• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5912-5918
• /
• 2014

Owing to highly developed industries and the use of fossil fuels, environmental problems becoming becoming pressing issues globally. Therefore, a study of automobile exhaust is urgently needed. Generally, air is sucked into the engine through the intake manifold. The aims of this study were to reduce the exhaust from used cars and increase the output by removing carbon deposits, which are considered a reason for the increasing exhaust and reduction of output, and the reduction of exhaust, variation of output and stability of idle speed were analyzed. The formation of carbon deposits within the suction manifold was investigated through a test device (KD147). In the intake manifold, the exhaust cleaning effect was confirmed.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.110-115
• /
• 2015

In this paper it is proposed to solve the problem of particulate matter reducing apparatus of the current DPF. One exhaust gas passage 2-way controlled to purify the exhaust gas generated during combustion efficiently. Through the control of the rotary valve within a single device, it is possible to prevent the exhaust pressure increases due to particulate matter accumulate inside the developing DPF. Develop DPF device capable of inducing a high efficiency of the output in order to improve the problem of reducing the engine output and fuel efficiency.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.101-108
• /
• 2021

This paper proposes a parallel control method of a modular DC/DC converter for electric vehicle (EV) chargers. The EV chargers have been increasing the power capacity using modular converters. There are output current imbalances between the modules, which are caused by the difference of the impedance, delay of the gate driver, and error of the sensors. The conventional strategies for the equal distribution of the output current cause the voltage drop or the high volume and cost of the converters. Therefore, the proposed parallel control strategy effectively balances the output current of modules using a current compensation method. The proposed strategy is verified by simulations. Additional experimental results will be added under various conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.909-916
• /
• 2021

3D printing has the advantage of providing opportunities for individuals to truly realize their creativity. An increasing number of people want to take advantage of this feature but they have lack opportunities for suitable printing training and struggle with problems with incorrect printing methods. Therefore, the lowered print quality lowers the interest of the user, and the 3D printer is not used gradually. In this study, we directly operate the device by identifying and analyzing the problems occurred to solve malfunctions of 3D printers and improve the convenience for user. In particular, we are conducting research on solving and mitigating problems with seating, stringing and nozzle clogging. In addition, the method of reducing material consumption and shortening the printing time was considered through experiments on the functions of 3D printers. Finally, by solving the printing problem that occurs frequently during 3D printing, it was possible to obtain a printed product with a complete appearance and improved convenience.

• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.47-54
• /
• 2019

As absorption type heat pump for waste heat recovery is installed in combined cycle power plant for Energy Service Company, performance test is implemented to confirm the operation data on partial load. The operation data changes according to the heat pump operation on partial load are as follows. Total heat output increases, because waste heat of closed cooling water and a portion of LP steam from HRSG is supplied. But electric power output of steam turbine is reduced, because LP steam to steam turbine is reduced. And heat output from HP district heater and LP district heater is reduced, because HP turbine exhaust steam to HP district heater and LP district heater is reduced. On partial load operation, turbine output reduction is higher than the base load operation. Therefore, on partial load, heat pump should be operated in consideration of the heat output increase and electric power output reduction.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.2
• /
• pp.11-19
• /
• 2024

Demand for small biomimetic robots that can carry out reconnaissance missions without being exposed to the enemy in underground spaces and narrow passages is increasing in order to increase the fighting power and survivability of soldiers in wartime situations. A small compound eye image sensor for environmental recognition has advantages such as small size, low aberration, wide angle of view, depth estimation, and HDR that can be used in various ways in the field of vision. However, due to the small lens size, the resolution is low, and the problem of resolution in the fused image obtained from the actual compound eye image occurs. This paper proposes a compound eye image quality enhancement algorithm based on Image Enhancement and ESRGAN to overcome the problem of low resolution. If the proposed algorithm is applied to compound eye image fusion images, image resolution and image quality can be improved, so it is expected that performance improvement results can be obtained in various studies using compound eye cameras.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.147-156
• /
• 2005

CGI is a standard interface rule between web server and gateway devised for the gateway's standard output to replace a static web document in UNIX environment. So, it is common to use standard I/O statements provided by the programming language for the CGI gateway. But the standard I/O mechanism is one of buffer strategies that are designed transparently to operating system and optimized for generic cases. This means that it nay be useful to apply another optimization to the standard I/O environment in CGI gateway. In this paper, we introduced standard output method and file output method as the two output optimization areas for CGI gateways written in C language in the UNIX/LINUX systems, and applied the proposed methods of each area to Debian LINUX, IBM AIX, SUN Solaris, Digital UNIX respectively. Then we analyzed the effect of them focused on execution time. The results were different from operating system to operating system. Compared to normal situation, the best case of standard output area showed about $10{\%}$ improvement and the worst case showed $60{\%}$ degradation in file output area where some performance improvements were expected.

• Journal of the Korean Magnetics Society
• /
• v.22 no.6
• /
• pp.200-203
• /
• 2012

In this study, we have investigated that the operation frequency dependences of the output properties of the orthogonal fluxgate sensor which was fabricated with a ferrite core. An orthogonal fluxgate sensor should be operated in as high as possible frequency to enhance its sensitivity in the case of small sized sensor, because sensitivity of the sensor is proportional to cross section area, winding number and operation frequency. In this study, we investigated the correspondence of the frequency dependence of output and the reactance (inductance and capacitance) of pickup coil and cable. Experimental results represented that we could obtain maximum output (= sensitivity) at optimal frequency which is near LC resonance frequency of the pickup coil and cable.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.13-16
• /
• 1999

이산 HMM을 이용한 음성인식을 할 때, 관측심볼은 훈련 데이터의 양자화과정을 수행하여 얻게 된다. 훈련 데이터는 선정된 몇몇 화자에 의해서 얻어지게 되는데, 이러한 이유로 인하여 충분하지 못한 훈련 데이터가 얻어지므로, 관측 심볼에 따라 출력확률분포값이 영(zero)이나, 거의 영에 가까운 값을 가지게 된다. 이러한 요인은 인식률의 저하를 초래하므로, 본 논문에서는 fuzzy smoothing 기법을 채택하여, 출력확률분포값이 영(zero)의 값을 가지는 것을 방지하여, 새로 구해진 파라메터로 인식실험을 하였다. Smoothing과정을 수행한 후의 인식률이 smoothing을 하진 않은 인식율에 비해 평균 $1.46\%$ 향상되었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.27-30
• /
• 2000

본 논문은 HMM(Hidden Markov Model)을 이용하여 인식을 수행할 경우의 오류를 최소화 할 수 있는 후 처리 과정으로 신경망을 결합시켜 HMM 단독으로 사용하였을 때 보다 높은 인식률을 얻을 수 있는 HMM과 신경망의 하이브리드시스템을 제안한다. HMM을 이용하여 학습한 후 학습에 참여하지 않은 데이터를 인식하였을 때 오인식 데이터를 정인식으로 인식하도록 HMM의 출력으로 얻은 각 출력확률을 후 처리에 사용될 MLP(Multilayer Perceptrons)의 학습용으로 사용하여 MLP를 학습하여 HMM과 MLP을 결합한 하이브리드 모델을 만든다. 이와 같은 HMM과 신경망을 결합한 하이브리드 모델을 사용하여 단독 숫자음과 4연 숫자음 데이터에서 실험한 결과 HMM 단독으로 사용하였을 때 보다 각각 약 $4.5\%$, $1.3\%$의 인식률 향상이 있었다. 기존의 하이브리드 시스템이 갖는 많은 학습시간이 소요되는 문제점과 실시간 음성인식시스템을 구현할 때의 학습데이터의 부족으로 인한 인식률 저하를 해결할 수 있는 방법임을 확인할 수 있었다.