를 통하여 밀도류를 파악하고자 한다. 하천의 광범위한 데이터 중 연직 자료와 수표면 자료를 취득하였고, 이를 통해 합류부의 성층현상을 확인하고자 하였다. ADCP를 보트 측면에 설치하여 저속운행으로 수리량을 측정하는 방식과 YSI를 이용해 측선설치 없이 측선 선정 후 보트를 이용하여 흐름에 직각인 방향으로 이동하며 실시간 농도를 측정하는 방식으로 얻은 연직자료 중 수온, EC 등의 직독식 센서 데이터 값을 사용하여 수온차에 따른 수체혼합 패턴을 분석하여 합류부의 혼합 양상을 분석 하고자 하였다. 본 연구에서는 기존 수질측정의 한계였던 1차원적인 측정결과가 나타내는 분석결과를 2차원적으로 보완이 가능하며, 비교 분석한 결과를 토대로 밀도류에 따른 혼합양상 결과가 지니는 혼합패턴을 분석한다면 향후 하천 하류구간의 취수장 취수 시스템에 많은 도움을 줄 뿐만 아니라 합류부 구간의 혼합패턴에 따라 수층 내 성층구간의 현황조사 및 혼합특성 파악을 통해 관리방안제시에 사용될 것으로 사료된다.

  • PDF

Development of a Nondestructive Seismic Technique for Flexural Rigidity of Concrete Track as Slab Displacement Index (콘크리트 슬래브궤도의 휨강성 평가를 위한 비파괴 탄성파 기법의 개발)

  • Cho, Mi-Ra;Joh, Sung-Ho;Lee, Il-Wha
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.6D
    • /
    • pp.905-913
    • /
    • 2008
  • Recently, concrete tracks are introduced into high-speed railroads as an alternative to ballast tracks. Concrete tracks are superior to ballast tracks in the aspect of durability, maintenance and safety. However, deteriorated stiffness of railroad bed and settlement of soft ground induced by trapped or seepage water lead to problems in safety of train operation. In this research, flexural rigidity of concrete tracks was employed as an index of track displacement and a new seismic technique called FRACTAL (Flexural-Rigidity Assessment of Concrete Tracks by Antisymmetric Lamb Waves) method was proposed to delineate flexural rigidity of concrete tracks in a 2-D image. In this paper, to establish theoretical background, parametric research was performed using numerical simulations of stress-wave tests at concrete tracks. Feasibility of the FRACTAL technique was proved at a real concrete track for Korean high-speed trains. Validity of the FRACTAL technique was also verified by comparing the results of impulse-response tests performed at the same measurement array and the results of DC resistivity survey performed at a shoulder nearby the track.

Development of Autonomous navigation of Drones and Automatic measurement system for Surface velocity doppler radar (드론의 자율운항 및 전자파표면유속계 자동 측정 시스템 개발)

  • Lee, Tae Hee;Kang, Jong Wan;Jeong, Seung Gyo;Kim, Geon Woo;Lee, Ki Sung;Lee, Sin Jae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.90-90
    • /
    • 2022
  • 전자파표면유속계를 이용한 유량측정은 전자파를 발사한 후 수표면에 반사되는 전자파의 도플러효과를 이용하여 표면유속을 측정하는 방법이다. 국제적으로 1980년대부터 홍수유량측정의 어려움을 극복하고자 전자파표면유속계를 개발하여 하천 유량측정 업무에 활용하였다. 미국의 경우U.S. Geological Survey (USGS)에서 교량, 케이블웨이, 제방, 헬리콥터, 비행기 등 전자파표면유속계의 측정 위치에 따라 주파수 범위를 달리하며 유속을 측정하는 연구가 진행되었다. 국내의 경우 Lee et al.(2021)은 드론을 이용한 전자파표면유속계 측정을 위해 드론으로부터 전자파표면유속계로 전달되는 진동을 제거하고 전자파표면유속계의 흔들림 방지를 위한 댐퍼플레이트를 개발하여 드론과 전자파표면유속계를 결합한 DSVM(Dron and Surface Veloctity Meter using doppler radar) 측정방법에 대한 실용성을 확인하였다. 기존 연구에서 DSVM 방법은 드론의 각 측선 이동을 위한 조종 및 전자파표면유속계 측정의제어를 측정자가 수행하였는데 본 연구에서는 자동 측정 시스템 개발을 통해 측정자의 조종 의존도를 줄임과 동시에 안전하고 정확한 유량측정을 위해 노력하였다. 측정지점의 위치정보를 DB화하여 각 측선별 이동하는 자율운항 기능과 전자파표면유속계를 자동으로 제어하여 측정을 실시하는 기능을 개발하였다. 또한 전자파표면유속계 컨트롤 시스템과 GCS(Ground Control System)를 통합하여 한 시스템에서 측정의 모든 상황을 컨트롤 할 수 있게 하였다. 현재까지는 DSVM 방법의 자율운항 기능과 자동 측정 시스템의 테스트를 완료하였고 2022년 홍수기 유량측정에 도입하여 홍수기 유량측정의 실용성을 판단할 계획이다.

  • PDF

Case study on the lake-land combined seismic survey for underground LPG storage construction (LPG 지하저장기지 건설을 위한 수륙혼합 탄성파탐사 사례)

  • Cha Seong-Soo;Park Keun-Pil;Lee Ho-Young;Lee Hee-Il;Kim Ho-Young
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2002.09a
    • /
    • pp.101-125
    • /
    • 2002
  • A lake seismic survey was carried out to investigate possible geohazards for construction of the underground LPG storage at Namyang Lake. The proposed survey site has a land-lake combined geography and furthermore water depth of the lake is shallow. Therefore, various seismic methods such as marine single channel high resolution seismic reflection survey, sonobuoy refraction survey, land refraction survey and land-lake combined refraction survey were applied. Total survey amounts are 34 line-km of high resolution lake seismic survey, 14 lines of sonobuoy refraction survey, 890 m of land refraction survey and 8 lines of land-lake combined refraction survey. During the reflection survey, there were severe water reverberations from the lake bottom obscured subsurface profiling. These strong multiple events appeared in most of the survey area except the northern and southern area near the embankment where seems to be accumulated mainly mud dominated depositions. The sonobuoy refraction profiles also showed the same Phenomena as those of reflection survey. Meanwhile the results of the land-lake combined refraction survey showed relatively better qualities. However, the land refraction survey did not so due to low velocity soil layer and electrical noise. Summarized results from the lake seismic survey are that acoustic basement with relatively flat pattern appeared 30m below water level and showed three types of bedrock such as fresh, moderately weathered and weathered type. According to the results of the combined refraction survey, a velocity distribution pattern of the lake bottom shows three types of seismic velocity zone such as >4.5 km/s, 4.5-4.0km/s and <4.0km/s. The major fault lineament in the area showed NW-SE trend which was different from the Landsat image interpretation. A drilling was confirmed estimated faults by seismic survey.

  • PDF