• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.6
• /
• pp.503-510
• /
• 2002

This paper presents a fault diagnosis method using neural network-based multi-fault models and statistical method to detect and isolate faults in nonlinear systems. In the proposed method, faults are detected when the errors between the system output and the neural network nominal system output cross a predetermined threshold. Once a fault in the system is detected, the fault classifier statistically isolates the fault by using the error between each neural network-based fault model output and the system output. From the computer simulation results, it is verified that the proposed fault diagonal method can be performed successfully to detect and isolate faults in a nonlinear system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.42-50
• /
• 2002

In this paper, we propose an FDI(fault detection and isolation) method using neural network-based multi-fault models to detect and isolate faults in nonlinear systems. When a change in the system occurs, the errors between the system output and the neural network nominal system output cross a threshold, and once a fault in the system is detected, the fault classifier statistically isolates the fault by using the error between each neural network-based fault model output and the system output. From the computer simulation results, it is verified that the proposed fault diagonal method can be performed successfully to detect and isolate faults in a nonlinear system.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.181-183
• /
• 2004

본 논문은 패킷 방식의 OFDM(orthogonal frequency division multiplexing) 시스템에서 등화기 출력과 비터비 복호기 출력을 이용한 잔존 주파수 옵셋 추정 법을 제안한다 패킷 방식의 OFDM에서는 패킷의 앞 부분의 훈련열을 이용하여 한번 추정하기 때문에 시간이 지남에 따라 추정 오차에 의한 위상 회전이 축적된다. 이러한 위상 회전의 축적을 막기 위해 등화기 출력과 비터비 복호기의 출력에서 잔존 주파수 옵셋을 추정하여 매 심볼마다 보상한다. 잔존 주파수 옵셋의 추정은 먼저 첫 번째 심복의 등화기 출력과 그것의 비터비 복호기 출력 사이에서 위상차를 구한다. 두 번째 심복의 위상차도 처음 심복과 같은 방법으로 구한다. 두 번째 구한 위상차는 이전 심볼의 위상차에서 잔존 주파수 옵셋의 영향이 더해져 있다. 이득 두개의 위상차의 차로부터 잔존 주과수 옵셋을 구할 수 있다. 이 방법은 전송된 데이터를 사용하여 추정하기 때문에 추가적인 훈련열을 사용하지 않고 매 심볼마다 보상을 할 수 있다는 장점이 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.809-823
• /
• 1991

본 연구에서는 Wiener 필터링 이론에 의하여 소음원의 입력신호에 대한 최적 한 예측을 할 수 있는 최적예측기(optimal predictor)로써 부가적인 음을 발생시키고 입력신호 및 출력신호 간의 차인 오차를 최소화시키도록 하는 적응신호처리방법에 대 해 설명하고 이러한 적응 신호처리 방법을 이용한 능동 소음 제어 방법을 제시하였다. 이와 아울러 제어계의 환경 변화에 따른 파라메타의 변화에 적응적으로 응답이 가능해 야 하는 적응 소음 제어계에서, 음향궤환과 함께 필히 고려해야하는 부가적인 전달함 수-모델과 스피커를 포함하는 보조경로 및 오차미이크로폰을 포함하는 오차경로의 전 달함수의 영향을 고려한 능동소음제어에 대해 연구하였다.

• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.34-44
• /
• 2012

This paper proposes a practical compensation method by using digital signal processing over the creep error which is representative in strain gauge loadcell. The signal compensation method carry out the simulation by deciding compensation constant (time constant) and coefficient measuring the loadcell output response. Then, compensation constant and coefficient are stored on the microprocessor. By using calculated on microprocessor creep error compensation values, weighting value is showed as a digital signal by reducing error values measured through output signals of loadcell. In addition, we apply error compensation method in order to have a dedicated software for loadcell electronic scale. This technique is useful because it has great influence on error rate reduction that has been produced by conventional electronic scales (0.03%). As a result our technique gives better accuracy (0.01%~0.003%) as what is given by digital electronic scale, while it has less complex operation processing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.955-964
• /
• 2010

In this paper, a compensation method of the amplitude and phase errors from the T/R(Transmit/Receive) modules in an active SAR(Synthetic Aperture Radar) system is introduced. The errors are defined and classified, and characterized by analyzing the measurement data acquired from the pilot test. To compensate these errors, a control methodology of T/R modules output is proposed. Before the compensation is applied, 16 T/R modules integrated on the active SAR antenna show the amplitude in 28.2~29.0 dBm and the phase in $101.7^{\circ}{\sim}165.2^{\circ}$. After the compensation, the amplitude and phase are distributed in 27.4~28.0 dBm and $116.1^{\circ}{\sim}120.0^{\circ}$ respectively. The antenna beam patterns generated by the array theory with the distributions are compared, and the proposed method is verified as good to apply for the active SAR system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.1-7
• /
• 2003

This paper introduces a robust sliding mode repetitive control method for a class of nonlinear system. The sliding mode controller stabilizes the overall system and makes the tracking error converge to some residual set. Also, tile repetitive learning controller makes the tracking error converge to zero. Unlike other methods, the proposed sliding mode controller reduces the chattering effects in the steady state without using high-order sliding manifold approach.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.85-90
• /
• 2003

This paper presents an adaptive PID control scheme for nonlinear system. TSK(Takagi-Sugeno-Kang) fuzzy model is used to estimate the error of control input, and the parameters of PID controller are adapted using the error. The parameters of TSK fuzzy model also adapted to plant. The proposed algorithm allows designing adaptive PID controller which Is adapted to the uncertainty of nonlinear plant and the change of parameters. The usefulness of the proposed algorithm is also certificated by the several simulations.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.67-75
• /
• 1998

Although the nCE(n-th order cross-entropy) error function resolves the incorrect saturation problem of conventional EBP(error back-propagation) algorithm, the performance of MLP's (multilayer perceptrons) trained using the nCE function depends heavily on the order of the nCE function. In this paper, we propose an adaptive learning rate to make the performance of MLP's insensitive to the order of the nCE error. Additionally, we propose a limited error signal of output node to prevent unstable learning due to the adaptive learning rate. The effectiveness of the proposed method is demonstrated in simulations of handwritten digit recognition and thyroid diagnosis tasks.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.10 s.340
• /
• pp.29-34
• /
• 2005

The maximum quantization error has serious effect on the performance of fixed-width multipliers that receive W-bit inputs and produce W-bit products. In this paper, we analyze the error bound of fixed-width modified Booth multipliers. Then, the estimation method for the number of additional columns for fixed-width multipliers is proposed to limit the maximum quantization error within a desired bound. In addition, it is shown that our methodology can be extended to reduced-width multipliers. By simulations, it is shown that the proposed error analysis method is useful to the practical design of fixed-width modified Booth multipliers.