• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1035-1042
• /
• 2003

As the desire for a better condition in classroom increases, the distribution rate of warming and cooling conditioners increases. But it is known that according to the way by which the equipments put and are operated the comfortableness felt by persons who are in classroom can make a difference. Therefore, proper equipments in accordance with the size of classroom should be considered as well as operational methods when ceiling warming and cooling conditioners put. This study makes conclusions as follows through a simulation to get improvements in accordance with the size of classroom and to improve the heating performance of ceiling warming and cooling conditioners in classroom.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.41-41
• /
• 2004

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.4 no.4
• /
• pp.1-18
• /
• 2004

Research has been carried out to study thermal environment in a classroom under three kinds of air diffusion temperature and six kinds of air diffusion direction for ceiling type air conditioner. The velocity and temperature distributions of air in the room calculated by 3-dimensional numerical method(PHOENICS), This present study was also conducted to calculate the Air Diffusion Performance Index(ADPI) for cooling conditions and Predicted Percentage of Dissatisfied(PPD) for heating conditions. This analysis shows that the optimum angle of ceiling type air conditioner's diffusion is $15{\sim}30^{\circ}$ for cooling mode and about $15{\sim}45^{\circ}$ for heating mode in these calculating conditions. And also analysis has been carried out to evaluate thermal comfort of vertical and horizontal cross section of classroom.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.27 no.6
• /
• pp.513-522
• /
• 1998

우리나라의 여름 기후는 고온 다습한 특징을 갖고 있다. 고온 다습한 지역에서는 습도가 쾌적성을 결정하는데 중요한 요소가 되기 때문에, 습도가 높으면 온도가 그다지 높지 않더라도 쉽게 무더위를 느낀다. 이러한 계절적 특성을 없애 쾌적한 생활을 영위하기 위하여 생활의 질적 향상과 더불어 공조장치의 수요가 매년 두드러지게 증가하고 있다. 특히, 실내의 경우에는 공조장치 중 대표적인 에어컨(air conditioner)으로 냉방을 행함으로써 고온 다습한 여름철의 거주공간을 개선하고 있다. 그러나 고온 다습한 환경하에서의 과다한 에어컨 사용은 인체의 온열 환경적 측면에서 오히려 불리하다. 왜냐 하면, 에어컨에서는 여름철에 잠열(latent heat)을 고려해야 함에도 불구하고 단지 현열비(sensible heat factor)로 취출온도를 결정하고 있기 때문이다. 그 결과, 실내가 과다하게 냉각되어 재실자에게 불쾌감은 물론, 심지어 냉방병도 초래할 수가 있다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.5
• /
• pp.640-648
• /
• 1998

A numerical study has been conducted to investigate the effect of inflow supply air temperature and velocity on ventilation effectiveness in an underfloor air conditioning space. A low Reynolds number k-$\varepsilon$ model is implemented to calculate steady state turbulent velocity distributions. A step-down injection method is used to calculate local and room mean ages from transient concentrations based on the concept of the age of air. Results show that there is a significant effect of Archimedes number on ventilation effectiveness especially for cooling conditions. Reynolds number shows relatively minor effect on velocity distribution and ventilation effectiveness especially for isothermal and heating conditions. It can be concluded that underfloor air conditioning system provides good ventilation characteristics for cooling conditions because of temperature stratification in the space.

• Science of Emotion and Sensibility
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2000

본 연구에서는 기존의 공조방식 및 본 연구에 제안된 개별환경제어시스템(PEM)으로부터 재실자가 거주하여 사용하고 있는 컴퓨터룸(CR)에 대해 기하학적으로 3차원 시뮬레이션을 수행하여 CR의 열취득과 재실자 온열 쾌적감을 감성공학적 측면에서 분석하였다. 본 연구로부터 바닥으로부터 공기를 유입하여 천정으로 유출하는 바닥취출공조(TAM)방식이 실내 환경 개선에 유리하고 디퓨저만을 통하여 공기가 유입되어 천정과 바닥으로 공가가 유출되는 개별공조(PEM) 방식은 열적 냉각 성능은 좋으나 컴퓨터와 재실자 주변에 강력한 ㅐ순환 유동을 유인하여 실내 환경의 쾌적감 측면에서는 불리하다. 그러나 PEM과 TAM방식의 결합이 감성공학적 온열특성 분포로부터 CR의 재실자 주변온도 분포에 최적임을 알 수 있다.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.484-492
• /
• 2008

Air Discharge pattern and even temperature distribution is critical for a successful lower temperature air distribution system, which would supply lower temperature air than normal HAVC system. Selection of appropriate diffuser is the most critical element in completing lower temperature system.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.67-77
• /
• 2007

The purpose of this study is to provide fundamental heating design data for the large public enclosures as gymnasium. This study executed indoor thermal environment verification of the existing gymnasium by measuring temperature distribution with and without heating the space in winter. Heating loads from human body was not considered. We examined various indoor thermal environment factors of the large enclosed space in this study which include vertical and horizontal temperature distribution, supply and return air flow feature, thermal comfort environment feature, amount of ventilation and etc.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.13-18
• /
• 1999

기존의 공조방식 및 본 연구에서 제안한 개별환경제어시스템(PEM)으로부터 열유체 유동 헤석용 PHOENICS 프로그램을 이용하여 3차원 시뮬레이션을 수행하여 재실자가 거주하고 있는 CR(컴퓨터실)에서의 Heat Gain과 재실자 온열성 특성을 감성공학적 측면에서 분석하였다. 본 연구로부터 바닥으로부터 공기를 유입하여 천정으로 유출하는 바닥취출공조방식이 실내 환경 개선에 유리하고 diffuser만을 통하여 공기가 유입되어 천정과 바닥으로 공기가 유출되는 PEM 방식은 열적 냉각 성능은 좋으나 PC와 재실자 주변에 강력한 재순환 유동이 발생되어 실내 환경의 쾌적성 측면에서는 불리하나 PEM과 TAM방식의 결합이 감성공학적 온열특성 분포로부터 CR실의 재실자 주변 온도 분포에 최적임을 알 수 있다.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.3-8
• /
• 2008

The purpose of this study is to provide fundamental cooling design data for the large public enclosures as gymnasium. This study executed indoor thermal environment verification of the existing gymnasium by measuring temperature distribution with cooling the space in summer. Cooling loads from human body was not considered. We examined various indoor thermal environment factors of the large enclosed space in this study which include vertical and horizontal temperature distribution, supply and return air flow feature, thermal comfort environment feature, amount of ventilation and etc.