• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.1-7
• /
• 2002

QFT is a very practical design technique that emphasizes the use of feedback for achieving the desired system performances in despite of plant uncertainties and disturbances. The loop shaping procedure of QFT is employed to design the robust controller, until the desired bounds are satisfied. This paper presents an optimization algorithm for designing PID controller using the loop shaping of QFT. The proposed method identifies the parameter vector of PID controller from a linear system that develops from rearranging the two dimensional system matrices and output vectors obtained from the QFT bounds. The feasibilities of the suggested algorithm are illustrated with a turbine speed control problem.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.38-46
• /
• 1998

A theoretical and an empirical application of the speed control of a single-shaft turbo-jet engine was done using an observer for Linear Quadratic Gausian(LQG) that is one of the robust control fields. Based on a general controller design with state feedback, a controller with output feedback was designed to find out a sufficient condition in finding an Asymptotic Stability After defining of the total system through the modeling of a real turbo-jet engine, a Tracking Control was carried out. Furthermore, a saturation of the control input was theoretically considered in the output feedback controller to simulate more similar real condition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.809-823
• /
• 1991

본 연구에서는 Wiener 필터링 이론에 의하여 소음원의 입력신호에 대한 최적 한 예측을 할 수 있는 최적예측기(optimal predictor)로써 부가적인 음을 발생시키고 입력신호 및 출력신호 간의 차인 오차를 최소화시키도록 하는 적응신호처리방법에 대 해 설명하고 이러한 적응 신호처리 방법을 이용한 능동 소음 제어 방법을 제시하였다. 이와 아울러 제어계의 환경 변화에 따른 파라메타의 변화에 적응적으로 응답이 가능해 야 하는 적응 소음 제어계에서, 음향궤환과 함께 필히 고려해야하는 부가적인 전달함 수-모델과 스피커를 포함하는 보조경로 및 오차미이크로폰을 포함하는 오차경로의 전 달함수의 영향을 고려한 능동소음제어에 대해 연구하였다.

• Nuclear Engineering and Technology
• /
• v.3 no.2
• /
• pp.59-64
• /
• 1971

This paper presents an approach to control that if a result of modern control theory, and is based on tile control philosophy of feeding back all tile state variable through constant gain frequency independent elements. The values of these elements or feedback coefficients are determined by equating like coefficients of the desired system transfer function to the transfer function of the system containing the unspecified coefficient s. This application of modern control law is a simple design method depending on feedingback all the system variables for reactor control and it is particuraly amenable to the control of Pressurized Water Reactor.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.79-84
• /
• 1989

This paper proposed the new control law which is defined by instantaneous output and time delayed output. To analyze the system with time delayed output, the way which transforms output time delayed systEms into instantaneous output systems is presented. The output responses were more improved by the new control law thEn that of the instantaneous output control law. The algorithem for simulation and a numerical exemple are presented.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.965-967
• /
• 2001

전원 측 전압강하/상승 (Voltage sag/swell)을 보상하기 위한 동적전압보상기(Dynamic Voltage Restorer)등의 직렬 보상기에서 스위칭으로 인한 인버터 출력전압의 맥동(ripple)을 제거하기 위해 LC 필터가 사용된다. 본 논문에서는 LC 필터에서 커패시터의 전압을 상태 궤환을 이용하여 제어하는 알고리즘을 제시한다. LC 필터의 이산시간 상태 방정식을 구한 후, 궤환 이득값을 구하는 과정이 z-평면에서 이루어진다. 그리고, 제어기의 계산지연을 고려하여, 상태 관측기를 설계한다. 제안된 제어기는 기존 직렬보상기와 달리 전류 센서를 필요로 하지 않기 때문에 경제적인 이점을 가지게 된다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1873-1874
• /
• 2006

증기터빈 발전소에서 터빈제어밸브는 운전중 적절히 개도를 조절하여 보일러에서 공급되는 유량을 조절하여 터빈속도 및 발전기의 전기적 출력을 제어할 수 있도록 해준다. 이러한 터빈제어밸브는 4개로 구성되어 있으며, 운전중 최적의 발전효율을 얻기 위해 저부하에서는 4개의 제어밸브가 동일하게 조절되다가 밸브 전환운전을 완료한 후 4개의 밸브가 주어진 특성에 따라 각기 조절되어야 할 필요성이 있다. 대상 발전소에서 시행하고 있는 운전절차중 하나인 밸브전환 운전은 발전기 출력의 변화가 수반되며 이를 최소화하기 위해 고압터빈측의 1단 압력을 궤환하여 보상하는 알고리듬을 사용하고 있다. 사용중에 발전기 출력변화가 발생되어 이를 개선하기 위해 적용되는 알고리듬을 보완하여 실제 발전소 현장에 적용한 결과를 소개하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.2
• /
• pp.131-138
• /
• 2007

In this paper, a novel nonlinear control method of the CVCF(constant voltage and constant frequency) output voltage for the three-phase PWM inverter with LC output filters is proposed. A nonlinear modeling including the output LC filters is linearized by feedback linearization theory, the controllers of which can be designed based on a linear control theory. It is applied to the DC/AC power conversion of the PWM inverter for stand-alone wind power generation system. It has been verified by the experimental results that the proposed control scheme gives high dynamic responses at load variation as well as a zero steady-state error.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.3
• /
• pp.316-323
• /
• 2004

This paper deals with an $H_{\infty}$ output feedback controller design for singularly perturbed T-S fuzzy systems. It is shown that the $H_{\infty}$ norm of the singularly perturbed T-S fuzzy system is less than ${\gamma}$ for a sufficiently small ${\varepsilon}$>0 if the $H_{\infty}$ norms of both the slow and fast subsystem are less than ${\gamma}$. Using this fact, we develop a linear matrix inequality based design method which is independent of the singular perturbation parameter ${\varepsilon}$. A numerical example is provided to demonstrate the efficacy of the proposed design method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.185-190
• /
• 2009

In this paper, an observer-based intelligent controller for the nonlinear networked control systems with packet loss is proposed for wireless sensor network. For the intelligent control of the nonlinear system, it uses the fuzzy system with Takagi-Sugeno (T-S) fuzzy model. The observer is designed for the fuzzy networked control system, and the output feedback controller is proposed for the stability of estimates and errors. The stability condition of the closed-loop system with the proposed controller is represented to the linear matrix inequality (LMI) form, and the observer and control gain are obtained by LMI. An example is given to show the verification discussed throughout the paper.