• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.315-321
• /
• 2004

To compare soil carbon contents by Tyurin method and dry combustion method, we carried out analysis for 212 samples of agricultural land in Korea. The average values of soil carbon contents analyzed by Tyurin method and dry combustion method were $17.47{\pm}10.80$ and $19.91{\pm}10.63g\;kg^{-1}$, respectively. Both methods were evaluated as acceptable methods for soil carbon contents as the results showed. The results showed that soil texture had little effect on analysis method of carbon contents. Highly significant linear regression equation, Y = 0.846X ($R^2=0.991$), was obtained between carbon contents analyzed by Tyurin method (Y) and dry combustion method (X). As a result of comparison with data of carbon contents of the two methods, about 69% of results at dry combustion method have exceeded to results at Tyurin method. Especially, differences between results at two methods became higher as carbon contents were increasing. Tyurin method has been advantages such as shorter analysis time for one sample, more recognition for carbon analysis, and no need for expensive analyzer, while dry combustion method has simpler procedure, no heavy metal wastes, and more samples for analysis at one time.

• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.77-85
• /
• 2001

Concrete filled steel tubular (CFT) columns are becoming popular in structural applications. The increased popularity comes from their excellent structural properties such as high strength, high ductility, and large energy absorption capacity. However, the disadvantage feature of CFT column is the difficulty in predicting its time dependant characteristic (i.e., creep and shrinkage) of inner concrete. The time dependent behavior of CFT column can cause serious serviceability problems. Therefore, it is necessary to investigate the long term behavior of CFT column. This paper presents analytical and experimental studies on long-term behavior of CFT-column under a central axial loading. Two loading cases are considered in the research; (1) the load applied only at the inner core concrete of CFT-column and (2) the load applied simultaneously on both concrete and steel tube. Analysis method using the bond strength model is proposed and conclusions on long-term properties of CFT-column can be derived from the results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.432-436
• /
• 2007

본 연구의 목적은 3차원 풍력터빈 블레이드 최적형상설계를 위한 실용적이고 효율적인 설계 과정을 구현하는 것이다. 국내 연안의 해상풍력에 적용하기 위해서 통계적 모델을 이용하여 풍황 자료를 분석하였다. 설계에 관련된 많은 수의 설계변수를 효과적으로 관리하기 위해서 설계과정은 운용조건 최적화와 블레이드 형상설계의 2단계로 구성하였다. 실험계획법에 의해 추출된 각 운용조건점은 형상설계를 위한 입력값으로 제공된다. 형상설계 단계에서는 최소에너지손실 조건과 결합된 BEMT를 이용하여 각 블레이드 단면에서의 시위길이와 피치각 분포를 최적화하였다. 블레이드 단면 익형은 NREL S830을 이용하였고, 익형의 공력성능은 XFOIL을 이용하여 예측하였다. 설계된 블레이드 형상의 성능해석을 수행하고 그 결과를 바탕으로 반응면을 구성하였다. 좀 더 나은 성능을 가진 블레이드 형상을 찾기 위해서 초기설계공간에서 확률적 방법을 이용하여 타당성 있는 설계공간까지 운용조건 설계변수를 이동시키고 구배최적화 기법을 통해 각각의 제약함수를 만족하면서 연평균발생에너지를 최대로 하는 최적블레이드 형상을 구현하였다. 제시된 최적설계과정은 풍력터빈블레이드 개발에 실용적이고 신뢰성 있는 설계툴로서 사용이 가능하다.

• New & Renewable Energy
• /
• v.3 no.3
• /
• pp.63-71
• /
• 2007

본 연구의 목적은 3차원 풍력터빈 블레이드 최적형상설계를 위한 실용적이고 효율적인 설계과정을 구현하는 것이다. 국내 연안의 해상풍력에 적용하기 위해서 통계적 모델을 이용하여 풍황자료를 분석하였다. 설계에 관련된 많은 수의 설계변수를 효과적으로 관리하기 위해서 설계과정은 운용조건 최적화와 블레이드 형상설계의 2단계로 구성하였다. 실험계획법에 의해 추출된 각 운용조건 설계점은 형상설계를 위한 입력 값으로 제공된다. 형상설계 단계에서는 최소에너지손실 조건과 결합된 BEMT를 이용하여 각 블레이드 단면에서의 시위길이와 피치각 분포를 최적화하였다. 블레이드 단면 익형은 NREL S830을 이용하였고, 익형의 공력성능은 XFOIL을 이용하여 예측하였다. 설계된 블레이드 형상의 성능해석을 수행하고 그 결과를 바탕으로 반응면을 구성하였다. 좀 더 나은 성능을 가진 블레이드 형상을 찾기 위해서 초기설계공간에서 확률적 방법을 이용하여 타당성 있는 설계공간까지 운용조건 설계변수를 이동시키고 구배최적화 기법을 통해 각각의 제약함수를 만족하면서 연간에너지생산량을 최대로 하는 최적블레이드 형상을 구현하였다. 제시된 최적설계과정은 풍력터빈블레이드 개발에 실용적이고 신뢰성 있는 설계툴로서 사용이 가능하다.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.25-32
• /
• 2014

The main objective of materials testing is to simulate in-situ field conditions as closely as possible, including loading conditions, climatic conditions, etc. Also, the test method should be easy, inexpensive, simple, and efficient to conduct to become an acceptable standard laboratory testing method for many agencies. Based on these reasons, a new test method employing repetitive axial loading with confinement was developed to evaluate the rutting(permanent deformation) of asphalt concrete. The new laboratory test protocol was developed based on the study of the various structural analysis and field data. This protocol divides asphalt layer(s) into three categories depending upon the depth. Different temperatures and vertical stress levels were used in these areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.947-954
• /
• 2016

A simplified analysis method is first proposed in order to determine an optimized initial shape of cable-stayed bridges including all unstrained element lengths without using complicated nonlinear FE analysis. The unstrained-length based FE method is then presented using the unstrained lengths by the simplified analysis. To demonstrate validity and accuracy of the proposed method, Incheon bridge model having the fabrication camber is constructed and initial shaping analysis is performed using the presented method and commercial finite element analysis program, MIDAS. Resultantly it is shown that the initial solutions by the proposed algorithm are well optimized and in good agreement with those by MIDAS except for axial displacements of the main member.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.251-256
• /
• 2007

FY-2C 위성은 2004년 10월 발사되어 동경 105도 에 서 운영 중인 중국의 정지 궤도 기상위성 이며 관측 영상은 한반도 지역을 포함하고 있다. 현재 FY-2C S-VISSR2.0[l]에 대한 Navigation 알고리즘이 공개되어 있지 않으며，Navigation을 위하여 S-VISSR2.0에 포함되어 있는 Simplified Mapping Block 정보를 사용하여야 한다. Simplified Mapping Block은 5도 간격의 정보만을 제 공하므로 관측 지 역 의 모든 좌표에 대한 Navigation 정보를 얻기 위해서는 보간볍을 사용하여야 한다. 그러나 보간법은 기준 점에서 멀어질수록 오차가 크게 나타날 수 있다. 따라서 본 논문에서는 모든 좌표에 대한 Navigation 정보를 얻을 수 있는 MTSAT Image Navigation 알고리즘을 FY-2C S-VISSR2.0에 적용하여 Simplified Mapping Block과의 차이를 분석하였다. 분석 방법은 Simplified Mapping Block과 MTSAT Image Navigation[2] 알고리즘을 5도 간격의 격자 점(위경도)에서 Column 및 Line 값 비교， Geo-location된 영상의 품질 비교，WDB2 Map Data의 Coast Line과의 비교를 수행하였다. 분석 결과 격자 점에서의 Column, Line 값은 0.5 이내의 차이 값을 나타내었다. 그리고 Geo-location된 영상 비교에서는 격자 점 주변에서 영상의 차이가 없으나 격자 점에서 멸어질수록 영상의 품질은 MTSAT Image Navigation 알고리즘으로 생성한 영상이 더 우수하였다. WDB2 Map Data의 Coast Line과의 비교에서 오차는 동일하게 발생하였으며，영상의 Column 축에 대한 오차는 평균 1.847 Pixel, 최대 6 Pixel, 최소 oPixel 이며， Line 축에 대한 오차는 평균 0.135 Pixel, 최대 4 Pixel, 최소 0 Pixel을 나타내었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.329-335
• /
• 2018

Satellite images, which are widely used in various applications, are very useful for monitoring the surface of the earth. Since satellite data is obtained from a remote sensor, it contains a lot of noise and errors depending on observation weather conditions during data acquisition and sensor malfunction status. Since the accuracy of the data affects the accuracy and reliability of the data analysis results, noise removal and data restoration for high quality data is important. In this study, we propose a reconstruction system that models the time dependent dynamic characteristics of satellite data using a multi-period harmonic model and performs adaptive data restoration considering the spatial correlation of data. The proposed method is a real-time restoration method and thus can be employed as a preprocessing algorithm for real-time reconstruction of satellite data. The proposed method was evaluated with both simulated data and MODIS NDVI data for six years from 2011 to 2016. Experimental results show that the proposed method has the potentiality for reconstructing high quality satellite data.

• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.409-417
• /
• 1999

Talairach atlas consists of three orthogonal sets of coronal, sagittal, and axial slices. This atlas has recently an important role as a standard brain atlas in diagnosing disease related with brain function and analyzing cause of brain disease. The 3D digital volume data set reconstructed from the atlas is widely applied to visualization and quantitative analysis of results processed in the digital computer. This paper represented application method of bi-linear interpolation technique, proposed tri-planar interpolation algorithm for 3D volume data reconstruction of Talairach atlas. And we implemented Talairach atlas editor and discussed problems in volume reconstruction of Talairach atlas. The bi-linear method was applied to only one set of the slices and considered the on intensity value in the interpolation process. The tri-planar technique concurrently uses three orthogonal sets of slices with the same information of brain structures. Talairach atlas editor visualized three sets. of atlas slices on the same coordinate and had editing function. Using the atlas editor, we represented problems in volume reconstruction by showing inconsistency of brain structures among three sets of atlas slices.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.351-356
• /
• 2007

The crystal structure of $Li(ND_4)SO_4$ was analyzed by X-ray and neutron diffraction methods. The crystal is a deuterated $Li(NH_4)SO_4$ and one of the ferroelectric materials with hydrogen atoms. The crystal is orthorhombic at room temperature, $P2_1nb$, with lattice parameters of $a=5.2773(5)\;{\AA},\;b=9.1244(23)\;{\AA},\;c=8.7719(11)\;{\AA}$ and Z=4. Neutron intensity data were collected on the Four-Circle diffractometer (FCD) at HANARO in Korea Atomic Energy Research Institute and X-ray date were given by Prof. Y. Noda of Tohoku University Japan. The structure was refined by full-matrix least-square to final R value of 0.070 for 1450 observed reflections by X-ray diffraction and to final R=0.049 for 745 observed reflections by neutron diffraction. With X-ray data we obtained only one hydrogen atomic position. However, not only all atomic positions of four hydrogen atoms at $NH_4$ but also the occupation factors of D and H were refined with neutron data. From this results we obtained the average chemical structure of this sample, $LiND_{3.05}H_{0.95}SO_4$.