• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2002.05b
• /
• pp.281-288
• /
• 2002

Crab shell 충진 칼럼을 이용한 수중 중금속의 연속적 제거에 있어서 다른 흡착제 (CER, GAC, Zeolite)와 비교 실험을 통하여 crab shell의 중금속 제거능을 알아보았다. 수중 $Pb^2+/{2+}$ 의 column을 이용한 연속적제거에 있어서 미세침전부분이 외부로 배출됨으로 칼럼 외부에 여과시스템의 도입함으로써 중금속 제거능을 높일 수 있을 것으로 판단된다. 중금속의 연속적 제거에 있어서 CER의 1,000 BVs까지의 전체 제거량은 0.35mmol/g, GAC는 0.17mmo1/g, zeolite는 0.16 mmol/g으로 나타났고 crab shell에 의한 중금속 제거량은 0.61 mmol/g으로 다른 흡착제보다 높은 제거효율을 보였다. 수중 중금속의 연속적 제거에 있어서 여러 흡착제의 제거 순서는 crab shell > CER > GAC > zeolite 로 나타났다. Crab shell의 경우는 파과점이 2,000 BVs에서 나타나므로 일반적인 폐수처리의 화학적 처리 후 잔존하는 저농도의 중금속을 제거를 위해 crab shell 충진 칼럼이 유용 할 것으로 판단된다. Crab shell의 재사용 가능성을 알아보기 위하여 crab shell을 이용한 중금속 제거공정에서 연속적인 중금속제거와 탈착과정을 통하여 보았을 때 1회에서 $Pb^2+/{2+}$제거된 량은 0.71 mmol/g 제거되었고 2회에서는 0.27 mmol/g, 3회에서는 0.02 mmol/g으로 급격하게 crab shell의 제거능이 떨어지는 것을 관찰 할 수 있다. 이는 crab shell이 재사용이 불가능 할 것으로 판단되나 다른 흡착제보다 월등한 제거효율을 보이므로 수중 중금속의 연속적 제거 흡착제 적합할 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.184-187
• /
• 2006

The heat transfer characteristics of solar tower receivers are experimentally investigated with receiver shapes. Generally the heat transfer characteristics become different according to the shapes and materials of the volumetric air receiver. In order to study these effects, The experimental apparatus adopting laminated mesh and honeycombs as the volumetric air receiver is proposed. The receiver consists of laminated mesh (diameter; 100mm, thickness; 1mm), honeycombs (diameter; 100mm, thickness; 30 mm) inserted out the heat transfer characteristics of the laminated mesh the air temperatures are obtained by installing 3 thermocouples on each layer, dividing ceramic tube into 4 layers. Also, a radiative shield is installed to measure the only air temperature. The data for laminated mesh and honeycomb thickness of 30, 60, 90mm are obtained. The results show that the temperature of layer 3 is higher than those of layer 2 and layer 1.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.824-827
• /
• 2010

본 논문은 전동형 모터의 Rotor의 자동 성형을 위한 자동화된 주조기 개발에 대한 결과이다. 개발된 자동화된 Rotor 전용 주조기는 수평형에 비해 금형의 크기가 약 1/2정도 이므로 금형 체결력이 반감되고, 기계 구조는 매우 작아진다. 그리고 Al용탕이 사출되는 과정에서 Spool -> Runner -> Gate -> Cavity(제품)에 이르기까지의 Runner를 최소화하여 재용융을 위한 에너지의 비용 절감을 할 수가 있다. 금형 구조가 간단하므로 금형비가 저렴하여 다품종 소량생산에 매우 유리하다. 개발제품은 수직형 구조로 알루미늄 용탕의 윗면의 공기가 금형의 유로 상측에 위치하므로 공기(gas)가 먼저 배출되어 사출(주조)후 Rotor 성형부에 남아 있는 기포가 최소화된다. 그러므로 충진도가 높아진다. Rotor 코아(규소강)가 크더라도 수직형은 금형내에 삽입(Inset)하기가 쉽고 또한, 제품의 착탈 부위와 사출부위가 다르기 때문에 작업성, 안전성이 우수하고 생산성이 매우 높다. 수직형은 충진 밀도가 매우 높고 밀도가 균일하기 때문 Rotor의 회전 소음, 진동에 대한 품질이 매우 우수하다. 따라서 고효율, 고품질의 전동모터 Rotor 제품 생산에 매우 효과적인 장비라 할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.349-357
• /
• 2016

In this work, we proposed various structural methods to reduce the crosstalk between elements in a planar array of underwater acoustic transducers and investigated the efficacy of each method through finite element analysis. It is shown that the effects of crosstalk reduction increase as the depth of the kerf among elements and the width of the kerf increase, and the elastic stiffness of the kerf filler decreases. Results of this study are expected to be useful in designing the structure of underwater acoustic planar array transducers to maximize their performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.109-116
• /
• 2012

This paper presents a study on the nonlinear behavior of an innovative bridge girder made from concrete-filled and tied tubular steel arch (CFTA) under static loading. Manufacturing of the CFTA girder may have defects which may highly affect the symmetry and performance of the structure. A simple method is proposed by using stiffness extracted from static test data to detect manufacturing defects of the CFTA girder. A three-dimensional finite element model was used in the numerical analysis in order to verify the method. The proposed method was experimentally validated through static tests of the CFTA girder. The application of the proposed method showed that it is effective in identifying invisible manufacturing defects of the CFTA girder, especially for mass production of a standard type in the factory.

• Mineral and Industry
• /
• v.17 no.1
• /
• pp.1-15
• /
• 2004

장석은 복잡다단한 광물학적 특성에도 불구하고 그 물질적 이해와 용도 측면에서의 단순성 때문에 관련 산업 부문에서 부가가치 향상이 잘 이루어지지 않고 있는 실정이다. 현재 전 세계적으로 10위권 내의 생산 수준을 유지하는 국내산 장석의 광석 유형은 그 관물상과 산출상태에 따라 페그마타이트상 장석, 반화강암질 및 우백질 화강암상의 장석으로 구분 될 수 있다. 현재 국내에서 개발되고 있는 장석들로는 일반적으로 반화강암질 유형의 광석이 가장 흔하다. 이 유형의 광체들은 흔히 알바이트화 작용이나 K-부화를 수반하는 열수변질 작용을 받은 양상을 보이는 것이 특징이다. 광물특성 상으로는 K-장석에 속하는 광체들이 Na-장석 유형들 보다 상대적으로 흔하고 대체적으로 그 부존 규모도 큰 것으로 나타난다. 장석의 부가가치 향상을 위해서는 그 품위를 화학조성에만 의존하지 말고 광물조성 단위로 이해하는 방식이 요구된다. 일반적으로 이 광물자원의 요업적 용도 특성상, 광물특성 평가에서 가장 주요한 기준이 되는 사항은 화학조성, 특히 알칼리 조성, $AI_{2}O_{3}$ 함량 및 철분의 함유도인 것으로 판단된다. 그렇지만 앞으로 그 수요가 확장될 전망이 있는 충진재 용도로 사용될 경우에는 이 같은 화학적 특징보다는 장석광물의 조성과 제반 물성적 특성에 그 품질이 의존될 것으로 여겨진다. 이에 따라 장석 광석의 화학조성과 물성은 기본적으로 장석의 광물상과 조성에 의존된다는 지식기반 하에서, 장석의 품위는 물론 품질 특성 평가에 있어서도 화학조성에만 의존하지 말고 그 광물상과 광물특성도 고려해서 평가하는 지혜가 요구된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.353-357
• /
• 1998

Cracking problem of Epoxy Molding Compound(EMC) is critical for the reliability of the plastic package during temperature cycling and IR-reflow condition. Fracture toughness of EMC, which is defined as the resistance of EMC to the crack propagation, is a useful factor in ht estimation of EMC against package crack. Thus, development of EMC having high fracture toughness at a given loading condition would be important for confirming the integrity of package. In this study, toughness of several EMC was measured by varying the test conditions such as temperature, loading speeds, and weight percent of filler in order to quantify the variation of toughness of EMC under various applicable conditions. It was found from the experiments that toughness of all EMC has following trends, i.e., it rapidly decreases over the glass transition temperature, remains almost same or little decreases below $0^{\circ}C$. It decreases with the growth of cross head speed in EMC and the weight percent of filler as the degree of brittleness of EMC increases with the amount of filler content.

• Korean Journal of Materials Research
• /
• v.19 no.7
• /
• pp.382-385
• /
• 2009

Efforts to reduce noise in industrial application fields, such as automobiles, aircrafts, and plants have been gaining considerable attention while a sound proof wall to protect people from the noise has been intensively investigated by many researchers. In this study, our research group suggested creating a new sound proof wall composed of scrap aluminum chips and perforated plates in a commercial polyester sound proof wall, which was then successfully fabricated. This wall's sound absorption characteristics were measured by an impedance tube method. The sound absorption property was evaluated by measuring the Noise Reduction Coefficient (NRC) to the standard, ASTM C 423-90a. The noise reduction coefficient of the sound proof wall composed of 3.5 vol.% and 7.5 vol.% of scrap aluminum chips relatively increased to 5% and 8% compared to the commercial polyester sound proof wall. The scrap aluminum perforated plate also relatively increased to 13% compared to the commercial polyester sound proof wall.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.461-466
• /
• 2022

Epoxy resins are widely used in various industrial fields. However, they suffer from brittleness, an issue that must be addressed for further applications. To solve this problem, additional fillers are needed to improve the mechanical and thermal properties of the resins; zirconia is one such filler. However, it has been reported that aggregation may occur in the epoxy composites as the amount of zirconia increases, preventing enhancement of the mechanical strength of the epoxy composites. Herein, to reduce the aggregation, zirconia was well dispersed on halloysite nanotubes (HNTs), which have high thermal and mechanical strength, by a conventional wet impregnation method using zirconyl chloride octahydrate as a precursor. The mechanical and thermal strengths of the epoxy composites with The zirconia impregnated HNTs (Zr/HNT) were investigated. Zr/HNT were characterized by Scanning electron microscope (SEM), transmittance electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy. The thermal strength of the epoxy composites was studied by thermomechanical analysis (TMA) and the mechanical strength of the epoxy composites (flexural strength) was studied by using a universal testing machine (UTM). The mechanical and thermal strengths of the epoxy complex with Zr/HNT were improved compared to those of the epoxy complex with HNT, and also increased as the content of Zr/HNT increased.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.565-572
• /
• 2022

The white plume from the cooling tower can be generated by mixing between discharging hot and humid air and cold air outside. This causes various problems such as icing, traffic disturbances, and fire factors in the vicinity, moreover it can also damage the image of a company. Various methods can be used to prevent white plume, one of them is to install a heat exchanger at the outlet of the cooling tower so that the heat exchanger transfers as much heat as possible to lower the temperature. Therefore the air flow path in the cooling tower should be optimized. Installation of the filler can be used to make the air flow better, thus we investigate the effect of filler on the air flow using CFD method. The pressure and velocity profile in the cooling tower could be acquired by the calculations. The filler made the velocity of the air entering the heat exchanger uniform this was because high flow resistance of the filler suppresses the generation of eddy in the cooling tower. But the total air pressure drop increased about 2 times with filler because the pressure drop by the filler accounted for about 60% of the total pressure drop.