• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.209-218
• /
• 1996

This study aims to draw a technique for practical using of GPS surveying to decide the positions of cadastrial control points. GPS surveying is carried out at cadastrial triangulation points and supplementary control points. This paper includes characteristics of transformation of WGS84 into Tokyo datum, two dimensional solutions for GPS baseline vector, and combined solutions of both GPS and terrestrial data. As a results of this study, it is verifiable that GPS surveying is very efficient to check the existing control network. 2-D network adjustment technique using GPS baseline vector is applicable to Tokyo datum without coordinate transformation. And it is expected to improve efficiency by using either rapid-static or stop and go kinematic surveying in cadastrial surveying at small areas.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.295-296
• /
• 2009

국내에 도입된 라인센서방식의 디지털항공카메라 ADS40영상을 활용하여 항공삼각측량을 수행하는데 있어 기준점의 수량 및 배치를 달리하여 성과를 분석한 결과는 모든 방법에서 국토지리정보원 항공사진측량작업내규에서 요구하는 정확도를 확보할 수 있었고, 기준점의 배치가 조밀하면 좀 더 양호한 성과를 확보할 수 있음을 확인했다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.73-80
• /
• 2004

The purpose of this study is the GCP/DEM estimations through satellite stereo image interpretation using GPS. We carried out GPS observation fixing first order control points and GPS permanent stations. Comparing static surveying and kinematic surveying, we analysed the surveying methods for GCP and DEM estimations. As the results, considering SPOT image spatial resolution, the DEM can be made through satellite stereo image interpretation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.127-133
• /
• 2014

The purpose of this study is to evaluate the accuracy of Network-RTK(VRS) survey for applying to Ground Control Points(GCPs) survey required for mapping aerial photographs. Network-RTK has been serviced by National Geographic Information Institute since 2007. On the basis of the global coordinates system(ITRF2000), the coordinates of GCPs determined by Static GNSS survey with relative positioning techniques were regarded as accurate values. The coordinates of GCPs were also determined by Network-RTK survey using two kinds of receivers, and then they were converted into the global coordinates system(ITRF2000) by applying suitable geoid model and coordinate transformation. These coordinates of GCPs were compared with those from Static GNSS survey. The root mean squares error (RMSE) of coordinate differences between Network-RTK and Static GNSS was ${\pm}2.0cm$ in plane and ${\pm}7.0cm$ in height. Therefore, Network-RTK survey that enables single GNSS receiver to measure positions in short time is a practical alternative in positioning GCPs to either RTK survey that uses more than two sets of GNSS receivers or Static GNSS survey that requires longer observation time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.37-42
• /
• 2009

The accuracy of RTK GPS is limited by the distance dependent errors from orbit, ionosphere and troposphere, as the distance between the rover and the base station increases in the Real Time Kinematic surveying. To solve this problem, VRS system has installed. This study would estimated the accuracy of cadastral detail surveying, which is used on the VRS RTK instead of Total Station and RTK GPS demand for various equipments and time. As a result of study, the positioning accuracy of the VRS RTK and RTK GPS surveying make no greate difference, as RMSE of VRS RTK surveying is 0.144m and that of RTK GPS surveying is 0.146m and the new method would be more efficient.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.551-555
• /
• 2004

본 연구는 건설교통기술혁신 사업의 일환으로 '국가기준점의 관리 및 위치정보서비스 제공을 위한 전자표지석 개발' 과제에 관한 연구내용 및 결과를 중심으로 하고 있으며, 주 내용은 2차 년도 연구에서 수행한 TOA(Time Of Arrive) 방식을 적용한 전자표지석 개발에 관한 것이다. 본 연구의 궁극적인 목적은 국가기준점을 효율적으로 관리하기 위한 새로운 방안을 제시하는 것으로, 기준점의 현황을 실시간 모니터링하고 기준점의 위치파악을 용이하게 할 수 있는 시스템을 연구하는 것이다. 이를 위해 기준점의 현황을 모니터링 가능하도록 기준점의 움직임을 파악할 수 있는 센서를 부착하였고, 편리한 기준점 위치파악을 위하여 TOA(Time Of Arrive) 방식을 적용한 전자표지석의 설계 및 시제품을 제작하였다. 연구결과를 기준점 관리에 활용하기 위한 시제품을 개발하였다.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2006

Recently, spillways are need to control stable water level for supporting main dams because of floods by unusual change of weather such as Typhoon Rusa. This study has been focused on the amount of leakage through the rock mass distributed fractures and joints under the opened emergency spillway. It is very important to evaluate the amount of leakage as these affect stability of spillway by interaction between effective stress and pore pressure. The commercial program MAFIC has been used for analyzing groundwater flow in fractured rock mass. The results showed that the values of range, average and deviation of leakage were 2.85∼ 3.79×10-1, 3.32×10-1 and 1.70×10-2 m3/day/m2 respectively. Secondary, we have estimated the effect of grouting after the transmissivity(Tf) of joint 1 as main pathway of leakage known from above results was changed from 1.78×10-7 to 1.59×10-9 m2/s. The results showed that the values of range, average and deviation of leakage were 7.80×10-4∼1.53×10-3, 1.18×10-3 and 1.32×10-4 m3/day/m2 respectively. As the result, the amount of leakage after grouting has been decreased by a ratio of 1 to 277.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2010

It is necessary to determine accurate 3-dimensional coordinates of the building corner points that could be control or check points in order to verify the accuracy of 3D digital maps in the near future. The usual process of obtaining the coordinates of the building corner points is to set up the ground control points with a GPS and then to practice terrestrial survey such as distance or angle measurements. However, since an error in the ground control points can be propagated through the terrestrial survey into the final coordinates of the buildings, accurately should be considered as much as possible. The actual effect of the GPS-derived ground control point error on the estimates of the unknowns through the terrestrial survey is mathematically analyzed, and the simulation data is tested numerically. The error of the ground control points is tested in the cases of 1-4 cm for the horizontal components and 2-8 cm for the vertical component. The vertical component error is assigned twice the horizontal ones because of the characteristics of the GPS survey. The distance measurement is assumed for convenience and the precision of the estimated coordinates of the building corner points is almost linearly increased according to the errors of the ground control points. In addition, the final estimates themselves can vary by the simulated random errors depending on the precision of the survey instrument, but the precision of the estimates is almost independent of survey accuracy.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2007.10a
• /
• pp.265-270
• /
• 2007

국가기준점은 측량을 위한 주요 시설물로서 관리가 매우 중요하다. 그러나 국가기준점이 설치되어 있는 환경은 측량을 위한 시야 확보가 필요하기 때문에 삼각점의 경우 산 정상이나 인근 기준점과 시통이 가능한 위치에 설치하며, 수준점의 경우 도로변이나 하천변에 설치한다. 국가기준점은 화강암으로 된 표석 형태로 설치되기 때문에 이렇게 외부환경에 노출될 경우 자연 풍화, 인위적인 훼손, 파손 등이 발생할 수 있다. 이러한 현황 파악을 위하여 주기적인 방문관리가 필요하다. 그러나 전국적으로 약 22,000개 가량 설치되어 관리가 어려운 실정이다. 본 연구에서는 국가기준점 관리의 효율성을 높이고 기준점 정책 수립을 위한 통계자료수집을 위한 국가기준점 모니터링 시스템을 개발하였다.본 시스템은RFID가 부착된 국가기준점을 사용할 경우 RFID를 인식하는 단말기는 실시간으로 CDMA 망을 이용하여 모니터링 시스템에 정보를 전송하고, 웹 시스템 상에서 실시간으로 현재 사용중인 기준점이 표시된다. 사용중인 기준점의 사용용도 및 사용자의 현황도 화면에 표시된다. 이러한 정보는 이력관리가 되며, 사용 및 관리에 관한 이력정보 보고서, 기준점별 사용 빈도 및 사용 목적별 빈도 등이 저장되어 기준점 설치, 관리 대상 기준점 선정 등을 위한 기준점 정책 수립을 위한 통계자료를 생산할 수 있다. 이러한 시스템 개발을 통하여 실시간 기준점 모니터링이 가능하며, 관리대상 기준점 선정, 전산화된 이력관리 구현 등으로 인하여 관리비용을 절감하고, 관리인력을 최소화 하는 효율적인 기준점 관리가 가능하게 될 것이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.293-298
• /
• 2014

Recently, the direct georeferencing has been becoming a common method in the aerial photogrammetry. As this direct georeferencing method using converged sensor of the digital photogrammetry camera and GPS(Global Positioning System)/INS(Inertial navaigation System), more rapid and accurate aerial photogrammetry has improved following advanced performance in photogrammetry. Since the accuracy of EO parameters from the direct georeferencing is determined by GPS/INS accuracy, it is significant to calculate the exact attitude information using values of INS rotations. For following calculations, the misalignment, such as INS rotation and the gap of GPS/INS, has to be decided. Because the number of ground control points are used for tirangulation and boresight calibration, those results should be different according to array and location of ground control points. In the study, those location and array of ground control points were tested to be used boresight calibration. As a result, there is no significant change of misalignment and exterior orienation parameters in the case when ground control points were at all course. On the contrarily, the difference has been shown in the case of no ground control point at course.