• Electrical & Electronic Materials
• /
• v.6 no.3
• /
• pp.255-260
• /
• 1993

본 논문은 과도고전압 측정시스템의 단위계단응답으로부터 구한 보정계수를 사용하여 수치계산에 의해 출력값을 보정하는 방법에 대하여 기술하였다. 또한 실규모 용량성분압기의 분압비와 상승시간을 갖는 모의등가회로를 구성하여 측정한 바, 본 연구에서 제안된 보정방법은 급준파 및 차단파 등의 어떠한 입력에도 유용하게 사용할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.262-264
• /
• 2017

본 논문에서는 전류센서 스케일 오차 발생 시 오차 보정 방식에 대해 제시한다. 전류센서 스케일 오차는 회전자 기준 동기 좌표계에서 맥동하는 전류 및 직류 전류 오차를 야기하며, 이로 인해 전류 제어 성능 및 전동기 제어 성능이 떨어진다. 본 논문에서는 전류 제어기 출력에서 나타나는 직류 전압 오차를 수식적으로 분석하고 이를 통해 스케일 계수를 추정하여 스케일 오차로 발생하는 2고조파 전류 및 직류 전류 오차를 보상하는 방식에 대해 제시한다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.141-142
• /
• 2018

본 논문에서는 부하 분담, 신뢰성 및 효율 향상, 시스템 용량을 증가시키는 PCS 모듈 병렬 운전 방법을 제안한다. 병렬 운전을 할 때 모듈별 출력 전압, 전류 값들이 이상적으로 동일하지 않기 때문에 시스템 손실을 초래하는 순환전류가 필연적으로 발생하게 된다. 따라서 순환전류를 저감시키기 위해 모듈별 전력제어와 가상의 계수인 droop index를 이용하여 Load sharing이 잘 되는 제어 알고리즘을 이용하여 병렬 운전 방법의 타당성을 검증한다.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.25-41
• /
• 2011

AVO analysis was conducted on hydrocarbon-bearing structures by applying the crossplot and offset-coordinate amplitude polynomial techniques. To evaluate the applicability of the AVO analysis, it was conducted on synthetic data that were generated with an anticline model, and field data from the hydrocarbon-bearing Colony Sand bed in Canada. Analysis of synthetic data from the anticline model demonstrates that the crossplot method yields zero-offset reflection amplitude and amplitude variation with negative values for the upper interface of the hydrocarbon-bearing layer. The crossplot values are clustered in the third quadrant. The results of AVO analysis based on the coefficients of the amplitude polynomial are similar to those from the crossplots. These well correlated results of AVO analysis on field and synthetic data suggest that both methods successfully investigate the characteristics of the reflections from the upper interface of a hydrocarbon-bearing layer. Analysis based on the incident-angle equation facilitates the application of various interpretation methods. However, it requires the conversion of seismic data to an incident angle gather. By contrast, analysis using coefficients of the amplitude polynomial is cost-effective because it allows examining amplitude variation with offset without involving the conversion process. However, it warrants further investigation into versatile application. The two different techniques can be complement each other effectively as AVO-analysis tools for the detection of hydrocarbon reservoirs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.358-365
• /
• 2008

A differential-gain-controlled LNA is designed and implemented in 0.18 um CMOS technology for $3.1{\sim}4.8GHz$ UWB system. In high gain mode, measurements show a differential power gain of $14.1{\sim}15.8dB,\;13.3{\sim}15dB$, respectably, an input return loss higher then 10dB, an input IP3 of -19.3 dBm, a noise figure of $4.85{\sim}5.09dB$, while consuming only 19.8 mW of power from a 1.8V DC supply. In low gain mode, measurements show a differential power gain of $-6.1{\sim}-4.2dB,\;-7.6{\sim}-5.6dB$, respectably, an input return loss higher then 10dB, an input IP3 of -1.45 dBm, a noise figure of $8.8{\sim}10.3dB$, while consuming only 5.4mW of power from a 1.8V DC supply.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.6
• /
• pp.407-414
• /
• 2023

In this study, an automated jack-up system, applicable to various fields, was employed for 3D concrete printing and developed as a simultaneous liftable 3D concrete printing system. This developed printing system enables safe and precise jack-up by monitoring the measured jack-up distance using Pearson correlation coefficient analysis and a hydraulic system with interquartile range analysis in real-time during 3D concrete printing operations. It is possible to secure the quality of 3D concrete printing structures, which is essential for expanding the application of 3D concrete printing to construct larger structures. Specimens were printed using both conventional 3D concrete printing and simultaneous liftable 3D concrete printing to evaluate the system performance. The printed specimens were investigated using a 3D scanner. The layer-wise diameter and angle of intersection of the scanned specimens were measured, and an analysis was performed to verify the advantages of the simultaneous liftable 3D concrete printing.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.3-8
• /
• 2013

In CDMA-based systems, recently, researches on chip-level equalization have been studied in order to improve receiving performance when supporting high-rate data services. In this paper, we consider a chip-level LMMSE (linear minimum mean-squared error) receiver for D-TxAA (dual stream transmit antenna array) based single stream HSDPA MIMO systems using precoding weights. First, we will derive precoding weights for maximizing the total instantaneous received power. We will also analyze the effects of both transmit delay of precoding weights and mobile velocity on chip-level LMMSE receivers, which is verified through computer simulations in various mobile channel environments.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.161-164
• /
• 1999

본 논문에서는 표적 추적 시스템에서 센서 어레이에 입사되는 표적신호에 대한 센서 출력 신호간의 지연시간 추정(TDE:Time Delay Estimation)을 위해 백색상호 상관법(CSP:Cross-Power Spectrum Phase Analysis)을 이용한다. 그러나 음파의 다중경로 전달특성 및 배경잡음의 영향으로 인해 CSP계수는 많은 클러터(Clutter)를 포함하게 되고 결국 방위 추정 오차의 요인이 된다. 따라서 센서 어레이 중심좌표를 기준으로 대칭 배열된 센서쌍(Pair)에 대한 CSP계수를 동기가산 하여 실제 표적 방향 이외의 방향정보를 제거하는 방법을 제안한다. 시간에 따라 각도를 변침하는 표적에 대한 표적기동분석 (BOTMA:Bearings Only Target Motion Analysis)을 위해 매 관측시간마다 동기가산을 행한 CSP결과를 누적하여 방위각 궤적을 형성하였을 때 시간 Window에 따라 약간의 차이는 있지만 약 10dB의 궤적 추적 성능을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.186-189
• /
• 2000

In this paper, we have designed a bandpass filter to apply the downconverter of the K-band Mu-hung-hwa satellite. To pass only the 25-30% of the bandwidth at the center frequency of 19.6GHz, we have designed a six-order interdigital bandpass filter using microstrip lines. Simulation result of optimization show that insertion loss is -0.275dB and reflection coefficient is -20.95dB at the passband frequency. measurement is determined center frequency, 19.150Hz, insertion loss, -4.1dB, input reflection coefficient. -l5dB and output reflection coefficient -l6dB.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.61-65
• /
• 1999

This paper derives a sufficient condition on the stability of recursive third-order Volterra filters based on their filter coefficients. A Volterra filter is very effective in modeling nonlinear systems with memory. However, it is well-known that the nonrecursive Volterra filter requires a large number of filter coefficients to describe a nonlinear system. For this reason, recursive Volterra filters are usually considered because the recursive implementation requires a smaller number of coefficients compared to the nonrecursive one. Unfortunately, the main problem of the recursive Volterra filters is their inherent instablility. In this paper. we present a simple condition for the output of a recursive discrete-time third-order Volterra filter to be bounded whenever the input signal to the recursive Volterra filter is bounded by a finite constant.