• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1275-1279
• /
• 2008

도시지역은 도시형 수해발생, 갈수시의 급수안전도 저하, 평시 하천유량의 감소, 공공수역의 수질악화, 지하수 오염 등 여러가지 문제에 직면하고 있다. 개발로 인한 수환경의 피해를 최소화하기 위한 대안적인 설계방안이 필요하며, 이를 위해서는 개발 전후 물순환 환경 변화에 대한 정량적인 해석이 가장 우선적으로 수행되어야 한다. 본 연구에서는 우리나라와 일본에서 도시유역에의 적용이 활발한 물리적 개념의 분포형 수문모형인 WEP(Water and Energy transfer Process) 모형을 통해 행정중심복합도시 개발 전후의 물순환 변화를 해석하였다. 정밀한 해석을 위해 대상유역을 100m 크기의 정방형 격자로 구분하고 기상 조건, 지표면 조건, 하천, 토양, 지하대수층, 농업용수 이용 등 물순환에 관련된 광범위한 입력자료는 기존 측정 자료 및 관련 문헌, 현장 조사를 통해 각각 구축하였다. 모의의 전 후처리는 WEP+를 통해 수행되었는데, WEP+는 WEP 모형의 방대한 양의 입력자료를 효과적으로 구축하고, 다양한 시계열 및 공간분포 출력자료를 효과적으로 분석할 수 있는 인터페이스를 지닌 전 후처리 프로그램이다. 개발로 인한 물순환 변화는 절성토로 인한 지형 및 토양 조건 변화, 토지이용 및 용수이용 변화에 대한 개발 계획을 모형 입력자료로 구축한 후, 개발전과 동일한 기상조건과 초기 모의조건 하에서 각각 11년간 모의하여 수문 요소 변화를 비교하는 방법을 사용하였다. 물순환 해석 결과는 개발 전후 모의에 대해 유황곡선 및 물수지, 수문요소 공간분포 비교를 통해 수행하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.40-49
• /
• 1995

Application of the filtered-x LMS adaptive filter to active noise cancellation requires to estimate the transfer charactersitics between the output and the error signal of the adaptive canceler. In this paper, we derive the filtered-x adaptive noise cancellation algorithm and analyze its convergence behavior when the acoustic noise consists of multiple sinusoids. The results of the convergence analysis of the filtered-x LMS algorithm indicate that the effects of the parameter estimation inaccuracy on the convergence behavior of the algorithm are characterized by two distinct components : Phase estimation error and estimated gain. In particular, the convergence is shown to strongly affected by the accuracy of the phase response estimate. Simulation results are presented to support the theoretical convergence analysis.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2000

The error diffusion technique is frequently utilized for the digital Imaging output devices to convert continuous level Image into bi-level Image It Yields the binary image with the high frequency emphasis that gives a pleasing perception to human eyes But, due to the non-homogeneous distribution of dots, It exhibits undesirable patterns that degenerate the perceived quality Various techniques have been proposed to Improve the Image quality by the error diffusion techniques In this paper, the cause of non-homogeneity of dot distribution is analyzed first. A threshold modulation technique that employs a simple sinusoidal function is proposed in this paper The proposed method achieves the homogeneous dot distribution by forcing the minor pixels on the binary Image to maintain the principal distance defined according to their gray levels. It also minimizes the void and clusters of minor pixels.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.96-101
• /
• 2011

It is well known that the Capon algorithm offers better resolution compared to that of the FM (Fourier method) algorithm by minimizing the total output power while maintaining a constant gain in the look direction. Unfortunately, the DoA (Direction of Arrival) estimation performance of the Capon algorithm is drastically degraded when the SNR of received signal is low and thus, it cannot distinguish among signal sources which have similar incidence angles. In this paper, we propose a novel scheme enhancing the resolution of the Capon algorithm by ing all rows except the first row of an inverse covariance matrix.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.157-165
• /
• 2013

In this paper, efficient digit-serial VLSI architecture for 1D (9,7) lifting-based discrete wavelet transform (DWT) filter has been proposed. The proposed architecture computes the DWT in digit basis, so that the required hardware is reduced. Also, the multiplication is replaced with the shift and add operation to minimize the hardware requirement. Bit allocation for input, output, and the internal data has been determined by analyzing the PSNR. We have carefully designed the data feedback latency not to degrade the performance in the recursive folded scheduling. The proposed digit-serial architecture requires small amount of hardware but achieve 100% of hardware utilization, so we try to optimize the tradeoffs between the hardware cost and the performance. The proposed architecture has been designed and verified by VerilogHDL and synthesized by Synopsys Design Compiler with a DongbuHitek $0.18{\mu}m$ STD cell library. The maximum operating frequency is 330MHz with 3,770 gates in equivalent two input NAND gates.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.51-56
• /
• 2012

In order to fabricate through-Si-vias for thermal vias by using wet etching process, anisotropic etching behavior of Si substrate was investigated as functions of concentration and temperature of TMAH solution in this study. The etching rate of 5 wt%, 10 wt%, and 25 wt% TMAH solutions, of which temperature was maintained at $80^{\circ}C$, was $0.76{\mu}m/min$, $0.75{\mu}m/min$, and $0.30{\mu}m/min$, respectively. With changing the temperature of 10 wt% TMAH solution to $20^{\circ}C$ and $50^{\circ}C$, the etching rate was reduced to $0.067{\mu}m/min$ and $0.233{\mu}m/min$, respectively. Through-Si-vias of $500{\mu}m$-depth could be fabricated by etching a Si substrate for 5 hours in 10 wt% TMAH solution at $80^{\circ}C$ after forming same via-pattern on each side of the Si substrate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1000-1009
• /
• 2008

The purpose of this paper is to analyze the performance of MB-OFDM UWB system when the interference signal that can be WIMAX signal or 4 G system signal is received by detection limit of -80 dBm/MHz proposed in Korea for DAA(Detect And Avoid) to permit UWB in $3.1{\sim}4.8$ GHz. MB-OFDM UWB system supports two transmission modes; one is TFI(Time frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. In this paper, we considered the TX average power and the synchronization structure to reflect the effect of frequency hopping according to TFC. Interference analysis results show that the WiMAX system is fenced thoroughly from UWB interference in domestic DAA regulation, but the performance of MB-OFDM UWB system is degraded seriously by an interference signal with the DAA detection limit even in frequency Hopping mode that can get frequency diversity effect.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.24-29
• /
• 2005

In the fuzzy control for the multi-variable system, it is difficult to obtain the fuzzy rule. Therefore, the parallel structure of the independent single input-single output fuzzy controller using a pairing between the input and output variable is applied to the multi-variable system. However, among the input/output variables which arc not paired the interactive effects should be taken into account. these mutual coupling of variables affect the control performance. Therefore, for the control system with a strong coupling property, the control performance is sometimes lowered. In this paper, the effect of mutual coupling of variables is considered by the introduction of a neuro-fuzzy controller using relative gain matrix. This proposed neuro-fuzzy controller automatically adjusts the mutual coupling weight between variables using a neural network which is realized by back-propagation algorithm. The good performance of the proposed nero-fuzzy controller is verified through computer simulations on 200MW boiler systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.78-84
• /
• 2012

Mold may experience deterioration of molding quality as the abrasion of mold occurring due to friction between mold and molded product works as allowance in the course of press process. Therefore, to improve the wear-resistance of mold, methods like nitriding, carburizing, flame and induction surface hardening treatment etc have been applied. However, as such methods are accompanied by problems like shape limitation or product deformation etc, laser surface treatment technology is under review as surface treatment method that can solve such problems. Therefore, in this study, mold material cast iron was surface-treated by using high power diode laser. In previous report 1 and report 2, the heat treatment characteristics were compared by the differences of die materials and shapes, then this paper observed microstructure by using optical microscope and scanning electronic microscope to analyze the structural difference of hardened zone, interface area and base metal after heat treatment. And the structural condition was grasped through EDS. As a result of microstructure, hardened zone showed formation of acicular martensite.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.99-108
• /
• 2020

In this paper, we analyze the most suitable RA method among PAMA, DAMA, and RA classified by the multiple access method of satellite communication in the rapidly changing traffic environment according to the emergency and tactical situation. It suggests an alternative to improve the limit of output degradation. Based on the CRDSA protocol selected as the standard of DVB-RCS2 among the current satellite communication methods, CRDSA2R (Contention) maintains an optimal RA channel environment by checking the limitations in an environment where packet volume is rapidly increasing and observing channel load and channel conditions. We propose a Resolution Diversity Slotted ALOHA with Adaptive Random Access.