• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.49-58
• /
• 2013

Eight small scale circular reinforced concrete columns were tested under cyclic lateral load with constant axial load. Test specimens were designed with 4.5 aspect ratio. The selected test variables are longitudinal steel ratio, transverse steel ratio, yielding strength of longitudinal steel and axial load ratio. The test results of columns with different longitudinal steel ratio, transverse steel ratio and axial load ratio showed different seismic performance such as equivalent damping ratio, residual displacement and effective stiffness. It was found that the column with low strength of longitudinal steel showed significantly reduced seismic performance, especially for equivalent damping ratio and residual displacement. The regulation of flexural over-strength is adopted by Korea Bridge Design Specifications (Limited state design, 2012). The test results are compared with nominal strength, result of nonlinear moment-curvature analysis and the design specifications such as AASHTO LRFD and Korea Bridge Design Specifications (Limited state design).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.131-137
• /
• 2005

The purpose of this paper is to evaluate the axial magnetic flux measurement could be used as a tool of the condition monitoring system for the induction motor and to develope the diagnostic algerian for the electric motors. The magnetic leakage flux signal is captured by the flux coil located at the end of motor without the disturbance of the operation. And the signal is analyzed both time and frequency bases to detect the failure of the motor. Specific signature can be described in time and frequency domain for each faults of the motor. The spectrum of the signal was found more useful for the monitoring purpose. The supply voltage imbalance and tin to turn failure of the stator winding could be detected by analysing the specific sidebands of the axial flux and sideband of the rotor bar pass frequency with the high resolution spectrum. The goal of this study verity that the axial flux measurement for the induction motor is a powerful tool for the diagnostic method and develope the algorithm to detect the fault.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.19-27
• /
• 2002

최근 경제구조가 고도화되고 생활수준이 향상됨에 따라 사회간접자본시설 및 각종 용도의 건축물에 대한 요구가 높으며, 특히 고층건물 건축시에 사용되는 리프트카의 수요 또한 증가되고 있다. 일반적으로 기계구조물은 사용기간동안 절대적 안전성을 확보하기 위하여 설계되고 있으나 실제 건설 현장에서 사용중인 피니언축에 균열이 발견되고 있으며 이로 인하여 피니언축 수리보수 기간동안의 공사중지로 공기지연 뿐만 아니라 리프트카 추락으로 인한 인명사고가 발생하는 등 그 위험성이 매우 높다. 이에 따라 각종 구조물, 설비 및 기기의 안전진단을 통한 유지보수가 중요시되고, 결함 검출의 정량화에 대한 연구, 기술 개발이 강력히 요구되고 있다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.768-772
• /
• 1994

공작기계의 주축은 최근 고속화,고정밀화 및 고강성화되어가는 경향이 커지고 있다. 이러한 경향에 따라서 주축의] 설계는 매우 중요하며, 주축용 베어링은 앵귤러 콘택트 볼베어링이 많이 사용되고 있다. 공작기계의 주축은 고속 회전에 따른 고강성의 필요성이 증대하게 되고, 고상성을 얻기 위하여 축 방향의 일정한 예압을 주게된다. 이 예압량은 결국 축 방향의 하중이므로 주축용 베어링의 수명을 변화 시키게 된다. 따라서 축 방향 하중의 변화에 따른 베어링의 수명 특성을 파악하여야 하며, 적절한 베어링 수명의 판단을 통해 기계의 보수 및 관리에 관한 재경비를 절감할 수 있다. 그러므로 본 연구에서는 실험을 통해 베어링의 특성 주파수를 이끌어 내고 주파수 스펙트럼 분석을 이용하여 베어링의 상태를 진단하 는 기본겆인 데이터를 얻는다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.209-212
• /
• 2006

In this study, Support Vector Machine(SVM) and Artificial Neural Network(ANN) are used for developing the defect diagnostic algorithm of the aircraft turbo-shaft engine. Effect of altitude variation on the Defect Diagnostics algorithm has been included and evaluated. Separate learning Algorithm(SLA) suggested with ANN to loam the performance data selectively after classifying the position of defects by SVM improves the classification speed and accuracy.

• Journal of Life Science
• /
• v.30 no.3
• /
• pp.313-319
• /
• 2020

Recently, cattle epidemic diseases are caused by a pathogen such as a virus or bacterium. Such diseases can spread through various pathways, such as feed intake, respiration, and contact between livestock. Diagnosis based on the ELISA (Enzyme-linked immunosorbent assay) and PCR (Polymerase chain reaction) methods has limitations because these traditional diagnostic methods are time consuming assays that require multiple steps and dedicated equipment. In this review, we propose the use of the CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) Cas system based on DNA and RNA levels for early point-of-care diagnosis in cattle. In the CRISPR/Cas system, Cas effectors are classified into two classes and six subtypes. The Cas effectors included in class 2 are typically Cas9 in type II, Cas12 in type V (Cas12a and Cas12b) and Cas13 in type VI (Cas13a and Cas13b). The CRISPR/Cas system uses reporter molecules that are attached to the ssDNA strands. When the Cas enzyme cuts the ssDNA, these reporters either fluoresce or change color, indicating the presence of a specific disease marker. There are several steps in the development of a CRISPR/Cas system. The first is to select the Cas enzyme depending on DNA or RNA from pathogens (viruses or bacteria). Based on that, the next step is to integrate the optimal amplification, transducing method, and signal reporter. The CRISPR/Cas system is a powerful diagnostic tool using a gene-editing method, which is faster, better, and cheaper than traditional methods. This system could be used for early diagnosis of epidemic cattle diseases and help to control their spread.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.66-71
• /
• 1998

High spatial resolution ultrasonic imaging is necessary in several fields of investigation, in order to permit greater precision of clinical diagnosis in the dermatology, ophthalmology etc. We present a B-mode scan system using sector scanning probe of 20MHz center frequency. This developed system allow the high resolution image of 250${\mu}m$ in lateral and 80${\mu}m$ in axial, which of display the size of a $5mm {\times} 5mm$ image with 20 frames/sec. We have shown the images of various structural elements of the human skin and of the nail. We have compared the skin images obtained for each of the different age and we have shown in a general with the age, the atrophy of the skin thickness and the appearance of the abnormal hypoechogene band under epidermis (named SENEB : Sub Epidermal Non Echogene Band).

• KOREAN POULTRY JOURNAL
• /
• v.46 no.3
• /
• pp.102-105
• /
• 2014

고병원성 조류인플루엔자(HPAI, 이하 AI)는 '03/'04년을 시작으로 '06/'07년과 '08년, '10/'11년 이후 그 해 9월 고병원성 AI 청정국 지위를 회복했지만, 금년 1월 16일 첫 의심축 신고를 시작으로 또 다시 발생되면서 국내 5차례가 발생되었다. 다음은 '14.1.16일부터 현재('14.2.19일)까지 AI 발생 현황과 발병 원인에 대한 내용을 정리했다.

• Monthly Korean Chicken
• /
• v.3 no.11 s.29
• /
• pp.2-8
• /
• 1997

2004년까지 축산물위생수준 선진국수준으로 - 축기연, 생명과학관 준공으로 경쟁력 향상에 기여 - 축산 폐수처리 시행규칙 개정 - 닭 전염성 빈혈 조기 진단법 개발 - 타조 검역기간 오래 걸려 - 미육류검사, 기준강화 불구 소규모 도축장 관리 여려워 - 96년 닭고기 1인당 연간 소비량 11.2Kg - 중국, 미 가금육 수입금지 철회 - 세계 가금육 생산 및 소비 꾸준히 증가 추세 - 빠르게 성장하는 인도의 양계산업

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.43-48
• /
• 2015

In this study, a method to enhance the dynamic range of seismic sensor is proposed. The low frequency noise included in the measurement of seismic sensor is modelled as an ARMA(Auto Regressive Moving Average) model and the order and parameters of the model are identified through system identification method. The identified noise model is augmented into Kalmman filter which estimate seismic signal from sensor measurement. The proposed method is applied to a newly developed seismic sensor which is MEMS based 3-axis accelerometer type. The experiment show that the proposed method can enhance the dynamic range compared to the simple low pass filtering.