• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.25-25
• /
• 1998

진동시험기를 사용한 충격시험은 자유 낙하식 충격시험기를 이용하는 것 보다 여러 가지 장점이 있으며, 충격반응 스펙트럼 시험의 요구가 점점 증가하고 있다. 진동시험기를 이용하여 충격반응 스펙트럼 시험을 실시하는데 진동시험기에서 허용하는 최대 힘, 속도, 변위에 의하여 제약을 받게 된다. 충격반응 스펙트럼을 만족하는 충격파형은 무수히 많으나 최대 가속도, 속도, 변위 등이 작으면 작을수록 그 충격파형의 품질이 우수하다고 말할 수 있다. 충격 지속시간이 짧고 충격가속도의 최대치가 큰 충격파형을 인가할 수 없지만, 충격 지속시간이 보다 길고 충격가속도의 최대치가 작은 파형이 동일한 충격반응 스펙트럼 규격을 만족할 수 있다. 진동시험기를 사용하여 충격반응 스펙트럼 시험을 수행하기 위한 충격파형이 웨이브레트를 이용하여 시험규격의 충격반응 스펙트럼을 만족하도록 합성된다. 웨이브레트의 매개변수는 주파수, 반파의 개수, 지연시간, 극성이다. 각 웨이브레트의 진폭은 시험규격의 충격반응 스펙트럼을 만족하도록·반복적으로 조절된다. 이렇게 합성된 충격파형은 진동시험기를 사용한 충격반응 스펙트럼 시험의 참조 가속도 파형으로 간주된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.117-122
• /
• 2001

The shock test of shipboard equipments is performed for the evaluation of the shock-resistant. capability by analyzing the maximum acceleration, the effective time duration and the shock response spectrum, etc. But some measured signals have impulsive noise and gaussian white noise because of the ambient noise, the acquisition equipment error and the transient movement of cables during the shock test. The improved transient signal analysis method which removes the noise of measured signal using the threshold policy of the median filter and the orthogonal wavelet coefficients is proposed. It was verified that the signal-to-noise ratio was improved about 30dB by the numerical simulation. And the shock response spectrum was extracted using the denoised shock response signal which was applied by this proposed method.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.421-425
• /
• 2003

In this study the occlusion of dural-sac. the outer membrane of spinal cord in the lumbar region. was quantitatively analyzed using one motion segment finite element model. Occlusion was quantified by calculating cross sectional area change of dural-sac for different compressive impact duration (loading rate) due to bony fragment at the posterior wall of the cortical shell in vertebral body. Dural-sac was occluded most highly in the range of 8∼12 msec impact duration by the bony fragment intruding into the spinal canal. $\Delta$t = 400 msec case 4 % cross sectional area change was calculated. which is the same as the cross sectional area change under 6 kN of static compressive loading.

• Explosives and Blasting
• /
• v.37 no.4
• /
• pp.10-16
• /
• 2019

Information on overpressure, positive phase duration, and impulse are required to assess the effects of shock waves or pressure waves on the structure. In this study, the overpressure and positive phase duration were determined by applying the Multi-Energy Method, which is found to be effective in analyzing the explosion of vapor clouds. Based on the total heat of combustion estimated in the cyclohexane vapor cloud explosion in the Nypro Ltd(UK), overpressure and positive phase duration at the distance of 40, 80, 120, 160, 200, 240, 280, 320, 360(m) from the source of explosion were evaluated. Overpressure was shown to decrease exponentially and positive phase duration increased almost linearly with distance. A probit function was used to assess the probability of damages for the structures at each distance using the overpressure and impact obtained at the above mentioned distances. The Analyses of probability of damages have shown that there is a high probability of collapse at distances within 120m, major damage to structures within 240m, and minor damage and breakage of window panes of structures occur over the entire distances.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.88-98
• /
• 1998

A waveform for shock response spectrum test on a shaker is synthesized using wavelets such that a specified shock response spectrum of a test profile is achieved. The parameters of a wavelet are center frequency, amplitude, number of half cycles, delay and polarity. The amplitude of each wavelet component is iteratively adjusted so a specified shock response spectrum is matched. The waveform so synthesized is regarded as a reference acceleration waveform for a shaker shock response spectrum test. The author proposes the use of a long duration and low peak waveform. The usefulness of this approach is illustrated with some examples.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.183-193
• /
• 2019

This study developed a shockwave detection and prediction of their extinction point method based on continuous wavelet transform using trajectory data from probe vehicles equipped with automotive sensors.. To analyze the effectiveness of the proposed method, this paper proposed two measures which are a distance error between the extinction points of the predictor and an time-location error of the extinction points. The proposed concept was proved using the micro simulation based experiment with three exogenous variables of traffic volume, lane-close duration, market penetration of probe vehicles. The analysis results show that the proposed method is capable of detecting the traffic shockwaves as well as predicting their extinction point, and also that the accuracy of the proposed method is highly dependent on the rate of the probe vehicles.

• Tunnel and Underground Space
• /
• v.9 no.1
• /
• pp.36-47
• /
• 1999

For cautious controlled blasting, it is necessary to understand characteristics of the blasting vibration. In this study, a series of tests were carried out to investigate the several characteristics of blasting vibration waveform by vibration time history analysis. Separation between impulse vibration and free vibration from blasting vibration, duration time, effects of overlap of free vibration upon the level of vibration and changes of waveform according to increase of charge weight per delay etc. were studied with waveform analysis.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.80-87
• /
• 2017

The performance of a pyrotechnic device that consists of donor/acceptor pair separated by a bulkhead relies on shock attenuation characteristics of the gap material and shock sensitivity of the donor and acceptor explosives. In this research, a micro Kapton flyer was accelerated by an exploding foil initiator (EFI) to figure out shock sensitivity of hexanitrostilbene (HNS) to impact. The averaged shock pressure and duration imparted to the explosive by flyer impact are measured by using a velocity interferometer for any reflector (VISAR) and impedance matching technique. Consequently, this research shows the possibility to determine the critical flyer velocity for initiating the miniaturized pyrotechnic unit by determining the relations between the impact velocity, the amplitude and width of impact loading.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.441-446
• /
• 2004

Mechanical systems with rubber parts have been used widely in industry fields. The evaluation of the physical characteristics of rubber is important in rubber application. Rubber material is useful to machine component for excellent shock absorbing characteristics. The impact characteristics of rubber were examined by experimental and finite element method. The impact test was conducted with a free-drop type impact tester. The ABAQUS/Explicit was used for finite element analysis. The effects of thickness and diameter of the cylindrical rubber structures were investigated. The impact absorbing ratio of the rubber material was studied order to compare the peak reaction force of the specimen which only contained aluminum against the specimen with the inserted rubber part.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.560-565
• /
• 2016

최근 대형 컨테이너선의 개발이 지속적으로 이루어짐에 따라 슬래밍에 의한 선수 및 선미의 구조안정성 문제가 대두되고 있지만 설계 단계에서 슬래밍에 대해 고려하기에는 현상의 복잡성으로 인해 어려움이 많았다. 이를 위해 KRISO에서 시행된 WILS JIP의 선수 단면 형상 및 선미 단면인 쐐기 형상으로 격자를 생성하여 EDISON CFD 다상유동 해석자를 통해 수치해석을 시도하였다. 기존 방식과 달리 계산 시간 절감을 위하여 격자 변형 기법을 적용하지 않고 모형 시험결과를 기반으로 한 유입류 조건을 설정하여 입수 충격 문제를 해석해보았다. 그 결과, 선미 형상의 경우 선행연구와 유사하게 실험 결과에 근접한 유체 충격력을 정량적으로 얻어낼 수 있었다. 선수 형상의 경우에서는 구상 선수로 인해 파생되는 센서 위치별 충격력의 변화를 확인할 수 있었으며, 실제 유동에 가까운 유동 형상과 슬래밍에 의한 충격력을 개략적으로 구할 수 있었다.