• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.124-130
• /
• 2007

Lettuce (Lactuca Sativa L.) is the most popular salad vegetable crop The purpose of this study was to analyze the quality of lettuce, and residual pesticides in this vegetable, during growth after transplanting. The eatable weight was 40% of the total weight at the commencement of transplanting, but had doubted at harvest after transplanting. As lettuce grew after transplanting, the pH, the sugar level, and the moisture content increased slightly, and the color tended towards yellow rather than greenThe SPDA chlorophyll measurement was 16.84 at 42 day post-ransplantation, and increased to 26.44 at 67 day after transplanting. The contents of vitamin C were 2.5mg/100g wet weight at 60 d after transplantation, but decreased to 2.2mg/100g wet weight 67 day post-transplantation. Mineral (Ca, Fe, K, Mg, and Na) levels rose after transplantation, and attained their highest levels 60 day post-transplantation. The lettuce crop was analyzed for residues of each of 48 pesticides nt 54 after transplantation, and the only such chemical detected was chlorthalonil(0.03 0.25mg/kg wet weight).

• KOREAN POULTRY JOURNAL
• /
• s.123
• /
• pp.111-114
• /
• 1980

• Communications for Statistical Applications and Methods
• /
• v.17 no.4
• /
• pp.515-525
• /
• 2010

We investigated design-based properties of the ordinary least square estimator(OLSE) and the weighted least square estimator(WLSE) in a panel regression model. Given a complex data we derive the magnitude of the design-based bias of two estimators and show that the bias of WLSE is smaller than that of OLSE. We also conducted a simulation study using Korean welfare panel data in order to compare design-based properties of two estimators numerically. In the study we found the followings. First, the relative bias of OLSE is nearly two times larger than that of WLSE and the bias ratio of OLSE is greater than that of WLSE. Also the relative bias of OLSE remains steady but that of WLSE becomes smaller as the sample size increases. Next, both the variance and mean square error(MSE) of two estimators decrease when the sample size increases. Also there is a tendency that the proportion of squared bias in MSE of OLSE increases as the sample size increase, but that of WLSE decreases. Finally, the variance of OLSE is smaller than that of WLSE in almost all cases and the MSE of OLSE is smaller in many cases. However, the number of cases of larger MSE of OLSE increases when the sample size increases.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.189-196
• /
• 2003

In this study, the vertical opening of the non-float midwater pair trawl net was maintained by controlling the length of upper warp. This was because the head rope was able to be kept linearly and the working depth was not nearly as changed with the variation of flow speed as former experiments in this series of studies have demonstrated. We confirmed that the opening efficiency of the non-float midwater pair trawl net was able to be developed according to the increase in front weight and wing-end weight. In this study, we described the opening efficiency of the non-float midwater pair trawl net according to the variation of front weight and wing-end weight obtained by model experiment in circulation water channel. We compared the opening efficiency of the proto type with that of the non-float type. The results obtained can be summarized as follows：1. The hydrodynamic resistance was almost increased linearly in proportion to the flow speed and was increased in accordance with the increase in front weight and wing-end weight. The increasing rate of hydrodynamic resistance was displayed as an increasing tendency in accordance with the increase in flow speed. 2. The net height of the non-float type was almost decreased linearly in accordance with the increase in flow speed. As the reduced rate of the net height of the non-float type was smaller than that of the net height of the proto type against increase of flow speed, the net height of the non-float type was bigger than that of the proto type over 4.0 knot. The net width of the non-float type was about 10 m bigger than that of the proto type and the change rate of net width varied by no more than 2 m according to the variation of the front weight and wing-end weight. 3. The mouth area of the non-float type was maximized at 1.75 ton of the front weight and 1.11 ton of the wing-end weight, and was smaller than that of the proto type at 2.0∼3.0 knot, but was bigger than that of the proto type at 4.0∼5.0 knot. 4. The filtering volume was maximized at 3.0 knot in the proto type and at 4.0 knot in the non-float type. The optimal front weight was 1.40 ton.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.106-107
• /
• 2016

Rolling motion of floating body might upset the body, make crews and passengers exhausted and/or apply forces to the structure to cause damage. Therefore for almost ships bilge keels are equipped, in special case fin stabilizer or gyroscope may be installed. This paper suggests the Anti-rolling pendulum to reduce roll motion to act the similar role with anti-rolling tank. The device suggested has more effective than the anti-rolling tank with 1/6 volume of the tank.

• Survey Research
• /
• v.5 no.2
• /
• pp.49-70
• /
• 2004

This paper is a broad review about general regression estimators, which are very useful when auxiliary variables are available in survey sampling. We investigate the process of development of general regression estimators from birth to suggestion of variance estimation method and examine some properties of general regression estimators by comparing with calibration and QR estimators. We also present some forms of general regression estimators available under complex sampling designs such as stratified sampling and cluster sampling. Finally, we comment some advantages as well as disadvantages of general regression estimators and theoretical and practical development in the future.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.575-578
• /
• 2003

SPIHT algorithm is a wavelet based fast and effective technique for image compression. It uses a list structure to store status information which is generated during set-partitioning of zero-tree. Usually, this requires lots of additional memory depending on how high the bit-rate is. Therefore, in this paper, we propose a new technique called MZP-DFS, which needs no additional memory when running SPIHT algorithm. It traverses a spatial-tree according to DFS and eliminates additional memory as it uses test-functions for encoding and LSB bits of coefficients for decoding respectively. This method yields nearly the same performance as SPIHT. This may be desirable in hardware implementation because no additional memory is required. Moreover. it exploits parallelism to process each spatial-tree that it can be applied well in real-time image compression.

• Annual Conference on Human and Language Technology
• /
• 2019.10a
• /
• pp.415-418
• /
• 2019

기계독해 모델에 새로운 도메인을 적용하기 위해서는 도메인에 맞는 데이터가 필요하다. 그러나 추가 데이터 구축은 많은 비용이 발생한다. 사람이 직접 구축한 데이터 없이 적용하기 위해서는 자동 추가 데이터 확보, 도메인 적응의 문제를 해결해야한다. 추가 데이터 확보의 경우 번역, 질의 생성의 방법으로 연구가 진행되었다. 그러나 도메인 적응을 위해서는 새로운 정답 유형에 대한 질의가 필요하며 이를 위해서는 정답 후보 추출, 추출된 정답 후보로 질의를 생성해야한다. 본 논문에서는 이러한 문제를 해결하기 위해 듀얼 포인터 네트워크 기반 정답 후보 추출 모델로 정답 후보를 추출하고, 포인터 제너레이터 기반 질의 생성 모델로 새로운 데이터를 생성하는 방법을 제안한다. 실험 결과 추가 데이터 확보의 경우 KorQuAD, 경제, 금융 도메인의 데이터에서 모두 성능 향상을 보였으며, 도메인 적응 실험에서도 새로운 도메인의 문맥만을 이용해 데이터를 생성했을 때 기존 도메인과 다른 도메인에서 모두 기계독해 성능 향상을 보였다.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.422-430
• /
• 2010

The radiation property of a Tonpilz transducer is influenced by the structural variables of the transducer. In this study, with respect to a single mode Tonpilz transducer, the radiation patterns were calculated for different head mass geometries of the same effective radiation area. The shapes of the head mass analyzed were the most popular circular, regular triangular, square, regular hexagonal and regular octagonal types, and radiation pattern equations were derived for each of the head mass shapes. Based on the derived equations, radiation patterns in accordance with the shape and size of the head mass were calculated and the results were compared with each other. Validity of the calculation results were confirmed by means of finite element analysis.

• Proceedings of the Korean Statistical Society Conference
• /
• 2000.11a
• /
• pp.141-146
• /
• 2000

Shapiro와 Wilk(1972)는 위치모수와 척도모수가 미지인 경우 지수분포의 검정통계량을 제안하였다. 그것은 척도모수의 일반화 최소제곱추정량과 표본분산의 비로 구성되었다. 그러나 이 검정통계량은 일치성을 갖지 않는다. 본 논문에서는 척도모수의 두개의 점근유효추정량으로 구성된 통계량을 고려하고 이의 극한분포를 구하였다. 또한 두 개의 통계량의 검정력을 비교한 결과 제안된 통계량이 변동계수가 1보다 크거나 같은 분포에서 더 좋은 검정력을 가짐을 볼 수 있었다.