• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.601-604
• /
• 2012

Recently, there have been many attempts to monitor the equipment's condition or the input devices in sensors remotely by using cable and wireless communications. Also, the research and development on this matter has been actively carried on. In this paper, we developed the monitoring system which will eliminate the errors of manual reading by humans and therefore will secure reliability between tenants and the building management office. Through the system, the private telecommunication network can be connected between the building management office and the households. This enables the control office to remotely read the electric meter and exact energy consumption of each household even when the tenants are absent.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.111-111
• /
• 2009

전 세계적으로 환경 보호의 차원에서 자동차 업체는 자동차의 연비 향상을 위한 차체의 경량화가 큰 이슈로 대두되고 있다. 이를 위해 알루미늄과 같은 경량화 소재를 이용하여 차체 조립에 투입하고자 연구 중에 있다. 이와 같은 레이저 용접 공정이 현장에 적용되기 위해서는 용접부의 품질을 실시간으로 모니터링하고 품질을 판단하여야 생산성을 극대화 할 수 있다. 그러므로 본 연구에서는 알루미늄 AA5182 알루미늄 판재의 용가 와이어를 이용한 레이저 용접에서 용접부를 모니터링 할 수 있는 시스템을 구축하였다. 이를 위하여 레이저는 4kW급 Nd:YAG 레이저를 사용하였고, 차체용 알루미늄 판재 AA5182 1.4t를 AA5356 와이어를 이용하여 용접을 수행하였다. 모니터링 센서로는 반응 범위가 190 mn~680 nm인 센서를 이용하였고, 용접 중 센서로부터 발생된 출력전류를, 신호 증폭기와 DAQ 보드를 통해 초당 10,000 samples/sec로 계측하였다. 다양한 용접조건을 이용하여 실험을 수행하였고 이를 정량적으로 분석하였다. 계측된 신호와 용접 품질은 비선형적 관계를 가지고 있으므로 본 연구에서는 용접 품질을 예측하는 방법으로 퍼지 패턴인식 알고리즘을 이용하는 방법과 계측 신호를 이용한 인장강도 예측모델을 이용하여 병렬로 품질평가를 할 수 있는 알고리즘을 구현하였다. 이를 위하여 계측된 신호와 용접 품질과의 관계를 이용하여 퍼지 규칙 베이스 정의하였고, 신경회로망 모델을 이용하여 인장강도 예측모델을 제시하였다. 또한 품질 평가 알고리즘을 기반으로 레이저 용접부의 품질평가가 가능한 GUI 프로그램을 구현하였다.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.109-109
• /
• 2009

최근 유럽의 완성차 업체에서 조립라인에 적용을 시작하고 있는 레이저 원격 용접기술은 저항 점용접에서의 문제점들을 동시에 해결하고 작업 시간을 획기적으로 감소시켜 생산성을 향상시킬 수 있는 용접공정으로 떠오르고 있다. 레이저 원격 용접기술은 레이저 빔을 용접부의 원거리에서 조사하여 용접하는 기술로서 레이저의 초점거리와 갈바노미터의 고속 이송를 이용한 최첨단 용접공정이다. 높은 생산성을 유지 하기 위하여 정확한 용접 컨트롤이 필요하지만, 레이저 용접의 경우 용접시 안전 문제로 육안으로 관찰하기가 힘들다. 이러한 문제를 해결하기 위하여 모니터링이 필수적이다. 기존의 레이저 모니터링으로는 음향 센서를 이용하여 음향을 측정하는 방법이나 UV 센서, IR 센서 등의 빛을 이용한 방법이 많이 사용되어왔다. 하지만 이 방법들은 간접적인 방법들로 노이즈에 민감하고 또 설치가 까다로운 단점이 있었다. 본 연구에서는 CCD 카메라를 이용하여 시스템의 복잡함을 줄이고 더 정확하고 빠르게 용접 현상을 관찰하기 위하여 동축 모니터링 시스템을 이용하였으며, 이를 통해 Keyhole을 관찰하고 센서를 이용한 용접 변수(레이저 출력, 용접 속도 등)의 변화에 따른 용접 현상을 규명하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1491-1496
• /
• 2009

This paper presents an digital based input/output interface circuit for controlling and monitoring the Diesel Engine Generator for emergency. In order to monitor and control of the Emergency Diesel Engine Generator, controlling and monitoring circuits need 5 analog input channels, 2 pick-up coil measuring circuits, 10 digital input channels containing Broken Wire Detect function, and 7 relay control signal output channels. This system performs signal processing of input signal taking advantage of simple filter circuit, photo-coupler and comparator circuit at analog input parts, and output signals for main relay is designed acting by double control, so it prevents malfunction completely. And it improves accuracy of speed input signal by applying digital circuit that processes rick-up coil signal.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.189-197
• /
• 2009

As the web service technology matures. research is focused on the composite web services that combine individual web services within an enterprise or between enterprises. Quality of service is the critical competitiveness factor in this mature technology stage where there are many services with similar functionalities differing only in some non-functional properties. Monitoring is the key component for the service quality management of a web service. A service quality monitoring system design using a broker is presented in this paper. OWL-S is used to specify the composite service process and a service policy (inputs and outputs of each service, quality attributes and values, etc.) built by WS-Policy is applied to the composite service process. If there is any discrepancy between the service policy and the monitored data, the service provider and the user are notified of it so as to take necessary measures. We have implemented a travel reservation system as an example of the presented design and the experimental results are shown. Average response time was monitored and the timeout policy was applied in the experiment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.567-569
• /
• 2016

In this paper, utilizing an open-source platform, Arduino to display sensor data that get from temperature and humidity sensor in serial monitor, It communicates via bluetooth module so that we have developed that to monitor temperature and humidity data on Android smartphone. Using developed system, it can monitor temperature and humidity in field anytime and any categories which need above system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.722-728
• /
• 2015

The demand for shipboard energy management is expected to gradually increase based on ship energy efficiency management plans (SEEMPs), which have been in use since January 1, 2013. Therefore, the fuel consumption of the main engine, which occupies the greatest portion of the energy used, along with elements related to the engine power, should be strictly monitored. There are many different methods for indicating the engine power. However, this study performed an experiment to monitor the status of a ship's engine power in real time using an encoder and a proximate switch, which are economical to purchase and easy to install. In the experiment, the angular velocity during one cycle of a two-stroke low-speed engine was measured, and the measured data were converted to the torque fluctuation. The angular velocity during an abnormal firing condition in the cylinder was also measured, and the torque fluctuation as a result of a misfire was considered. The results were compared with sea trial data to determine the reliability. In this study, the status of the engine power was determined using the torque fluctuation of the main engine in an operating ship.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3628-3633
• /
• 2012

This paper proposes a model of the real time monitoring system based on Ubiquitous Sensor Network (USN) for the detection and prediction of landslides. For this purpose, the real time monitoring system with tilting sensor and USN was set up and the performance was conducted. The performance was accomplished by conducting both field examinations and the experimental evaluation of the monitoring system. The results of this study show that the angle $0^{\circ}$, $-10^{\circ}$, $-20^{\circ}$ and $0{\sim}-30^{\circ}$ of sensor position detected by the sensor module coincide with the data measured from USN monitoring system by giving a sampling time 100[msec]. Consequently, the proposed model of the real time monitoring system with tilting sensor based on USN will be widely used as a monitoring system in the exposure to dangerous landslide regions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1949-1954
• /
• 2016

Smart grid technology can be called grid techniques to improve the efficiency of the electric power by exchanging bidirectional information of electric power with real-time between electric power suppliers and consumers. Recently, the solar power generation system is being applied actively. However the solar power system has several problems leading to reduce overall electricity generation, because the difficult of the diagnosis and the solar power system failure such as PV(PhotoVoltaics) and inverter. In order to build an efficient smart grid, a stable electric power energy requirements capture and management and early fault detection is essentially required in solar power generation system. In this paper, it is designed to monitor the operating status of the solar power monitoring system from a remote location through a RS-485 or TCP/IP communication module to monitoring the output of solar power energy and abnormal phenomenon, to developing the measurement module and to transfer measured data.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.509-518
• /
• 2005

The RMS(Remote Monitoring System) is generalized to adopt in many automatic system by progress of industrial and technical growth. RMS has been developed from simple status monitoring system to realtime control system with multimedia interface. This study is to design and develop monitoring system that client is able to monitor and control target system on web browser. The RMS is consist of 4 functional modes, which is monitoring mode, control mode, setup mode and video mode. Monitoring mode is to observe remote target system with realtime on web browser. Control mode is to change target system status in monitoring mode. Setup mode is to change system variable in control mode. Video mode is to monitor target system environment visually by web camera. This RMS is easy to access and manage target system, and so useful to monitor remote automatic system and closing site.