• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.426-426
• /
• 2018

제 4차 산업혁명의 시대를 맞아 ICT 융합 차세대 물관리 시스템 관련 기술이 핵심적인 역할을 수행하게 될 것으로 예상되며, 이와 함께 다국적 기업의 시장 진출로 인한 경쟁심화가 예상되고 있다. 한편, 인구증가, 도시성장, 산업발전 및 기후변화에 따른 물부족, 물 수요와 물 공급의 불균형, 수질오염 등은 점점 더 심각해질 것으로 예상되고 있다. 또한, 수자원 산업에서 대상시설의 안전하고 경제적인 운영 및 유지관리를 목적으로 하는 운전, 감시, 진단, 보수, 개선 및 이를 위한 의사결정지원 기술인 운영관리(O&M, Operation and Maintenance) 기술의 중요성이 지속적으로 증가하는 추세이다. 스마트워터그리드(SWG)는 ICT 융복합 첨단 수자원 관리기술로 기후변화에 의한 물 부족과 수자원 인프라 노후화로 인한 효율저하 등 물 문제 해결을 위한 차세대 플랫폼으로 주목받고 있으나, 아직까지 스마트워터그리드 시스템 구축을 위한 장치, 부품, 공정, 설계, 시공 기술 등 주로 요소기술 확보를 목적으로 연구되었으며, 시설의 운영 및 유지관리 연구는 거의 진행되지 않아 효율적인 현장적용이 어려운 실정이다. 본 연구에서는 스마트워터그리드 데모플랜트 시설을 대상으로 운영 유지관리 기술의 고도화 기본방향, 세부 핵심기술, 추진방법 등을 제시하고자 한다. 특히 스마트워터그리드의 핵심기술인 AMI 기반 수운영 시스템을 대상으로 IoT 기반의 고효율 저비용 물 공급 체계 고도화 및 지능형 통합 운영 플랫폼 구축, Hybrid형 다중수원 활용 이동식 물 생산 시스템에 대한 운전제어 자가진단 운영관리 유지보수기술 등 원격 무인 자동화 물 생산시설 기술 고도화 개발방안에 대하여 중점적으로 다루고자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.127-135
• /
• 2006

In the existing education using the globe. teaching contents are very simple and the relationship among learning units lacks a little bit because teaching materials are composed individually with the globe. Therefore, in this study, we developed the education glove system based on multimedia that is closely connected with teaching materials and the globe. This system is composed of the globe device and the learning software based on computer control. The globe device rotates itself on its axis as the solar center, and provides more efficient and visual education environment to students through the link between computer and the globe. The learning software provides the multimedia contents such as parallax, climate, culture, and education information about each country, and this software also can simulate the revolution of the earth around the sun. The globe device can be operated in off-line without the computer link. This system was developed by the industry cooperation and was displayed in the principal exhibitions. We have obtained positive results through the exhibitions and will promote the product in the future.

• Journal of Digital Policy
• /
• v.1 no.2
• /
• pp.1-8
• /
• 2022

In case of a dangerous situation, the roof, which serves as an emergency exit, must be open in case of fire according to the Fire Act. However, when the roof door is opened, it has become a place of various incidents and accidents such as illegal entry, crime, and suicide. As a result, it is a reality to close the roof door in terms of facility management to prevent crime, various incidents, and accidents. Accordingly, the government is pushing to legislate regulations on housing construction standards, etc. that mandate the installation of electronic automatic opening and closing devices on rooftop doors. Therefore, in this paper, an intelligent emergency door opening/closing device system is proposed. To this end, an intelligent emergency door opening and closing system was developed by linking wired and wireless access counting and AI image analysis. Finally, it is possible to build a wireless communication-based integrated management platform that provides remote control and history management in a centralized method of device status real-time monitoring and event alarm.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.685-693
• /
• 2011

In the era of energy climate, IGCC technology is one of the powerful solutions for the demands of new energy with low carbon green growth. The present study is conducted to investigate the combustion characteristics of syngas from the coal gasifier to predict problems when it is fed to the gas turbine. Through high and low combustion tests, we understood that hydrogen is the main reason of NOx emission but easily controled by injecting the dilution of nitrogen. CO emission of syngas was comparable with that of methane and pressure fluctuation of syngas was not significant. The data from this study will be used for the optimization of combustion in the Korea first IGCC plant in 2015.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.53-59
• /
• 2010

This research aims in finding a more optimal ejector size for evacuating engine exhaust gasses and 20% of the cell cooling air. The remaining 80% of cell cooling air pumped into the test chamber is separately exhausted from the test chamber via a discharge port fitted with flow control valves and vacuum pump. Unlike its predecessor this configuration utilizes a smaller capture area to improve pressure recovery. The modified ejector size has a diameter of 1100mm enough to evacuate 66kg/s jet engine exhaust in addition to about 20%, 24kg/s of the cell cooling air tapped from the sterling chamber. This configurations has an area ratio of the engine exit and ejector inlet of about 1.2. Simulation results of the proposed ejector configuration, indicates improved pressure recovery.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.140-147
• /
• 2017

This paper describes the design and implementation of previously developed PMU (Power Monitoring Unit) for LiPB (Lithium-ion Polymer Battery) that is electric propulsion used as unmanned aerial vehicle's power source. Improved PMU provides stable voltage and current to various sensors and elctric motors necessary during flight. Voltage and current monitoring function that is measured by improved PMU more precisely be enhanced and the monitoring channel and temperature sensor is added. To verify the improved performance of the equipment, it is integrated to electric propulsion system of unmanned aerial vehicle. PMU is calibrated through the ground test. And PMU's performance is checked through the flight test.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.196-202
• /
• 2017

A very long test track is required for high-speed operation test of the real-scale Linear Synchronous Motor (LSM) for ultra-high-speed trains. The required length results in huge construction cost and economic loss if any error occurs during development. Therefore, validation study of the LSM design technology using a low-cost small-scale model must be carried out in the early research stages. It is possible to deduce an optimal winding method for the armature and determine the mechanical properties of the LSM through a performance tester that applies a rotary-type small-scale LSM model. In addition, it is possible to utilize previous research on LSM control systems. Therefore, a basic design model, comprising a rotary-type LSM tester that meets the requirements for the propulsion of 600km/h-class ultra-high-speed trains, is derived in this study. Finally, an optimal model, which has a stable structure under the condition of 1500rpm or more high-speed rotation, is derived by electromagnetic and mechanical stiffness analysis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.833-837
• /
• 2010

This study aims at finding an optimal exhaust diffuser design of a high altitude testing chamber for a low bypass turbofan engine (F404-402) with thrust pound force of 17,700 and air mass flow rate of 66kg/s ejecting at a speed of Mach 1.66. The final proposed ejector size has better pressure recovery characteristics and targets to reduce operational cost at engine performance testing. Conventional high altitude test chamber layout was adopted and first drawn in two dimensions using Autocad software so as to determine the gas path, the ejector frontal size was then determined from gas dynamics equations considering traditional gas ejection method where both the engine exhaust and cell cooling air are exhausted via the ejector. Modification to a smaller ejector with an alternative secondary cell cooling exhaust port was then performed and modelled in 3D using Solid Works software.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.560-562
• /
• 2017

This paper presents the development and test results of a test rig for confirming the hover performance of the coaxial propeller which is applied to the drone in order to carry out the mission that requires high payload such as the development of the courier drones. the performance of each propeller was measured by varying the thrust and torque according to the H/D ratio. the Thrust sensor and torque sensor were used to measure the thrust and torque generated when the propeller rotated, and a photo sensor was used to measure the rpm. it used the data acquisition system to acquire data from each sensor, and used the Labview softwaer to control data storage, monitoring and BLDC motor control. In the test, each propeller meansured the figure of mefit according to the chansge of the interval at the same rpm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.637-637
• /
• 2015

2009년 미국에서 처음으로 스마트워터그리드의 개념이 도입된 이후로 국내외 국가 기관뿐만 아니라 민간 기업에서도 스마트워터그리드에 대한 관심이 높아지고 있다. 현재 스마트워터그리드는 IBM의 진출을 시작으로 Veolia, Suez 등 다국적 물관리 기업들이 사업을 추진 중이다. 국내의 ICT기술과 수자원시스템의 융합을 통하여 용수 수요 공급량을 실시간으로 파악하고 관리하여 수자원의 지역적 시간적 격차를 해소하는 스마트워터그리드 연구가 국내에서도 진행 중이다. 물관리 시장 주도권을 확보하기 위해 글로벌 물기업간 경쟁이 심화되고 있으며, 개별플랫폼을 구축 활용하여 신규기업의 물산업 진출을 가로막고 있는 실정이다. 이러한 상황에서 국외 물산업 시장 진출을 위하여 통합플랫폼 개발 및 체계적인 데이터 구조 설계가 필요하며, 본 연구는 스마트워터그리드를 운영하기 위해 여러 곳에 분산되어 관리 운영되어지고 있는 수자원 및 물관리 데이터의 통합을 위한 체계적인 데이터베이스 구조설계에 대한 연구를 수행하였다. 이에 본 연구에서는 스마트워터그리드 도메인 내에 주력하고 있는 통합데이터베이스 구조를 외부 데이터 마이닝과 연계하여 확장하는 구조로 현실적이고 단기적인 데이터 통합효과를 위해 ETL/데이터웨어하우스방식을 적용하여 데이터 통합을 추진하였다. 지자체간 분산되어 있는 데이터베이스간의 연동은 관련 법제도 및 지자체간 협의 등 다양한 문제가 연루되어 있어 단기적으로는 B2B 데이터 연동방식을 응용하여 구성하였다. 광역 중앙 제어를 위한 통합데이터베이스는 가상DB 방식을 고려하였으며, 이는 지자체별로 구성된 통합DB에 대한 인터페이스 및 Wrapper 플랫폼을 적용하였다. 이 플랫폼간의 연동은 WaterML2.0을 적용함으로써 단기간내 구현이 가능하도록 하고 상호운용성에 문제를 해결하며, 실시간 데이터 연계를 추구하였다. 본 연구를 통해서 궁극적으로는 수자원 및 물관리 데이터의 통합을 위해 해당플랫폼에서 스키마 맵핑, 프로토콜 변환 정합 등을 실시하며, 실시간 데이터 마이닝 및 통합이 가능하도록 구성함으로써 향후 스마트워터그리드의 빅데이터 플랫폼 개발까지 확장해나갈 수 있을 것으로 기대된다.