• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.335-344
• /
• 2010

This paper presents both of an investigation on the ultimate responses and a verification study on the structural methodology using beam-truss element of steel transmission towers using experimental study. The partially scaled tower which verified with analytical model was fabricated and the horizontal load was applied up to failure in the laboratory. The structural methodology for finite element analyses was verified against experimental results and both the ultimate load capacity and collapse mechanism were shown in the test to give sufficiently accurate results with those of analytical study. It was shown as well that the ultimate failure is primarily attributed to instability of the main posts in the leg parts.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2011

Wave overtopping reef system with guide vanes convert incident wave energy on the reef type structures into electric power. Previous studies decided shape parameters likes slope, height of the sloping arm and shape of guide vane. In this paper, using these shape parameters produce 1/7 scale model and construct integration scale model system combining water pressure head turbine, power generation, power control, operating control and monitoring system. In these systems, we measure the overtopping and power generation with different wave heights and periods and compare the results with the previous studies. This was confirmed designed overtopping and power generation, then we suggest efficient control system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.24-33
• /
• 2017

Domestic urban railway underground station structures, which were built in the 1970s ad 1980s, had been constructed as Cut-and-Cover construction system without seismic design. Because the trends of earthquake occurrence is constantly increasing all over the world as well as the Korean Peninsula, massive human casualties and severe properties and structures damage might be occurred in an non-retrofitted underground station during an earthquake above a certain scale. Therefore, to evaluate the retrofit effect and soil-structure interaction of seismic retrofitted underground station, a centrifugal shaking table test with enhanced stiffness on its structural main member are carried out on 1/60 scaled model using the Kobe and Northridge earthquakes. The seismic retrofitted members, which are columns, side walls, and slabs, are evaluated to comparing with existing non-retrofitted centrifuge test results Also, to simulate the scaled ground using variation of shear velocity according to site conditions such as ground depth and density, resonant column test is performed. From the test results, the relative displacement behavior between ground and structures shows comparatively similar in ground, but is increased on ground surface. The seismic retrofit effects were measured using relative displacements and moment behavior of column and side walls rather than slabs. Additionally, earthquake wave can be used to main design factor due to large structural deformation on Kobe earthquake wave than Norhridge earthquake wave.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.377-386
• /
• 2003

The proposed simplified MDOF model is applied to a half-scale single-story reinforced masonry test building with a single diagonally-sheathed diaphragm. Comparisons of analytical studies to experimental tests can be valuable for understanding the seismic response of these types of buildings and for determining the qualities and limitations of the simplified models. A model calibration process is performed in this paper to determine the required structural properties based on the elastic and inelastic test responses for test building. This approach is necessary since established methods to determine the in-plane and out-of-plane stiffness, strength, and hysteresis do not exist.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.2
• /
• pp.19-28
• /
• 2005

This paper presents a laboratory investigation on the failure mechanism of geosynthetic reinforced slopes using 1/5-scale reduced model. The components of the model were selected with due consideration of the similitude law and the step-by-step actual wall construction procedure was closely simulated. The model tests successfully replicated the failure mechanism with relative density, slope and vertical spacing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.19-26
• /
• 2024

In this study, the compressive behavior of a 1/12.5 scale model of a wind tower support structure connection was experimentally analyzed. A high-performance cementitious grout with a compressive strength of 140 MPa was used to fill the connection, and experiments were conducted with shear key spacing, the shape, and connection length as variables. When the number of shear keys in the connection is the same, the smaller the spacing of the shear keys than the length of the connection, the higher the shear strength, and for the same spacing and connection length, the higher the height of the shear keys, the higher the strength. In addition, it was found that the strength showed a linear behaviour until the connection slip reached 1.0 mm, and it reached the maximum strength at 7.0 mm connection slip showing a non-linear behaviour as the load increased. It was found that the failure mode changed from interfacial shear failure to grout failure as the strength increased according to the shape and spacing of the shear key, and brittle failure did not occur due to steel fibers.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.96-106
• /
• 2014

The increased vibration level of the railway bridge could make significant noise and, also, cause structural damages such as fatigue cracks. Related to these subjects, a spherical elastomeric bridge bearing, which is layered by hemispherical rubber and steel plates, was investigated in terms of its vibration performance. Several different shape factors could be considered by changing the curvature of hemispherical surface and size in rubber and steel plate thicknesses in the manufacturing stage. The performance of the spherical elastomeric bearing for the reduction in vibration was compared with that of the conventional bearing by performing vibration experiments on a scale-downed model. The rubber material characteristics and spherical shape are found to be important parameters in reducing the bridge vibration.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.2
• /
• pp.107-116
• /
• 2012

The experiment was performed to analyze the intersectional ventilation efficiency by intersection structure and Jet Fan in network-form road tunnel. For this, the size of real road tunnel was reduced by 1/45. To apply traffic inertia force when driving, blower fan was used to form an airflow in model tunnel and the intersectional efficiency was also investigated by measuring the speed at local point of the tunnel. To improve the reduction of ventilation caused by the structure character, Jet Fan was installed to optimize ventilation efficiency in tunnel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.367-367
• /
• 2015

토석류는 바위, 자갈, 토사 등이 물과 혼합하여 흐르는 재해 현상이다. 근래에 이슈가 되었던 우면산 토석류사태, 춘천시 펜션 토석류재해로 인한 피해로 토석류에 대한 국민적 관심이 높아지게 되었다. 토석류의 피해를 저감하기 위한 대표적 시설로는 사방댐, 링네트, 브레이커시스템 등의 다양한 저감시설이 있다. 2000년 이후 국내에는 사방댐 형태의 토석류 유출저감시설의 설치가 매년 증가하고 있다. 그러나 대부분의 사방시설은 표준화된 설계기준에 의해 시공되기 보다는 단순한 검토만을 통해 시공되고 있어 관리적인 측면에서 문제점이 대두되고 있다. 또한 대부분 구조적인 안정성 검토는 이루어지고 있으나 수리적인 특성을 고려한 검토는 미흡한 실정이다. 따라서 본 연구에서는 수리 실험 연구를 진행하기 위한 실험계획을 수립하고, 수리실험에 사용할 토석류 유출 저감시설 축소모형을 제작하였다. 모형의 제작 방법으로는 최근 다양한 분야에 활용되며, 널리 보급 되고 있는 3D프린터를 이용하였다. 3D프린터는 레이어를 한 장씩 쌓는 과정으로 제작되어 정밀하고 세밀한 모형물을 제작할 수 있다. 이러한 특성을 활용하여 기존에 단순화 시켜 제작되던 모형을 실제와 거의 동일한 형태로 제작하였다. 본 연구에서는 3D 프린터로 제작된 실험용 모형을 이용하여 토석류 유출저감시설의 토석류 저감효과 분석을 위한 기초 수리실험을 수행하였다.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.11-18
• /
• 2007

Seismic performance evaluation for dam safety evaluation has been continually conducted. However the behavior analysis for the spillway pier which is known as the weak point of dam is seldom reported. Therefore, this study performed the static loading tests for a prototype structures as elementary tests for the final seismic performance evaluation of dam safety. The prototype of pier structure has 1/20 scale and it adopts to strength model. And cracking loads and ultimate loads of real structures are calculated through numerical analysis using commercial FEM program (ABAQUS). The results of this study show some difference between the results of prototype tests and the results of numerical analysis. Also, the ultimate and cracking loads can be estimated through the prototype loading test and numerical analysis.