• Current Research on Agriculture and Life Sciences
• /
• v.28
• /
• pp.53-62
• /
• 2010

The effect of far-infrared (FIR) irradiation on the functional compounds of grape seeds extract were evaluated. Grape seed was dried on different heating power (0, 900, 1800 W) and heating time (0, 20, 40 min) with far-infrared drier. Contents of soluble solids, catechins, total phenolics and total flavonoids along with Hunter's color value, electron donating ability (EDA) and nitrite scavenging activity were analyzed. The soluble solids, Hunter's L value and a value were not significantly different from control samples. Cathechin, procyanidin $B_2$ and epicatechin contents changed with heating time. In the treated sample, total cathechins content was found maximum at 900 W of heating power and 20 min of heating time with a high level of total phenolics, total flavonids and EDA. These results indicated that FIR irradiation of grape seed could enhance antioxidant activities of its extracts by increasing the amounts of functional compounds. Moreover, response surface methodology(RSM) was applied to predict optimum conditions for heating by FIR rays of grape seeds. Based on superimposition of contour map with respect to total phenolics, total catechin and EDA, optimum ranges of heating conditions were heating power of 621.82~818.18 W and heating time of 16.3~19.83 min.

• Science of Emotion and Sensibility
• /
• v.15 no.4
• /
• pp.503-516
• /
• 2012

According to the researches of robot and software agent until now, computational emotion model is dependent on system, so it is hard task that emotion models is separated from existing systems and then recycled into new systems. Therefore, I introduce the Engine of computational Emotion model (shall hereafter appear as EE) to integrate with any robots or agents. This is the engine, ie a software for independent form from inputs and outputs, so the EE is Emotion Generation to control only generation and processing of emotions without both phases of Inputs(Perception) and Outputs(Expression). The EE can be interfaced with any inputs and outputs, and produce emotions from not only emotion itself but also personality and emotions of person. In addition, the EE can be existed in any robot or agent by a kind of software library, or be used as a separate system to communicate. In EE, emotions is the Primary Emotions, ie Joy, Surprise, Disgust, Fear, Sadness, and Anger. It is vector that consist of string and coefficient about emotion, and EE receives this vectors from input interface and then sends its to output interface. In EE, each emotions are connected to lists of emotional experiences, and the lists consisted of string and coefficient of each emotional experiences are used to generate and process emotional states. The emotional experiences are consisted of emotion vocabulary understanding various emotional experiences of human. This study EE is available to use to make interaction products to response the appropriate reaction of human emotions. The significance of the study is on development of a system to induce that person feel that product has your sympathy. Therefore, the EE can help give an efficient service of emotional sympathy to products of HRI, HCI area.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.18-18
• /
• 2010

전기적 에너지를 기계적 에너지로 변환하고 또한, 기계적 에너지를 전기적 에너지로 변환할 수 있는 압전 세라믹스는 압전 변압기 (piezoelectric transformer), 초음파 모터, 센서 등과 같은 응용분야에 광범위하게 사용되고 있다. 특히, 전원장치에 있어서 현재 주요 전자제품에 사용되고 있는 권선형 변압기와 같은 전자 변환기의 대체품으로 압전 세라믹스 소재의 특성을 이용한 압전변압기의 개발과 응용연구는 국내외적으로 활발히 연구되어왔다. 압전변압기는 권선형 변압기와 비교 하였을 때 누설자속이 없어 노이즈 발생이 없고, 공진주파수만을 이용하므로 출력의 파형이 정현파에 가까워 고조파 잡음이 없으며, 불연성의 특징을 가지고 있다. 추가적으로 압전 변압기는 소형화, 슬림화, 경량화가 가능하며 90%이상의 높은 효율을 얻을 수 있다. 또한, 단판형 압전변압기의 출력한계를 개선하기 위해 높은 승압비와 고출력을 갖는 적층타입의 압전변압기가 제안되었다. 압전변압기용 조성 세라믹스는 높은 에너지 변환효율을 위해서 전기기계결합계수 ($k_p$)가 커야 하며, 발열에 의한 온도 상승을 억제하기 위하여 기계적 품질계수(Qm)가 큰 것이 바람직하다. 또한, 높은 전류를 발생하기 위해서는 유전상수가 커 압전변압기의 출력측 정전용량을 크게 하여야한다. 이러한 압전변압기의 제작 조건을 위해 우수한 압전 및 유전특성을 갖는 PZT계 세라믹스가 주로 사용 되어져 왔다. 그러나, PZT계 세라믹스의 우수한 압전 및 유전특성에도 불구하고 $1000^{\circ}C$에서 급격히 휘발하는 PbO의 성질 때문에 환경적으로나 인체의 건강문제로 인해 전세계적으로 그 사용량을 제한하고 있다. 또한 적층 압전변압기의 구조적 특성상 내부전극과 함께 소결하여야 하는데, 이때 소결온도가 높으면 값비싼 Pd합량이 높은 전극을 사용하여야 한다. Pd함량이 10%미만인 Ag/Pd 전극을 사용하기 위해서는 $950^{\circ}C$ 이하에서 저온소결이 가능한 세라믹스 제조가 필수적이라 할 수 있다. 소결온도를 낮추는 방법으로는 다른 물질들을 치환하여 소결온도를 낮추는 방법과 미세분말을 만들어 그레인사이즈를 미세화 하는 방법들이 있다. 많은 미세 분말 제조 방법 중에서 Attrition mill은 일반적인 ball mill에 비해 분말의 입도를 미세하게 할 수 있어 증가된 분말의 비표면적에 의하여 반응을 촉진시킴으로써 저온소결이 가능한 세라믹스를 만들 수 있다. 따라서 본 연구에서는 소결온도가 낮으면서도 유전 및 압전특성이 우수한 조성을 사용하여 적층 압전변압기를 제작하여 전기적 특성을 조사하였다.

• Nuclear Engineering and Technology
• /
• v.10 no.2
• /
• pp.65-72
• /
• 1978

In this paper, it is attempted to investigate the phenomena of iodine stress corrosion cracking of Zircaloy-4 cladding failures in reactor through the results of similar out-of-pile test in iodine vapour. The main result of this experiment is a finding of the relation between the threshold stress which can lead to iodine stress corrosion cracking of Zircaloy-4 tube and the iodine concentration. The values of critical stress and the critical iodine concentration are also obtained. A model which relates failure time of Zircaley-4 tube to failure stress and iodine concentration is suggested as follows: log t$_{F}$ =5.5-(3/2)log$_{c}$-4log $\sigma$ where t$_{F}$ : failure time, minutes c: iodne concentration, mg/㎤ $\sigma$: stress, 10$^4$psi.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2000

The SiOxNy thin films were prepared on Si(lOO) by reactive RF sputtering method. The reactive gas ratio and the power were used as parameters for depositing SiOxNy thin fims. The properties of ${SiO_x}{N_y}$ thin tilms were investigated by XRD, XPS, refractive index and extinction coefficient analyzer (n'||'&'||'k analyzer), and FfIR. It was found by the results of the x-ray diffraction measurement that SiOxNy thin films were grown to an amorphous structure. From the results of the XPS, and the n'||'&'||'k analyzer, it was found that refractive index was intended to increase with the increasement of the relative nitrogen contents of the ${SiO_x}{N_y}$ thin films.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.168-176
• /
• 1989

Theoretical analysis of HF chemical laser models are performed through chemical reaction kinetics, gain process and stimulated emission process. A chemical laser of F+$H_2$ nonchain reaction is investigated through V-R transitions of excited HF for vibrational levels up to v = 3 and rate equations including nonchain pumping and deactivation. On this analysis, harmonic and anharmonic vibrational levels are considered separately and the results of the corresponding power calculations are showed very small difference between the two. Output powers are calculated with variation of temperature and initial concentrations of $H_2$. A HF chemical laser of $H_2$+$F_2$ chain reaction is also simulated with a premixed initial condition. Results of present model calculations are satisfactory through comparison with detailed calculations reported by others.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.419-427
• /
• 2009

To test applicability for continuous flow treatment of ultrasound technology, sonolysis of TCE aqueous solution using 584 kHz multi irradiation reactor was performed under batch and continuous flow conditions. Under batch condition (3 and 4 sides irradiation, 600 W), first order degradation rate constant of TCE was higher under 4 sides than 3 sides irradiation conditions, while the generation of $H_2O_2$ and chloride was similar under both irradiation conditions. Under continuous flow condition with 4 sides irradiation, removal efficiencies of TCE in steady-state were decreased from 83 to 48% with increasing flow rate from 67 to 300 mL/min at 600 W, and were increased from 14 to 75% with increasing acoustic power from 100 to 600 W at 100 mL/min. Removal efficiency of TCE in groundwater was decreased 10% compared to in distilled water at 100 mL/min and 600 W.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.648-653
• /
• 2018

Analysis of a specific wavelength band of a video signal is an old research field. However, studies on the analysis of signals having the characteristics of a specific wavelength band or the generation of samples have been conducted actively in recent years. In this paper, we analyze the signal of digital halftoned image. The interpretation of halftoning in terms of signals was first made by Ulichney. We have come to the view that the signal characteristics between pixels used for half toning are good for blue noise. Lau has developed a halftoning method that uses green-noise characteristics by using output-dependent feedback as an error diffusion method. Jho has developed a method for producing halftoned images using a reaction diffusion model. In this paper, we analyze reaction diffusion halftoning in terms of signal to show green noise and compare it with existing green noise half tone.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.395-402
• /
• 1997

The $SiO_2$ films were prepared by ECR(electron cyclotron resonance) plasma diffusion method, Deal-Grove model and Wolters-Zegers-van Duynhoven model were used to estimate the oxidation rate which was correlated with surface morphology for different orientation of Si(100) and Si(111). It was seen the $SiO_2$ thickness increased linearly with initial oxidation time. But oxidation rate slightly decrease with oxidation time. It was also shown that the oxidation process was controlled by the diffusion of the reactive species through the oxide layer rather than by the reaction rate at the oxide interface. The similar time dependency has been observed for thermal and plasma oxidation of silicon. From D-G model and W-Z model, the oxidation rate of Si(111) was 1.13 times greater than Si(100) because Si(111) had higher diffusion and reaction rate, these models more closely fits the experimental data. The $SiO_2$ surface roughness was found to be uniform at experimental conditions without etching although oxidation rate was increased, and to be nonuniform due to etching at experimental condition with higher microwave power and closer substrate distance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.807-818
• /
• 2020

In this study, hydrophones using acoustic sensors were used to estimate the amount of bedload discharge in a forested watershed. The reaction characteristics were analyzed through hydrophone flume tests and field tests, and the quantitative bedload discharge was calculated and compared with that measured by a pit sampler. The hydrophone reaction changed the pulse according to the flow rate change, but did not react to standard sand. The pulse was different depending on the particle size and weight, and accordingly, there was a specific channel showing a suitable response. For a hydrophone installed in the field, by using an automatic impact device, the reaction characteristics of each channel were analyzed to confirm normal operation of the sensor and the suitability of the output value of each channel. In addition, a suitable channel was selected for the estimation of bedload discharge. The bedload discharge formula was developed using a hydrophone pulse and the average flow rate, and was compared with the measured data in the pit sampler in the study site. As a result of the study, if a hydrophone is used for monitoring the bedload in forested watersheds, it is considered effective in quantitatively estimating the weight of bedload discharge.