• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.08a
• /
• pp.175-178
• /
• 2008

In this paper, we introduce the considerations of pseudo range generation process of GNSS system and propose the design structure and show the simulation results applied to GPS. A Pseudo range generation simulator for GNSS(Global Navigation Satellite System) provides the generation function of GNSS constellations, the acquisition function of satellites position, the generation function of true range between satellites and user receiver, the generation functions for individual error features generated through the signal is travelled, and the calculation function of pseudo range. In addition, the simulator is designed to provide the output files of RINEX format.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.2
• /
• pp.183-190
• /
• 2007

In this paper, a robust controller for PWM converter is proposed. The proposde converter controller consists of a PI controller for DC output voltage and a current controller using error-space approach for maintaining the sinusoidal current waveform and unity power factor. Conventionally, the try and error method has been used to design the current controller considering the switching frequency of the devices and sampling frequency of the digital controller. But this proposed method is based on characteristic ratio assignment(CRA) method which has the advantage to design the optimal gain to meet the referenced response and overshoot within the limit range. First, the CRA based current controller algorithm is explained. Then the validity of proposed controller is verified through the PSiM simulation and experience results.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.27-36
• /
• 2014

Generally, satellites continuously monitor that its major functions are working properly and their hardware are in a good status using several SOH data. In case a fault that is not recognized as a temporal problem or a failure that can be considered to propagate its damage to the other parts are detected, fault management logic is performed automatically without any contact of ground station. In this paper, attitude error detection using sun sensors on a rotating solar array is proposed. Attitude error can be detected by comparing the offset angle between the actual data computed from the sun sensor and the data predicted from the orbit and ephemeris information for the two types of solar array operation method. During the eclipse, the output of attitude error detection method becomes zero because the sun sensor output cannot be provided. Finally, the proposed method is analyzed through the data processing using on-orbit data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.719-731
• /
• 1991

This paper introduces a relatively simple computer simulation method for analyzing trajectory of electron beam in cylindrical electrode of the CRT, which outputs the cutoff voltag, beam current, spot size and plots out the trajectory, rom the input data on physical construction and applied voltages of electron gun. In order to improve computing speed in obtaining potential distibution, the authors have ivided the space into seveal setos and allocated different mesh sizes epending on the acuracy required to each sector and applied the finite difference method in calculation. The plot of trajectoy obtained from the simulation provided useful insight into the focusing mechanism of the CRT. The computed and measured result including beam curent. spot sizs and cutoff voltages for several model guns have ageed within eperimental error. The simulation program enables the designer to compare the effects of varied electrode shpe without the epense of building an actual gun and may be appli in esigning and implementing the electron gun assemply.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.513-521
• /
• 2002

This paper proposes a gamut mapping algorithm based on color space division for cross media color reproduction. As each color device has a limited range of producible colors, reproduced colors on a destination device are different from those of the original device. In order to reduce the color difference, the proposed method divides the whole gamut into parabolic shapes based on intersecting lightness by the just noticeable difference (JND) and the original device gamut boundary. Dividing the gamut with parabolic shapes and piecewise mapping of each region not only considers gamut characteristics but also provides for mapping uniformity. Also the lightness variations are more sensitive to the human visual system and by using lightness JND it can restrict lightness mapping variations that are unperceivable to enhance lightness contrast and chrominance. As a result, the proposed algorithm is able to reproduce high quality images using low-cost color devices.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.7
• /
• pp.540-547
• /
• 2004

Since speech enhancement algorithms based on Kalman/Wiener filter require a priori knowledge of the noise and have focused on the minimization of the variance of the estimation error between clean and estimated speech signal, small estimation error on the noise statistics may lead to large estimation error. However, H/sub ∞/ filter does not require any assumptions and a priori knowledge of the noise statistics, but searches the best estimated signal among the entire estimated signal by applying least upper bound, consequently it is more robust to the variation of noise statistics than Kalman/Wiener filter. In this paper, we Propose a speech enhancement method using HMM and multi H/sub ∞/ filters. First, HMM parameters are estimated with the training data. Secondly, speech is filtered with multiple number of H/sub ∞/ filters. Finally, the estimation of clean speech is obtained from the sum of the weighted filtered outputs. Experimental results shows about 1dB∼2dB SNR improvement with a slight increment of computation compared with the Kalman filter method.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.648-653
• /
• 2018

Analysis of a specific wavelength band of a video signal is an old research field. However, studies on the analysis of signals having the characteristics of a specific wavelength band or the generation of samples have been conducted actively in recent years. In this paper, we analyze the signal of digital halftoned image. The interpretation of halftoning in terms of signals was first made by Ulichney. We have come to the view that the signal characteristics between pixels used for half toning are good for blue noise. Lau has developed a halftoning method that uses green-noise characteristics by using output-dependent feedback as an error diffusion method. Jho has developed a method for producing halftoned images using a reaction diffusion model. In this paper, we analyze reaction diffusion halftoning in terms of signal to show green noise and compare it with existing green noise half tone.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.155-160
• /
• 2005

Purpose : Many authors have been introduced field in field technique and 3-D conformal radiotherapy that increased the tumor dose as well as decreased the dose of abutting critical organ. These technique have multiple beam direction and small beam segments even below 10 MU(monitor unit)for each field. we have confirmed the influence of low MU on dose output and beam stability. Materials and Methods : To study the dose output, the dose for each field was always 90MU, but it divided into different segment size: 1, 2, 3, 5, 10, 15 segments, 90, 45, 30, 18, 9, 6 MU the measurements were carried out for X-ray energy 4 MV, 6 MV, 10 MV of three LINAC(Varian 600C, 2100C, 2100C, 2100C/D), in addition each measurement was randomly repeated three times for each energy. To study the field symmetry and flatness, X-omat V films were irradiated. After being developed, films were scanned and analyzed using densitometer. Results : Influence of low MU on dose is slightly more increase output about $1.2{\sim}2.9%$ in cGy/mu than 90MU, but may not changed beam quality(flatness or symmetry), Output stability depends on dose rate(PRF)rather than beam energy, field size. Conclusion : Presented result are under the limits(out put<3%, flatness<${\pm}3%$, symmetry<2%). The 3 accelerators are safe to use and to perform conformal radiotherapy treatments in small segments, small MU around 10MU. but Even if the result presented here under the limits, continuous adjustments and periodic QA should be done for use of small MU

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.375-383
• /
• 2020

This study aimed to propose a methodology for quantitatively analyzing problems resulting from the performance and combination of the ionization chamber when using an automatic exposure control (AEC) and to optimize the performance of the digital radiography (DR). In the experimental method, the X-ray quality of the parameters used for the examination of the abdomen and pelvis was evaluated by percentage average error (PAE) and half value layer (HVL). Then, the stability of the radiation output and the image quality were analyzed by calculating the entrance surface dose (ESD) and entropy when the three ionization chambers were combined. As a result, all of the X-ray quality of the digital radiography used in the experiment showed a percentage average error and a half value layer in the normal range. The entrance surface dose increased in proportion to the combination of chambers, and entropy increased in proportion to the combination of ionization chambers except when three chambers were combined. In conclusion, analysis using entrance surface dose and entropy was found to be a useful method for evaluating the performance and combination problems of the ionization chamber, and the optimal performance of the digital radiography can be maintained when two or less ionization chambers are combined.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.12-18
• /
• 1991

Three-dimensional nonlinear sloshing effects due to tank motions are simulated by solving boundary value problem using the panel method based on boundary integral technique. While Shinkai used boundary elements on which source strengths vary linearly between nodes, the source of constant strength is distributed on each triangular panel in the present study. The source strength at each time step is determined by solving the Fredholm integral equation of the second kind obtained from Green's theorem. To avoid cumulative numerical errors as time elapses, Adam-Bashforth-Moulton method is employed. Numerical examples for the case of partially filled spherical tank on board oscillating in harmonic sway mode or pitch mode are solved. The elevation of the free surface is compared with the result by Shinkai and confirmed in good agreement during early time. The input and the output energy are comparatively evaluated to check the overall accuracy of the present numerical scheme. Although some leakage of energy are found as time marches, it is plausible when we take into account nonlinearities of the problem and the number of panels of the model.