• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.49-52
• /
• 2008

The plain and simple shape water front structure were designed and installed for wave protection and wave resistance. But the installation of these plain and simple structure cause deficiency of environmental affinity. Also the resonance phenomena from the reflective wave and shipwave of the harbor incident wave caused high tide and wave, consequently maintaining the tranquility of inside harbor, give difficulty for mooring the ship and loading-unloading, increase the possibility of ship collision at the quray wall and landing place To solve these problems, we develop the environmentally friendly wave dissipation block. And installation efficiency, stability of the blocks through experiment of C.E Block Joint.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.862-869
• /
• 2000

In a switch routing system, buffers are indispensible to prevent signal collision during routing process. For a photonic switching system, optical buffers are also indispensible if the system requires an active routing rather than a simple optical cross-connect(OXC). To cope with WDM technologies in optical comminication systems in these days, photonic switching system also has to deal with WDM signals. Therefore, optical buffers needed in a switching system has to be routed to the same output. For the receiver to recognize these signals separately, parallel WDM signals during rearrangement process. In this paper, we propose a novel all optical WDM output buffer whose structure, hardware, SNR and BER characteristics are improved a lot comparing with those of previously reported ones. From the analysis of the proposed buffer, the new buffer can hold 255 WDM cells keeping BER of 10-9 as long as a contrast ratio(gain on-off ratio) of optical gate(semiconductor optical amplifier) nside the buffer is 30dB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.53-62
• /
• 2003

This paper demonstrates the in-vehicle dilemma zone warning system (DZWS) project developed as a part of the Driver Advisory and Collision Warning System in Automated Vehicle and Highway System (AVHS). The DZWS project, one of the Korea national ITS projects in 2000 develops the in-vehicle warning device to support drivers' decision making on whether to stop or to proceed to clear the intersection prior to the onset of yellow signal for avoiding the high risk of collision at signalized intersections through the dedicated short range communication (DSRC). This paper explores the design of optimal communication systems between roadway and vehicles, the operational and functional concepts of dilemma zone warning system based on appropriate approach speeds, and the system integration for field test at two sites of signalized intersections. Findings from the system integration indicated that the system would be implemented in eliminating the dilemma zone relative to approach speeds and in reducing red light violations and intersection collisions through the in-vehicle warning device at signalized intersection.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1109-1115
• /
• 2010

FMCW(Frequency Modulation Continuous Wave) Radar can detect the distance and the velocity of forward obstacles using linearly modulated FM signal. For better performance, the RF of radar should be operated with wideband frequency linearity on 300 MHz bandwidth at 77 GHz carrier frequency. In this paper, we propose a simple method for improving frequency linearity of FMCW radar implemented with VCO. The proposed method shows that the Voltage-Frequency relation of VCO could be measured by using the modified Tx waveform of FMCW radar. Then the measured nonlinearity could be compensated using LUT(Look-up Table) with easy. It is noted that the proposed can be adopted in existing system without extra circuit.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.455-459
• /
• 2015

This paper proposes a dispatch unit of GP-GPU with SIMT architecture to support the acceleration of general-purpose operation as well as graphics processing. If all the information of an operand used instructions issued from the warp scheduler is decoded, an unnecessary operand load occurs, resulting in register loads. To resolve this problem, this paper proposes a method that can reduce the operand load and the load on the resister by decoding only the information of the operand using a pre-decoding method. The operand information from the dispatch unit is passed to the operand selection unit with preventing register bank collisions. Thus the overall performance are improved. In the simulation test, the total clock cycles required by processing 10,000 arbitrary instructions issued from the wrap scheduler using ModelSim SE 10.0b are measured. It shows that the application of the dispatch unit equipped with the pre-decoding function proposed in this paper can make an improvement of about 12% in processing performance compared to the conventional method.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.52-61
• /
• 2010

In recent, the interests of multi-user systems have been increased. Multi-user systems allow a number of users to access the system simultaneously. Security is one of the key issues to be addressed in a multi-user environment. We propose a solution based on the NTFS file system that provides the personal data security and considers the convenience of users. The system increases the convenience of users by simplifying the complexity of the security setting on NTFS. We also propose a variety of policies that prevent from the conflicts incurring when different users set up the personal folders simultaneously and do not set up the important folders such as the window system folders as personal folders. In addition, our system supports the function of setting up the prohibition folder lists so that no one can not set the folder to their personal folders.

• Journal of KIISE:Databases
• /
• v.27 no.1
• /
• pp.42-52
• /
• 2000

In many real time applications that the system maintains sensitive information to be shared by multiple users with different security levels, security is another important requirement. A secure real time database system must satisfy not only logical data consistency but also timing constrains and security requirements associated with transactions. Even though an optimistic concurrency control method outperforms locking based method in firm real time database systems, where late transactions are immediately discarded, most existing secure real time concurrency control methods are based on locking. In this paper, we propose a new optimistic concurrency control protocol for secure real time database systems, and compare the performance characteristics of our protocol with locking based method while varying workloads. The result shoes that our proposed O.C.C protocol has good performance in case of many data conflict.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.89-89
• /
• 2017

가속기 기술을 이용한 재료에의 표면처리기술은 일정에너지를 가지는 이온이 재료표면에 충돌함으로서, 스퍼터링, 이온주입, 미세구조 변화 등의 현상을 이용하여 재료표면의 특성을 변화시켜 기계적, 화학적, 광학적, 전기적 특성 등을 변화시키는 표면개질기술에 활용되어져 왔다. 이러한 이온빔 표면처리기술은 이온의 종류나 시편의 제한 없이 치밀한 원자혼합물을 형성하고, 계면형성이 없고, 또한 저온공정이 가능하므로, 정밀도가 요구되는 부품의 내마모성과 내부식성 등을 포함한 기본적인 표면특성 뿐만 아니라 전기전도도, 친소수특성, 내광성 등 표면에 관계된 특성을 개선시키는 역할을 하며, 이온빔 믹싱, 이온빔 스퍼터링, 이온빔 전처리 후 코팅 등의 복합공정을 통해 보다 개선된 표면특성을 가지는 박막제조공정에 적용될 수 있다. 본 발표에서는 지난 10년간 가속기기술을 응용한 이온빔 장치기술 개발현황을 발표하고, 이러한 장치를 활용하여 이온빔 표면처리기술 사례인 내광성/내스크래치성 향상 고분자, 정전기방지, 초친수 표면처리, 기체투과도제어, 자외선차단 필름, 고속에칭기술 등의 기술개발 현황을 발표하고자 한다. 한국원자력연구원 양성자가속기연구센터에서는 수백 keV급의 이온빔 표면처리 장치 이외에도 100MeV 선형 양성자가속기를 이용하여 2013년부터 다양한 분야의 양성자빔/이온빔 이용자들에게 이온빔 장치와 20MeV와 100MeV 이용시설에서 양성자빔/이온빔 서비스를 제공하고 있다. 2016년 기준 이용자수는 양성자가속기 392명, 이온빔장치 279명이며, 이용자 수행과제는 양성자가속기, 이온빔장치 각각 130여개 과제가 수행되었다. 이러한 이용자들의 빔이용연구를 통해 20여편의 논문투고, 10여편의 특허출원의 성과를 얻었으며, 나노분야, 생명공학분야 등의 다양한 분야에서의 빔이용기술을 통해 활발한 연구가 이루어질 것으로 예상된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.558-571
• /
• 1992

In this paper, we propose an improved method of state exploration called the extended circular exploration (ECE) for the efficiency of state exploration and the reduction of explosively growing state. The ECE does not need to explore all the reachable global states, and It can be applied to JV($\boxDr$$\geq$ 2) -party protocol with alternative routes, i.e., it is applicable to the protocol In which adaptiverouting mechanism can be performed. The ECE eliminates a restriction of topology of the conventional circular exploration(CE) by exploring only those global states which are reachable, provided that the participant processes of any group of transitions proceed at the same speed, and that they can be formed as a cycle. Thus the state space explored if not exhaustive. The algorithm presented can detect deadlock error and unspecified reception error It requires storage space and /or execution time much less than those of the conventional perturbation(CP) . It might be used for a solution of the N-process collision and the interference mechanism.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.62-62
• /
• 1998

다이아몬드상 카본은 경도, 열전도 둥이 다이아몬드와 비슷하면서도 박막 성장이 쉬워 다른 재료의 표면보호용 코탱막으로 웅용되고 있다. 최근에 다이아몬드상 카본 박막의 이러한 특성은 전계방출 음극 소자가 이온 충돌, 온도 상승에 의해 마모되는 것을 방지 하는데도 용용되고 있다. 이러한 보호막 기능뿐만 다이아몬드상 카본 박막용 편평한 기 판에 성장시켜 평판 전계방출 음극으로 이용하는 것도 시도되고 었다. 본 연구에서는 이 온빔 스퍼트링 방법으로 다이아몬드상 카본 박막을 성장시켰다. 합성하기 전 챔버의 기 본 압력은 3.2 X 10-7 Torr이었다. 기판으로는 타이타니움 평판, n-타엽의 실리콘 평판, I ITO가 코탱된 유리 평판올 사용하였으며, 중착 전에 기판올 400 V, 15 mA의 알곤 이온 으로 1분간 스퍼트링하여 불순물 막을 제거하였다. 박막 합성시에는 챔버 압력이 3.5 x 1 10-4 To$\pi$가 될 때까지 알곤을 채우고 알곤빔 전류는 30 mA에 고정시키고 빔 에너지를 각각 750, 1000, 1250 eV로 바꾸면서 타켓올 스퍼트랭하였다. 질소를 다이아몬드상 카본 박막애 첨가하면 n-타업 불순물 주입 효과가 있게된다. 질소가 첨가된 박막을 만들기 위 해서는 별도의 이온 총올 사용하여 탄소 타켓 스퍼트령과 동시에 기판에 질소 이온을 입 사시켰다. 만들어진 시료로부터 3 X 10-7 To$\pi$ 진공에서 전류-전압 특성올 조사하였다. 양극으로는 면평한 금속판올 음극 위 150 11m 높이에 셜치하였다. 박막의 물성은 전자 현미경, 오제 전자분광 둥으로 조사하였다. 다이아몬드상 카본 박막을 다른 종류의 편명 한 기판에 합성 조건올 바꾸면서 성장시켜 박악의 특성파 기판이 전계방출에 미치는 영 향을 조사하였다. 합성된 다이아몬드상 카본필름의 전자방출 특성은 기판의 종류와 필름 의 구조 및 필름의 두께에 따라 크게 변화하였다. 이러한 전자방출 거동으로부터 전계 방출 메커니즘을 제시하고자 하였다. 또한, 다이아몬드상 카본 박막으로부터의 전계방출 은 전기장올 인가하는 방법에도 영향을 받는다. 따라서, 본 연구에서는 전기장올 순환 인 가하면서 전계방출 전후의 박막 특성 변화를 조사하여 전계방출 메커니즘올 연구하였다.