• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.137-143
• /
• 2009

It is necessary to develop driving assistant information in order to prevent a rear-end collision with a crashed car which is at the blind curve on highway. Laboratory experiments were performed using a driving simulator to keep the traffic environment constant. This research was evaluated the effect of driver behavior according to providing collision avoidance information which was consisted of advisory, caution, and warning information by the dangerous degree of traffic situation. Driver behavior was evaluated to analyze the collision avoidance with a crashed car, and glance behavior was examined to measure the eye movements to the display on which provided the collision avoidance information. After experiment, the significance was evaluated on provided collision avoidance information. As the result of this research, the number of collision accident is reduced when the phased information was provided. In addition, it is clear that auditory information is more important than visual information in the case of providing the second information.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.66-67
• /
• 2011

항로를 횡단하여 건설되는 교량이 증가하고 해상교통의 증가에 비례하여 항로의 혼잡도가 증가하는 만큼 선박과 교량의 충돌우려가 커지고 있다. 선박과 교량의 충돌은 단순 접촉사고가 아닌 재난급 사고의 개연성이 크다. 직접 손괴를 일으키는 큰 충돌이 아니더라도 선박과 교각의 충격진동에 의하여 교량상판이 균형을 잃고 연쇄 붕괴하는 일이 종종 발생하여 많은 인명의 손실이 발생하고 있기 때문이다. 적정 교각 폭, 교각의 시인성 증진을 위한 표지와 등화의 설치 및 점등방법 등의 환경 여건 개선, 충돌방지공의 효과 검토, 교량 통과전 사전 점검사항, 교량 부근에서 선박의 조종성 유지방안, 예선의 효과 연구, 관제기법과 안전규정, 불가피한 충돌이나 접촉의 경우 손실 감소대책과 충돌방지공의 효과 등 다각적인 연구가 필요하다. 면피용 탁상이론을 배제하고 현장실무의 경험을 바탕으로 실효적인 방안을 제시하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.413-420
• /
• 2006

In this thesis, a RFID baseband system is implemented based on the international standard ISO/IEC 18000-6 Type-B using FPCA, and also anti-collision algorithm is implemented to improve the system performance. We compares the performance of the proposed anti-collision algorithm with that binary tree algorithm and bit-by-bit algorithm, and also validated analytic results using OPNET simulation. The proposed algorithm for Type-B transmission protocol and collision prohibition was designed using ISE7.1i which is a FPGA design-tool of Xilinx and implemented with Spartan2 chip which is a FPGA device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2643-2648
• /
• 2012

In the RFID Sytem, When leaders recognize the tag, a anti-collision scheme is an important factor in the performance of the system. Probabilistic-based anti-collision scheme using the slot status is a technique to estimate the number of tags. the schemes to quickly and accurately estimate the number of tags has been a lot of research. However, A initial number tag are not considering in the number of tags unknown environment. In the paper, estimation scheme for the initial number of tag is proposed to solve the problems. we analyze the performance by the initial number of tag and the proposed scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.33-39
• /
• 2010

In this paper, we propose an improved anti-collision algorithm. We have designed an anti-collision unit using this algorithm for the 18000-6 Type C Class 1 Generation 2 standard (Gen2). The Gen2 standard uses a Q-algorithm for incremental method on the Dynamic Slot-Aloha algorithm. It has basically enhanced performance over the Slot-Aloha algorithm. Unfortunately, there are several non-clarified parts: initial value. If an incorrect value is selected, it causes degradation in performance. To increase throughput and system efficiency, and to decrease tag identification time, we propose an improved anti-collision algorithm. prorosed Q algorithm has an increment of 5% of system efficiency and a decrement of 9% of tag identification time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.33-41
• /
• 2008

As RFID technology is developing and increasingly being used in many applications, the implementation is changing from single reader to multiple readers even dense readers. Since the number of readers is increasing, there are more collisions between readers and much interference between readers and tags. Therefore, to avoid interference or collision, many algorithms have being proposed, such as Gen2 dense mode, LBT(listen before talk), TDMA based method. In this paper, we propose a null frame algorithm, which calculates the collision probability in frame slotted aloha scheme and use this information to avoid the possible collisions. Comparing with conventional scheme, our proposed algorithm has some advantages in terms of reader collision number and required frame numbers.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.20-27
• /
• 2007

In this paper, Air-interface protocols of ISO 18000-6 Type A and B applied to RFID system in UHF band are analyzed, and those algorithms are realized. Also, the improved anticollision algorithms for the Type A and B of ISO 18000-6 protocol are proposed and the performances are compared. As the results, reduction ratio of total tag recognition time of the improved ISO 18000-6 Type A algorithm is 35.2 % for 100 tags and 24.3% for 1000 tags with respect to standard algorithm, respectively. And the reduction ratio of the improved ISO 18000-6 Type B algorithm is 6.0% for 100 tags and 6.6% for 1000 tags. Therefore, the improved anticollision algorithm proposed in this paper is the advanced method improving the performance of tag recognition in the RFID system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.202-207
• /
• 2013

RFID technology is applied to port logistics applications since it monitors objects wirelessly without line of sight and constructs ubiquitous system with low cost. Changes of stock status in the warehouse environment make the technology more important for managing such frequent storing and un-storing. Although the RFID has beneficial characteristics of low cost and low complexity, simultaneous responses of RFID tags cause tag identification collision due to absence of elaborate medium access control scheme. Several algorithms have been proposed to overcome the tag collision problem. However, it is difficult to adopt the methods to the logistics systems that has varying loads since there was no consideration on RFID tag's mobility. Therefore, we propose an efficient RFID tag anti-collision protocol, and simulation results demonstrate performance improvement by using the proposed scheme.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.74-80
• /
• 2007

Advances in electronic and computer technologies have paved the way for the proliferation of WSN(wireless sensor networks). Accordingly, necessity of anti-collusion and authentication technology is increasing on the sensor network system. Some of the algorithm developed for the anti-collision sensor network can be easily adopted to wireless sensor network platforms and in the same time they can meet the requirements for sensor networks like: simple parallel distributed computation, distributed storage, data robustness and auto-classification of sensor readings. To achieve security in wireless sensor networks, it is important to be able to establish safely channel among sensor nodes. In this paper, we proposed the USN(Ubiquitous Sensor Network) channel establishment algorithm for sensor's authentication and anti-collision. Two different data aggregation architectures will be presented, with algorithms which use wavelet filter to establish channels among sensor nodes and BIBD (Balanced Incomplete Block Design) which use anti-collision methods of the sensors. As a result, the proposed algorithm based on BIBD and wavelet filter was made for 98% collision detection rate on the ideal environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.807-812
• /
• 2015

In RFID system, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred as anti-collision algorithm. In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. The PS algorithm divides the tags within the identification range of reader into smaller groups by increasing the transmission power incrementally and identifies them. In this paper, we propose a STAC/PS algorithm that the PS algorithm is applied in the STAC protocol. Through simulations, it is demonstrated that the collision rate for the proposed algorithm is about 50% lower than STAC protocol. Therefore, the STAC/PS algorithm can achieve faster tag identification speed compared with STAC protocol due to the low collision rate.